Search found 16 matches
- Wed May 22, 2013 10:41 pm
- Forum: VCarve - General
- Topic: programing vcarvepro
- Replies: 10
- Views: 4655
Re: programing vcarvepro
thank you for breaking it down. very astute. I do not have any particular thing but see these beautiful carvings etc and want to learn . I have vcarvepro , and vectorart3d starter. I will do as you suggest and dig into them. thanks for your help. Jim Jim, I think I "see" your question. It is actuall...
- Sat May 18, 2013 10:35 pm
- Forum: VCarve - General
- Topic: programing vcarvepro
- Replies: 10
- Views: 4655
programing vcarvepro
I am a new user and my questions probably seem silly but here goes. How does a person get the items to carve. I have vcarve 6.0. and :lol: shark pro. I have been able to use the software to carve names and such but do not know how a person gets the beautiful drawings and carvings of figures etc? are...
- Mon Oct 03, 2011 1:48 am
- Forum: Cut3D - General
- Topic: digitizing probe
- Replies: 2
- Views: 2207
Re: digitizing probe
tony; thankx for the info, however I could not find the manual download in the sites you gave me. I will go to the forum and check it out. I am not sure if I have to buy the software, as when I bought the machine ithe probe was also purchased. The software I have is cut 3Dversion 1.025, and vector a...
- Sun Oct 02, 2011 1:09 am
- Forum: Cut3D - General
- Topic: digitizing probe
- Replies: 2
- Views: 2207
digitizing probe
when i purchased my sharkpro i also purchased a probe. i want to use the probe now however the software dvd vector art 3D starter is the disk that i have.I also have the cut 3d version 1.025. my question. I am unable to find the operating manual for that program.I have looked on the internet but uns...
- Sun Sep 18, 2011 9:35 pm
- Forum: VCarve - General
- Topic: cribbage board drilling
- Replies: 3
- Views: 2229
Re: cribbage board drilling
thanks Glen however I should be more specific. I understand that the machine will drill size etc, what I am questioning is how do you create a large series of holes and make them in a circle and then drill all of them in one toolpathe operation? the circle I am referencing is in the help section, un...
- Fri Sep 16, 2011 9:24 pm
- Forum: VCarve - General
- Topic: cribbage board drilling
- Replies: 3
- Views: 2229
cribbage board drilling
I have viewed the cribbage board on one of the training videos, and would like to know how to indicate where the holes are drilled. specifically how to mark each hole to be drilled, as well as how do they put them in a circle. I learned a lot in that tips and tricks session but it did not show that ...
- Sat Aug 20, 2011 11:36 pm
- Forum: Control Software related questions
- Topic: CNC not returning to home position
- Replies: 1
- Views: 2258
CNC not returning to home position
I am a novice. The cnc program will not return to the home position after running a program. I have to jog the cnc to begin another toolpath on the same material. I have another problem, in that the cnc will omit one letter of a name and continue carving, and when finished will then return and carve...
- Sat Aug 20, 2011 11:35 pm
- Forum: Control Software related questions
- Topic: CNC not returning to home position
- Replies: 1
- Views: 2182
CNC not returning to home position
I am a novice. The cnc program will not return to the home position after running a program. I have to jog the cnc to begin another toolpath on the same material. I have another problem, in that the cnc will omit one letter of a name and continue carving, and when finished will then return and carve...
- Sun Jul 31, 2011 9:54 pm
- Forum: PhotoVCarve - General
- Topic: vcarve pro cutting depth
- Replies: 3
- Views: 3552
vcarve pro cutting depth
I am trying to use v carve pro, and I am getting a pop up warning that the vcarve 1 will cut through the material. I don't know how to change the depth to cancel this warning. I am entering a .15 cutting depth. Help what gives. I also am confused about , what is a *tap file in the cnc area. I have y...
- Sat Nov 06, 2010 4:41 pm
- Forum: Hardware related questions
- Topic: cnc shark pro plus/ router won't drop into work
- Replies: 1
- Views: 2689
cnc shark pro plus/ router won't drop into work
I am new to this machining. I have a cnc shark pro plus. My first problem was that I had the gantry on in reverse, which would carve upside down backwards. I changed the gantry, and now using the same setup, the router won't decend into the wood. it runs as if it was carving but I can't really deter...
- Sat Oct 16, 2010 9:48 pm
- Forum: VCarve - General
- Topic: mirror image
- Replies: 2
- Views: 1510
mirror image
I am using the vectric sample software the "Bullshead" sign which is the sign shown in the tutorial . I have the SharkProPlus controler. The sign carved in a mirror image. With all of my other problems getting started learning to use this tool I guess that should not have surprised. Any ideas to hel...
- Fri Oct 15, 2010 11:11 pm
- Forum: VCarve - General
- Topic: sample prints in mirror image
- Replies: 1
- Views: 1305
sample prints in mirror image
I am new to this and was so elated when the machine started to cut that until it had finnished cutting the Bullshead sample did I realize that it printed upside down and reverse. I don't believe that anything changed when I loaded to the machine, so what do I do to print the right way. also when I a...
- Tue Oct 12, 2010 10:41 pm
- Forum: Cut2D - General
- Topic: Importing files
- Replies: 2
- Views: 2141
Importing files
I am so new that I have yet to carve anything. How do I get a carving toolpath to the new wave program ? I am also getting an unknown g code on line 1 ERROR CODE, when I ty to load a file. Must I create :oops: a new file someplace in my computer to save the tool path file? the file extension on my t...
- Sat Oct 09, 2010 5:18 pm
- Forum: VCarve - General
- Topic: newbe to vcarve pro.
- Replies: 2
- Views: 1525
newbe to vcarve pro.
Anyone:I am new to this vcarvepro. I have yet to get the machine to work. I have designed a simlpe sign, and when i save the tool path I get a .crv extension. the other question is where do I save the file? and when I load the G file I get an error message saying one illegal character. the sign is T...
- Sat Oct 02, 2010 5:26 pm
- Forum: Hardware related questions
- Topic: apple computer
- Replies: 2
- Views: 1955
apple computer
does the software support apple. jim westergard