Search found 1281 matches

by SteveNelson46
Fri Jul 30, 2021 2:14 am
Forum: Aspire - General
Topic: V11 - Create Component from Toolpath preview - Glitch?
Replies: 10
Views: 287

Re: V11 - Create Component from Toolpath preview - Glitch?

I sent a test file to tech support and their answer was: Hello Steve, "Many thanks for your inquiry, I am currently looking into this for you. A way around this is to use the Clear area of selected components outside selected vectors tool, Please see screenshot: https://www.screencast.com/t/HxEyP5zC...
by SteveNelson46
Fri Jul 30, 2021 12:57 am
Forum: Aspire - General
Topic: V11 Installing 11.005 Patch
Replies: 9
Views: 188

Re: V11 Installing 11.005 Patch

Mine failed also until I disabled Malwarebytes. I always have to temporarily disable it when installing upgrades. It is possible to include the installer in the "Allow List" but since the installer names aren't always the same it's just easier to temporarily disable it.
by SteveNelson46
Thu Jul 29, 2021 3:40 am
Forum: Aspire - General
Topic: V11 - Create Component from Toolpath preview - Glitch?
Replies: 10
Views: 287

Re: V11 - Create Component from Toolpath preview - Glitch?

Thanks for the replies, guys! One thing I forgot to mention was that I was using a moulding toolpath to create my model, whereas I normally use the Create Shape tools when I make a model, and I had never used a moulding toolpath before, so I am unfamiliar with how it would "normally" be done and lo...
by SteveNelson46
Thu Jul 29, 2021 3:28 am
Forum: Aspire - General
Topic: V11 - Create Component from Toolpath preview - Glitch?
Replies: 10
Views: 287

Re: V11 - Create Component from Toolpath preview - Glitch?

Using Aspire V.11, I created a model and did a preview toolpath. I then double clicked on the waist part(s) of the preview toolpath to remove the extra material. Then I created a component using "Create Component from Toolpath Preview". I did a "Save As" and renamed the resulting component, and whe...
by SteveNelson46
Wed Jul 28, 2021 10:15 pm
Forum: Aspire - General
Topic: V11 - Create Component from Toolpath preview - Glitch?
Replies: 10
Views: 287

Re: V11 - Create Component from Toolpath preview - Glitch?

The same thing happens with me. I think Vectric needs to take a look at it.
by SteveNelson46
Sun Jul 25, 2021 11:14 pm
Forum: VCarve - General
Topic: new user not sure where to start
Replies: 18
Views: 608

Re: new user not sure where to start

To view the toolpaths setup, double click on the toolpath name and that will bring up the toolpath setup screen. On the left side there will be lines (vectors) in red that are associated with the toolpath. Text fonts are usually made up of 2 lines separated by a small space. That space determines ho...
by SteveNelson46
Sun Jul 25, 2021 5:43 pm
Forum: VCarve - General
Topic: new user not sure where to start
Replies: 18
Views: 608

Re: new user not sure where to start

If this is the look you are trying to for, take a look at the toolpaths and the bits I used.
by SteveNelson46
Sat Jul 24, 2021 6:13 pm
Forum: VCarve - General
Topic: Joining two circles
Replies: 6
Views: 223

Re: Joining two circles

You also have an extraneous circle quite a ways out from center.
by SteveNelson46
Sat Jul 24, 2021 6:01 pm
Forum: Aspire - Gallery
Topic: African Safari Collection
Replies: 8
Views: 220

Re: African Safari Collection

I really like making boxes. Jewlery, toys, etc. and I really, really like the way yours turned out. Nice job on the design too.
by SteveNelson46
Fri Jul 23, 2021 5:56 pm
Forum: VCarve - General
Topic: VCarve Desktop & Pro Version 11 are OUT NOW
Replies: 25
Views: 1103

Re: VCarve Desktop & Pro Version 11 are OUT NOW

Daz2264 wrote:
Fri Jul 23, 2021 1:38 am
I too have downloaded it. Seems to download ok and install ok but won't start up.
Tried runing it as admin and still wont start.

Any ideas?
Turn off Malwarebytes before installing.
by SteveNelson46
Thu Jul 22, 2021 11:20 pm
Forum: Aspire - General
Topic: Missing Toolpath List in Preview
Replies: 4
Views: 185

Re: Missing Toolpath List in Preview

Thanks Steve. Your solution didn't work as I was already at max screen size. I'm using a 65" monitor set at 300 % magnification (recommended by the manufacturer). So I tried playing with the custom magnification settings. I set it to 275% and that worked so I started increasing it a little at a time...
by SteveNelson46
Thu Jul 22, 2021 8:16 pm
Forum: Aspire - General
Topic: Missing Toolpath List in Preview
Replies: 4
Views: 185

Re: Missing Toolpath List in Preview

This is a screenshot from V10.5. I only have 1 sheet.
by SteveNelson46
Thu Jul 22, 2021 7:50 pm
Forum: Aspire - General
Topic: Missing Toolpath List in Preview
Replies: 4
Views: 185

Missing Toolpath List in Preview

Has the show toolpath list in the preview screen been removed in V11? I turned it on in v10.5 but I can't find it in V11. Well, to be honest I can't find it in v10.5 again either.
by SteveNelson46
Wed Jul 21, 2021 7:17 pm
Forum: VCarve - Gallery
Topic: Rotary - The Puppy
Replies: 18
Views: 390

Re: Rotary - The Puppy

Very nice indeed. Did you create your own model? What was the carving time?
by SteveNelson46
Mon Jul 19, 2021 4:19 pm
Forum: VCarve - Gallery
Topic: Hearts
Replies: 8
Views: 342

Re: Hearts

You are quite welcome. It came out really nice.