Neither.
Search found 4587 matches
- Mon Apr 15, 2024 4:29 pm
- Forum: VCarve - General
- Topic: V12.004 - drag and drop DXF doesn't work
- Replies: 4
- Views: 137
- Sun Apr 14, 2024 1:15 am
- Forum: Aspire - General
- Topic: New Rotary Project
- Replies: 15
- Views: 1249
- Fri Apr 12, 2024 3:38 pm
- Forum: VCarve - General
- Topic: 1911 officer model grips
- Replies: 7
- Views: 281
Re: 1911 officer model grips
These are from my SW Pro Series, pretty darn sure it is Officer size (but I think it is actually called Commander, could be wrong about that)
- Fri Apr 12, 2024 3:25 pm
- Forum: VCarve - General
- Topic: Clipart Issue
- Replies: 2
- Views: 182
Re: Clipart Issue
Just tried it on my laptop, CND (could not duplicate).
Just thinking it may have to do with how you have your display settings in windows configured.
Just thinking it may have to do with how you have your display settings in windows configured.
- Fri Apr 12, 2024 3:19 pm
- Forum: Aspire - General
- Topic: V12: Dialog Bug/Crash?
- Replies: 21
- Views: 682
Re: V12: Dialog Bug/Crash?
Back in the day when I was writing software I did not have any bugs, just anomalies. I used that term for a reason. Even though I was the person who wrote the software it was possible that the software was doing exactly what I told it to do, but not what I had intended. The term BUG has an interesti...
- Fri Apr 12, 2024 2:03 pm
- Forum: Aspire - General
- Topic: V12: Dialog Bug/Crash?
- Replies: 21
- Views: 682
- Fri Apr 12, 2024 1:17 pm
- Forum: Aspire - General
- Topic: V12: Dialog Bug/Crash?
- Replies: 21
- Views: 682
Re: V12: Dialog Bug/Crash?
I wish people would stop creating posts with BUG in the title. After being here for about 17 years now, the percentage of posts claiming BUG that actually were a bug is really low. Also, most of the folks gleefully typing BUG in a post title are far from qualified to determine if an issue they are h...
- Thu Apr 11, 2024 6:20 pm
- Forum: VCarve - General
- Topic: VCarve Version 12 is OUT NOW 🎉
- Replies: 21
- Views: 1174
Re: VCarve Version 12 is OUT NOW 🎉
I had the same problem, take a look at this thread. . . I am not sure I remember exactly how I did it. . . but it works, LOL
viewtopic.php?f=29&t=43439&p=315010#p315010
viewtopic.php?f=29&t=43439&p=315010#p315010
- Thu Apr 11, 2024 12:36 am
- Forum: VCarve - General
- Topic: VCarve Version 12 is OUT NOW 🎉
- Replies: 21
- Views: 1174
Re: VCarve Version 12 is OUT NOW 🎉
...... It works best with 3d models or good pictures of 3d models. It can work with more general photographs, but it's not meant for that and the results may be less than appealing. It does a great job with 3d models, though. ..... I am gonna disagree with you a bit here. Sort of depends on what ty...
- Thu Apr 11, 2024 12:30 am
- Forum: Aspire - Gallery
- Topic: Collie using new Sketchcarve feature
- Replies: 11
- Views: 609
Re: Collie using new Sketchcarve feature
Did you try drawing a circle around what you want to carve, then clicking "Selected Vector(s)" under Machining Limit Boundary in the Sketchcarve dialog? That seemed to work for me. I am working with a bitmap, the Selected Vector does not work with that. If I try it the software posts a message that...
- Wed Apr 10, 2024 6:28 pm
- Forum: Aspire - Gallery
- Topic: Collie using new Sketchcarve feature
- Replies: 11
- Views: 609
Re: Collie using new Sketchcarve feature
Pretty incredible tool. Gave it a try and it seemed to work well except it insists on carving the boundary of the image itself. Screenshot 2024-04-10 121301.png Played around and could not seem to find a solution. Tried a few different file formats, etc. Hopefully I am missing something cause it is ...
- Tue Apr 09, 2024 10:22 pm
- Forum: VCarve - General
- Topic: Grbl in trial version
- Replies: 14
- Views: 423
Re: Grbl in trial version
....... I see now that each individual path must be saved, not an exported project output. ...... That is sort of not the case. If you have multiple tool paths that use the same tool they can be combined into one output file for the machine. Depending on the post, it is also possible on some machin...
- Tue Apr 09, 2024 6:26 pm
- Forum: VCarve - Tips and Tricks
- Topic: Bottoming out a collet nut
- Replies: 30
- Views: 4186
Re: Bottoming out a collet nut
Oh my, the dreaded "TReischl treament" !!!!Tex_Lawrence wrote: ↑Tue Apr 09, 2024 2:58 pmYep, if TReischl don't like something, then it gets the TReischl treatment.
It is a little early for it to be snowing. . . . .
- Mon Apr 08, 2024 10:26 pm
- Forum: VCarve - General
- Topic: Grbl in trial version
- Replies: 14
- Views: 423
Re: Grbl in trial version
Thanks for the quick response. I added the two GRBL post processors to the machine setup. I just don't see any option to export or save them. I checked out the link you mentioned, and it looks like they should just show up during either saving or exporting. I wonder if this is because I'm using the...
- Mon Apr 08, 2024 10:19 pm
- Forum: VCarve - Tips and Tricks
- Topic: Bottoming out a collet nut
- Replies: 30
- Views: 4186
Re: Bottoming out a collet nut
BTW, does anyone reading this thread think that this idea has not been thought about over at Vectric HQ?