Search found 765 matches

by tonydude919
Sat Jan 27, 2024 3:35 pm
Forum: VCarve - General
Topic: Files
Replies: 4
Views: 626

Re: Files

Yes you can as long as it's
rfl.png
Tony
by tonydude919
Mon Nov 21, 2022 5:50 pm
Forum: Aspire - General
Topic: Non flat material setup- can it be done in Aspire?
Replies: 16
Views: 4439

Re: Non flat material setup- can it be done in Aspire?

I have done a couple on a log. Take couple pics of log, the length, width, side view and measure it. Bring it in aspire create a model of it and take a 3D mode and add to it, or add lettering to it. Tony 244041248_1482992282078348_5875287865538264929_n.jpg 244624005_1482992208745022_3615235071787849...
by tonydude919
Sat Apr 30, 2022 3:58 pm
Forum: Aspire - General
Topic: Write me a program?
Replies: 17
Views: 3387

Re: Write me a program?

by tonydude919
Thu Apr 07, 2022 8:30 pm
Forum: VCarve - Gallery
Topic: My first endeavors with Corian
Replies: 4
Views: 1969

Re: My first endeavors with Corian

Hi guys,
They both came out very nice. I might have to try a speckled one.

Tony
by tonydude919
Wed Apr 06, 2022 6:35 pm
Forum: Aspire - Gallery
Topic: Slate coasters
Replies: 4
Views: 1574

Re: Slate coasters

It is a regal split font and the name I put in manual.

Tony
by tonydude919
Tue Apr 05, 2022 1:23 pm
Forum: Aspire - Gallery
Topic: Slate coasters
Replies: 4
Views: 1574

Slate coasters

Made some coasters out of slate. They are easy to carve with a diamond drag bit. I ran these at 130 ipm feed rate and no rpms. depth of carve is .015 deep. Used quick engrave toolpath with a hatch angle of 45 degs and stepover of .003 277993444_1604733366570905_6775536127938118774_n.jpg 277978066_16...
by tonydude919
Fri Feb 04, 2022 3:16 am
Forum: Aspire - Gallery
Topic: Leaf bowl
Replies: 8
Views: 2840

Re: Leaf bowl

I used a 1/4" endmill and 1/4" ball nose bits double sided. Took about 4-1/2 hrs.

Tony
by tonydude919
Thu Feb 03, 2022 7:25 pm
Forum: Aspire - Gallery
Topic: Leaf bowl
Replies: 8
Views: 2840

Leaf bowl

I made a leaf bowl that I seen on the vectric youtube channel and decided to make one. I made this out of white ash and I loved the grain pattern in the wood. The size is 18" long and 1-3/4" thick. Vectric did it in aspire 9 and I have aspire 11 and it was pretty easy to lay out the vectors and mode...
by tonydude919
Fri Feb 21, 2020 2:45 pm
Forum: PhotoVCarve - General
Topic: Shark Post Processor?
Replies: 2
Views: 14251

Re: Shark Post Processor?

Just go here and page down a little and there you have it. https://www.nextwaveautomation.com/downloads-links

Tony
by tonydude919
Sat Feb 01, 2020 5:47 am
Forum: Cut3D - General
Topic: Bowl.v3d sample file
Replies: 10
Views: 20471

Re: Bowl.v3d sample file

by tonydude919
Wed Jan 01, 2020 5:07 am
Forum: VCarve - General
Topic: Straight areas on curved letters & vectors
Replies: 16
Views: 4818

Re: Straight areas on curved letters & vectors

shark.PNG
You are using the wrong post processor for the shark, you have to use this one.

Tony
by tonydude919
Wed Aug 21, 2019 2:00 pm
Forum: VCarve - General
Topic: 3D modeling - simulation of border shows I've messed up
Replies: 9
Views: 2735

Re: 3D modeling - simulation of border shows I've messed up

minus.PNG
Use a minus sign in front of the number, it brings it closer to the object.

Tony