Vectric Customer

hi Adrian i will sit tomorrow and carefully go over everything again nothing was moved over to the new ver 11.5 i even had to recreate my machine tomorrow will be more of a slow day so ill do everything from scratch and see if i made a mistake somewhere thanks for all your help so far i will post a...

hi
This is my google maps location

https://www.google.com/maps/place/LD+Cu ... 32.4482658

thank you

Dimitri

Hi All i have just done a test and its looking good at first it looked like it was taking a dive into the material but it stopped just above and started the spindle and did the cut. i think when i did my update from ver11 to ver11.5 some how it or i chose the wrong post processors and thats what was...

Hi Guys just finished removing all the post processors and setting them up again Gcode looks good now says its Vectric ver11 and post processor ver 1.2 here are the new files can someone please check and see if its the same as they have on there Gcode output file of Vectric ver11.5 i will do a test ...

Hi Guys
it looks like it could be the post processor that was copied over or its just a bad copy ill delete them and create new ones and see if it works i will also look at my older gcode files to see what ver is used

thanx for all the help
let you know if i find something

Dimitri

hi Adrian i will sit tomorrow and carefully go over everything again nothing was moved over to the new ver 11.5 i even had to recreate my machine tomorrow will be more of a slow day so ill do everything from scratch and see if i made a mistake somewhere thanks for all your help so far i will post as...

Hi all
i have just added 2 new files created after i removed ver.9.5
can someone please tell me if it still says created in vectric/9.5

thanx
Dimitri
https://drive.google.com/drive/folders/ ... sp=sharing

Hi adze_cnc where do you see that it was created on 9.5 i have removed 9.5 from my pc i will try again tomorrow and see if it worked just a question ver 11 is still installed on my pc the new ver 11.5 did not remove it still there and it still works as normal ill try run the file on ver11 and see if...

Hi Adrian yes i ran it after i changed the tool numbers but it still did the same thing as soon as i choose a ball nose tool thats what happens if i choose a endmill no problem been going at this all day i have tried everything and i cant find why it would do this not only does it send my Z axis to ...

Hi all
here is the link to the files
both files gcode and aspire files
thanx
Dimitri
https://drive.google.com/drive/folders/ ... sp=sharing

hi Adrian
i did notice the tool numbers changed and i did change them all too tool 1 as before
i will see if i can zip it or dropbox it and post a like here

Thanx

hi all
ive tried to post the gcode files but they are too big if i can get an email add maybe i could send it
thanx.

Hi Adrian i have seen this problem before on ver9.5 would not work in mm but worked fine in inch it was not my machine so i did not say anything. i do not have anything on my controller software im using a MASSO controller have been for the last year, i have not changed anything else on my machine j...

hi Greg if it was a problem with material setup it would also do the same thing when i choose an end mill but when i chose an endmill with the same setup it works just fine only when i choose ball nose in the tool setup does it do that also another thing i failed to mention when i click to start the...

hi i downloaded the new 11.5 update today after i downloaded i ran a quick test to make sure everything was in order and as usual everything went well later i put in a customers job and all was well until i went for the finishing passes with a ball nose bit my machine would not start all it did was ...