Vectric Customer

Phoenix. Great weather in Oct. - wives would love it. Don't forget spring training
Dave

I have a 0.75" piece of material where I want a zero plane down 0.25" from the top. Do I add a zero plane with a base of 0.25"? Do I subtract a zero plane 0.25"? Also, if I want to place an object on the zero plane, do I add it to the zero plane? or do I give the object a negative base height? Any h...

Hi folks
Take a look at http://www.3ders.org/3d-scanning.html Lots of info on scanners.

Cheers
Dave

I went with a Stinger 1 and couldn't be happier.
Dave

Paul

Another erector set type is www.pdjcnc.com

Dave

Angie
Thanks for the reply. I too have a K2 Z axis and have been happy with it. Due to the lack of replies, I am assuming that nobody has a complete machine thus no comments on the K2 control system.
Thanks again
Dave

Am considering the K2 CNC router. Anyone have any experience with one?

Thanks
Dave

Bill Let me try again. If you slave the A axis to the Z axis in Mach, there is nothing to be changed in the G code generated by the pp. Mach will output identical pulses and directional info to the A axis. This does mean that you will need an additional driver, motor, and cabling for the A axis. Ass...

Tim
Thanks so much for your reply. I shall watch the tutorials.

Thanks again

Dave

I know I'm not the sharpest knife in the drawer, but how do I create a 3D object from image?

Thanks
Dave

Mach has a feature where you can slave a controllers.

Dave

I too had a similar problem that was solved by lowering the aceleration and speed of the z axis
Dave

If you don't find a loose coupling, try adjusting the acceleration and velocity in Mach.

Dave

Don't know if this helps, but I had the same problem using Mach3. I keept lowering the velocity and acceleration until the problem went away. Not very scientific, but it solved the problem.

Dave

Ouch

Dave