Vectric Customer

Hi Steve,
Would you mind explaining how you design/machine/toolpath your doors with 90 degree inside corners.

All the best James and thank you for all the hard work and help you have provided.

See if this works for V-Carve

Have you tried contacting the person you bought it from ..... what control software does the CNC use?

I have never heard of a DWC .... I would contact the manufacture and ask if they have a post processor that supports 4th axis that can be used with V-Carve Pro. All the 4th axis post processor does is wrap either the X or Y axis information into the A information (inches into degrees)

I use 0. 25 thick Corian and leave 0.030 remaining bottom thickness, working with Z0 on the bottom of the material (top of the spoilboard) make it easy.

http://forum.vectric.com/viewtopic.php? ... 13#p109513

The Wincnc touch will work on a CAMaster machine

GREAT work TR ........whoo, whoo

Your projects are looking really good Doug

That is a really nice looking table Jeff ........ good job

Here is another Youtube video by Jeff Searles

Thank you very much Dale for the GREAT construction and assembly pdf it's really well documented.

Thank you very much for all the files Dale, Where do you buy your wooden wheels

Do you know how to zero your router bit either to the top of the materiel on top of the spoilboard? I looked at your brand machine and it's not an ATC (automatic Tool Change) so you would have to save each toolpath as a separate file. Each time you load a new toolpath and router bit you have to set ...

Here are two lithophanes I did a while back using 1/4 Corian

http://forum.vectric.com/viewtopic.php? ... 13#p109513