Any idea what the secret formula is that determines the length of move at a certain zoom level?The arrow keys will move by a distance that is a factor of how zoomed you are in. The arrow keys will move by a distance that is a factor of how zoomed you are in.
Search found 1108 matches
- Sat Dec 05, 2020 8:34 pm
- Forum: Aspire - General
- Topic: Nudge
- Replies: 5
- Views: 1830
Re: Nudge
- Sun Nov 08, 2020 5:27 pm
- Forum: Aspire - General
- Topic: Design for hire
- Replies: 4
- Views: 1738
Re: Design for hire
I'd specify Lexan rather than acrylic. Acrylic is too brittle. Also, Lexan mills better.
- Tue Aug 11, 2020 5:06 pm
- Forum: Aspire - General
- Topic: 10.5 and xp
- Replies: 59
- Views: 17282
Re: 10.5 and xp
Release notes say that 10.506 now runs on XP. Anybody confirm that?
- Sun Jul 12, 2020 5:23 pm
- Forum: Aspire - General
- Topic: 10.5 and xp
- Replies: 59
- Views: 17282
Re: 10.5 and xp
Finally got trial Aspire 10.5 to work. Loaded and edited one of the sample files on a Win 7 machine and saved cut files to a thumb drive and then out to the shop and loaded those onto the XP machine that runs the CNC. "Only" had to run back and forth 3 times to make tweaks to the files. But it did c...
- Fri Jul 10, 2020 9:19 pm
- Forum: Aspire - General
- Topic: 10.5 and xp
- Replies: 59
- Views: 17282
Re: 10.5 and xp
Michael Tyler, "I use a very old laptop with XP as my ShopBot controller computer in the shop." I have a similar set up. XP has plenty of horsepower to run my CNC. I do have a "real" computer in the house, but many times need to tweak a file just before running it--very inconvenient to go up just to...
- Fri Jul 10, 2020 8:07 pm
- Forum: Aspire - General
- Topic: 10.5 and xp
- Replies: 59
- Views: 17282
Re: 10.5 and xp
I have the same problem. I tried on two different computers and get:
Error " the procedure entry point IntializeCriticalSectionEx could not be located in the dynamic link library KERNEL.32.dll."
All old versions up thru 10.0 worked OK, but 10.5 stops immediately with the above error.
Error " the procedure entry point IntializeCriticalSectionEx could not be located in the dynamic link library KERNEL.32.dll."
All old versions up thru 10.0 worked OK, but 10.5 stops immediately with the above error.
- Tue Jun 23, 2020 12:40 am
- Forum: Aspire - Tips and Tricks
- Topic: tracing a backhoe bucket part
- Replies: 5
- Views: 2680
Re: tracing a backhoe bucket part
I think he said it was 2000 watts. Really nice edge finish on 3/8" steel.
- Tue Jun 23, 2020 12:32 am
- Forum: Aspire - Tips and Tricks
- Topic: tracing a backhoe bucket part
- Replies: 5
- Views: 2680
Re: tracing a backhoe bucket part
Drew this up in Aspire and had a local laser company cut the pieces.
- Mon Mar 09, 2020 3:49 am
- Forum: VCarve - General
- Topic: dovetails using CNC
- Replies: 19
- Views: 7835
Re: dovetails using CNC
The other vectors.
- Sat Mar 07, 2020 11:54 pm
- Forum: VCarve - General
- Topic: dovetails using CNC
- Replies: 19
- Views: 7835
Re: dovetails using CNC
Sure. IIRC I left 1/100" space for fitting and glue.
- Sun Mar 01, 2020 3:17 pm
- Forum: Aspire - General
- Topic: layout newbee
- Replies: 13
- Views: 3573
Re: layout newbee
Many times "Newbees," as you call yourself, don't yet know enough to ask the right question nor answer one that conveys the needed info. This is one of the best boards for solving problems--just ignore John before his morning coffee. :wink: Anyway, if you do a tight nest and the project pieces still...
- Fri Feb 14, 2020 1:42 am
- Forum: Aspire - Gallery
- Topic: Blanket Chest
- Replies: 13
- Views: 4983
Re: Blanket Chest
Getting the board plumb and indexed properly for cutting must be challenging, I don't see any stops or plumb adjustments. One clamp doesn't seem adequate to prevent slippage during milling. Can you share some insight into how you manage your setup? Dovetails and box joints are finicky little things...
- Thu Feb 13, 2020 10:45 pm
- Forum: Aspire - Gallery
- Topic: Blanket Chest
- Replies: 13
- Views: 4983
Re: Blanket Chest
Dovetail is more of a bear ear.
- Thu Feb 13, 2020 6:17 pm
- Forum: Aspire - Gallery
- Topic: Blanket Chest
- Replies: 13
- Views: 4983
Re: Blanket Chest
Thanks, guys. Here's the info on the "dovetails." The front is cut vertically thru a hole in the bed. The two sides are cut conventionally--flat on the bed. Those vectors are enlarged by 0.01" to allow for fitting and glue. Depth of both cuts was 3/4" to match the board thickness. .DXF's are for a 0...
- Wed Feb 12, 2020 5:21 pm
- Forum: Aspire - Gallery
- Topic: Blanket Chest
- Replies: 13
- Views: 4983
Blanket Chest
Rather than hijack a V-carve post on dovetails, I'll post here. This is a hickory chest. Large top compartment and drawer below. You probably recognize the eagle on the drawer front. I also V-carved around the outline of the drawer pulls. Dovetail is more of a bear ear. Each hickory plank runs aroun...