Search found 210 matches
- Fri Dec 04, 2020 7:37 pm
- Forum: Aspire - General
- Topic: Dragknife Gadget help please
- Replies: 2
- Views: 202
Dragknife Gadget help please
Hey all. I have the latest version of Aspire setup. Have purchased a Roland Type dragknife, but have yet to get anything beyond an Error Creating Toolpath when using the dragknife gadget. So I have setup a 12 x 12 square that measures .004 (thickness of my vinyl). On here, I have put a simple 8" let...
- Thu Sep 17, 2020 8:09 pm
- Forum: Aspire - General
- Topic: Tool sequence not correct
- Replies: 3
- Views: 372
Re: Tool sequence not correct
Update:
Solved my issue. ended up modifying the Header of the Post Processor to read "M6 T[T]" instead of just "T [T]" Apparently Carbide Motion cannot read just for a T command and will only recognize the line if it has an M6 as part of it.
Solved my issue. ended up modifying the Header of the Post Processor to read "M6 T[T]" instead of just "T [T]" Apparently Carbide Motion cannot read just for a T command and will only recognize the line if it has an M6 as part of it.
- Thu Sep 17, 2020 7:41 pm
- Forum: Aspire - General
- Topic: Tool sequence not correct
- Replies: 3
- Views: 372
Tool sequence not correct
Ok experts. need some problem solving help with this one. I saved a gcode that uses 3 tools for the carve and have then numbered as #301, #303, and #201 in that order. I looked at the .gcode with notepad ++ and see this: Line 1 T301 Line 50028 M6 T303 Line 484591 M6 T201 Those 3 lines are as they sh...
- Wed Sep 02, 2020 2:56 pm
- Forum: Laser Module - General
- Topic: Pass-Thru option
- Replies: 1
- Views: 312
Pass-Thru option
Have spent quite an amount of time manipulating / editing an image using my favorite image editing software and using the associated plug-ins etc. The laser module needs to have a pass-thru setting available. I do not need any further dithering, rastering etc beyond what I already have in the edited...
- Tue May 05, 2020 3:25 pm
- Forum: Aspire - General
- Topic: error message in 10.021
- Replies: 19
- Views: 1941
Re: error message in 10.021
Got it workingMikeUSNRet wrote: ↑Tue May 05, 2020 2:37 pmI just installed 10.022 update for Aspire and am still getting the error message about not finding the post_base file Does that mean one would need to uninstall Aspire and start all over again?
- Tue May 05, 2020 2:37 pm
- Forum: Aspire - General
- Topic: error message in 10.021
- Replies: 19
- Views: 1941
Re: error message in 10.021
I just installed 10.022 update for Aspire and am still getting the error message about not finding the post_base file Does that mean one would need to uninstall Aspire and start all over again?
- Fri Feb 14, 2020 12:24 am
- Forum: Aspire - General
- Topic: Aztec Calendar
- Replies: 16
- Views: 1826
Re: Aztec Calendar
If you have Aspire why would you need that program? It's so easy to just make a dome and project the v-carve toolpaths onto it. While I do have Aspire and can easily do this, I have a friend that does not have Aspire and it is a bit out of his budget at the moment Was looking for this doming progra...
- Wed Feb 12, 2020 9:21 pm
- Forum: Aspire - General
- Topic: Aztec Calendar
- Replies: 16
- Views: 1826
Re: Aztec Calendar
Thank you for all the replies but I already have the files for the calendars themselves. What I'm looking for is a stand alone program that was out there where you would load in the gcode into and it would spit out a modified code that had just a slight dome on it.. Just can't recall where I origina...
- Wed Feb 12, 2020 3:53 pm
- Forum: Aspire - General
- Topic: Aztec Calendar
- Replies: 16
- Views: 1826
Aztec Calendar
Hello Guys and Gals, I recall reading several years ago during a major Aztec Calendar push, that one of the members of this site at the time had posted a file that would modify the .dxf to output a calendar that was domed. I have done a search through the forums here and cannot find any ref to it an...
- Wed Jan 22, 2020 2:51 pm
- Forum: Post Processors
- Topic: Shapeoko Post Processors
- Replies: 2
- Views: 1249
Shapeoko Post Processors
Shapeoko has recently introduced a bit setter that will re-zero Z after each tool change, but the shapeoko PP's do not allow for toolchanges to be in the same saved file. Looking for a PP that will work with GRBL on the shapeoko and allow for multiple tools in the same file or a way to edit the curr...
- Fri Jan 10, 2020 5:36 pm
- Forum: Aspire - General
- Topic: Box Creator gadget
- Replies: 5
- Views: 1262
Box Creator gadget
I have been attempting to create a simple 4 sided box without a lid that is 5" square in 1/2" ply. Using a .125 endmill yet each time I have cut one out not a single one of the box joints will fit as pins are all being cut over-sized and 100% of them needs to be trimmed down on my bandsaw. Qute a bi...
- Mon Dec 09, 2019 4:40 pm
- Forum: Aspire - General
- Topic: 3D Model Club
- Replies: 1
- Views: 805
3D Model Club
Have been away from the CNC world for a bit, but now getting back into it...
Anyhow.. Does anybody know what happened to the 3D Model Club website or where, if at all, it can be found?
Mike
Anyhow.. Does anybody know what happened to the 3D Model Club website or where, if at all, it can be found?
Mike
- Sun Dec 08, 2019 5:47 pm
- Forum: Cut2D - General
- Topic: The New Map Thread - Show us where you are in the world
- Replies: 905
- Views: 2525125
Re: The New Map Thread - Show us where you are in the world
No longer in Colorado where this map shows me to be.
How does it get updated to the new location?
Now in
Phil Campbell, AL 35581
How does it get updated to the new location?
Now in
Phil Campbell, AL 35581
- Thu Aug 08, 2013 3:51 am
- Forum: Aspire - General
- Topic: CMLEADERSTYLE ?
- Replies: 4
- Views: 1977
Re: CMLEADERSTYLE ?
I didn't create the .dxf files..they are from someone else and just a basic line drawing really..no associated tool paths or any cut depths. Just says CMLEADERSTYLE error no other codes listed along with it. They seem to load ok so guess won't worry about it then.
- Wed Aug 07, 2013 6:19 am
- Forum: Aspire - General
- Topic: CMLEADERSTYLE ?
- Replies: 4
- Views: 1977
Re: CMLEADERSTYLE ?
101 views and not even the Vectric folks have any idea?