Search found 1287 matches

by SteveNelson46
Sat Jul 31, 2021 5:52 pm
Forum: Aspire - General
Topic: Plane cut 3d model above a specific Z value
Replies: 9
Views: 175

Re: Plane cut 3d model above a specific Z value

This is the procedure I use to plane the material to an exact thickness. It works for planing the spoilboard also. In the job setup, set the material thickness to the desired finished thickness and z-zero to the machine bed Create a pocket toolpath slightly larger that the material to be cut with a ...
by SteveNelson46
Fri Jul 30, 2021 5:09 pm
Forum: Aspire - Gallery
Topic: Another Staved Project
Replies: 8
Views: 224

Re: Another Staved Project

It's plain to see that this project took a lot of planning and assembly time. FWIW, am very impressed.
by SteveNelson46
Fri Jul 30, 2021 4:55 pm
Forum: Aspire - General
Topic: V11 - Create Component from Toolpath preview - Glitch?
Replies: 14
Views: 523

Re: V11 - Create Component from Toolpath preview - Glitch?

I sent a test file to tech support and their answer was: Hello Steve, "Many thanks for your inquiry, I am currently looking into this for you. A way around this is to use the Clear area of selected components outside selected vectors tool, Please see screenshot: https://www.screencast.com/t/HxEyP5z...
by SteveNelson46
Fri Jul 30, 2021 4:24 pm
Forum: VCarve - Gallery
Topic: Crayon Clock
Replies: 7
Views: 150

Re: Crayon Clock

Michael has some really great projects and your version of the "Crayon Clock" turned out very nice. My complements to your wife on the painting.
by SteveNelson46
Fri Jul 30, 2021 4:18 pm
Forum: VCarve - General
Topic: Golf awards and door prize
Replies: 6
Views: 179

Re: Golf awards and door prize

I'm not a golf player but the plaques and tee look really great.
by SteveNelson46
Fri Jul 30, 2021 4:14 pm
Forum: VCarve - Gallery
Topic: Barn
Replies: 4
Views: 181

Re: Barn

Very Nice!
by SteveNelson46
Fri Jul 30, 2021 2:14 am
Forum: Aspire - General
Topic: V11 - Create Component from Toolpath preview - Glitch?
Replies: 14
Views: 523

Re: V11 - Create Component from Toolpath preview - Glitch?

I sent a test file to tech support and their answer was: Hello Steve, "Many thanks for your inquiry, I am currently looking into this for you. A way around this is to use the Clear area of selected components outside selected vectors tool, Please see screenshot: https://www.screencast.com/t/HxEyP5zC...
by SteveNelson46
Fri Jul 30, 2021 12:57 am
Forum: Aspire - General
Topic: V11 Installing 11.005 Patch
Replies: 12
Views: 409

Re: V11 Installing 11.005 Patch

Mine failed also until I disabled Malwarebytes. I always have to temporarily disable it when installing upgrades. It is possible to include the installer in the "Allow List" but since the installer names aren't always the same it's just easier to temporarily disable it.
by SteveNelson46
Thu Jul 29, 2021 3:40 am
Forum: Aspire - General
Topic: V11 - Create Component from Toolpath preview - Glitch?
Replies: 14
Views: 523

Re: V11 - Create Component from Toolpath preview - Glitch?

Thanks for the replies, guys! One thing I forgot to mention was that I was using a moulding toolpath to create my model, whereas I normally use the Create Shape tools when I make a model, and I had never used a moulding toolpath before, so I am unfamiliar with how it would "normally" be done and lo...
by SteveNelson46
Thu Jul 29, 2021 3:28 am
Forum: Aspire - General
Topic: V11 - Create Component from Toolpath preview - Glitch?
Replies: 14
Views: 523

Re: V11 - Create Component from Toolpath preview - Glitch?

Using Aspire V.11, I created a model and did a preview toolpath. I then double clicked on the waist part(s) of the preview toolpath to remove the extra material. Then I created a component using "Create Component from Toolpath Preview". I did a "Save As" and renamed the resulting component, and whe...
by SteveNelson46
Wed Jul 28, 2021 10:15 pm
Forum: Aspire - General
Topic: V11 - Create Component from Toolpath preview - Glitch?
Replies: 14
Views: 523

Re: V11 - Create Component from Toolpath preview - Glitch?

The same thing happens with me. I think Vectric needs to take a look at it.
by SteveNelson46
Sun Jul 25, 2021 11:14 pm
Forum: VCarve - General
Topic: new user not sure where to start
Replies: 18
Views: 635

Re: new user not sure where to start

To view the toolpaths setup, double click on the toolpath name and that will bring up the toolpath setup screen. On the left side there will be lines (vectors) in red that are associated with the toolpath. Text fonts are usually made up of 2 lines separated by a small space. That space determines ho...
by SteveNelson46
Sun Jul 25, 2021 5:43 pm
Forum: VCarve - General
Topic: new user not sure where to start
Replies: 18
Views: 635

Re: new user not sure where to start

If this is the look you are trying to for, take a look at the toolpaths and the bits I used.
by SteveNelson46
Sat Jul 24, 2021 6:13 pm
Forum: VCarve - General
Topic: Joining two circles
Replies: 6
Views: 227

Re: Joining two circles

You also have an extraneous circle quite a ways out from center.
by SteveNelson46
Sat Jul 24, 2021 6:01 pm
Forum: Aspire - Gallery
Topic: African Safari Collection
Replies: 8
Views: 223

Re: African Safari Collection

I really like making boxes. Jewlery, toys, etc. and I really, really like the way yours turned out. Nice job on the design too.