Search found 5653 matches
- Mon Apr 22, 2024 6:34 pm
- Forum: Aspire - General
- Topic: curve tool
- Replies: 8
- Views: 327
Re: curve tool
Send your request to support@vectric.com
- Sun Apr 21, 2024 1:19 am
- Forum: VCarve - Gallery
- Topic: ColorCore Sign
- Replies: 2
- Views: 197
ColorCore Sign
The material is King ColorCore: 24"x23"X0.25", white over blue.
The section "Weather Forecasting Stone" was carved with a dull V-bit and left lots of fuzzies. The rest was carve with spiral upcut O flute bits (0.0625, 0.125, 0.25) and carved very well. This will be an outdoor sign.
The section "Weather Forecasting Stone" was carved with a dull V-bit and left lots of fuzzies. The rest was carve with spiral upcut O flute bits (0.0625, 0.125, 0.25) and carved very well. This will be an outdoor sign.
- Sat Apr 20, 2024 9:08 pm
- Forum: Aspire - General
- Topic: V12 Keep-Out Zones
- Replies: 3
- Views: 173
Re: V12 Keep-Out Zones
Here a test I did early on that showed that the XY move should happen before the Z drops down
- Sat Apr 20, 2024 8:32 pm
- Forum: Aspire - General
- Topic: V12 Keep-Out Zones
- Replies: 3
- Views: 173
Re: V12 Keep-Out Zones
If you have a clamp in the lower left, then it might be better to have XY home be in the center of the project. FYI, at the end of the file my machine, rather than going to XY home, returns to the machine park position which is Z at max machine height and XY is 3/4ths of the way to the back, towards...
- Sat Apr 20, 2024 5:16 pm
- Forum: Aspire - General
- Topic: double sided model thickness
- Replies: 8
- Views: 412
Re: double sided model thickness
We would love to see photos of the mandolin during the build process.
- Sat Apr 20, 2024 2:15 am
- Forum: VCarve - General
- Topic: Upgrade to V12.005 Refuses to start
- Replies: 2
- Views: 145
Re: Upgrade to V12.005 Refuses to start
V12.005 patch to 12.004 worked fine for me.
- Fri Apr 19, 2024 5:51 am
- Forum: Aspire - General
- Topic: curve tool
- Replies: 8
- Views: 327
Re: curve tool
it is integrated in the Draw Line/Polyline tool
Click and drag with the polyline tool to create a curved line, then press 'S' to make the next line straight
Click and drag with the polyline tool to create a curved line, then press 'S' to make the next line straight
- Fri Apr 19, 2024 4:25 am
- Forum: Aspire - General
- Topic: Draw curve tool
- Replies: 8
- Views: 340
Re: Draw curve tool
it is integrated in the Draw Line/Polyline toolWe need this back for sure!
Click and drag with the polyline tool to create a curved line, then press 'S' to make the next line straight
- Fri Apr 19, 2024 4:21 am
- Forum: VCarve - General
- Topic: Tool Database Ver. 11.5 to 12
- Replies: 10
- Views: 271
Re: Tool Database Ver. 11.5 to 12
Different machines.
The V12 database shows the machine: HCNC
The V11.5 database shows the machine: Imported
The V12 database shows the machine: HCNC
The V11.5 database shows the machine: Imported
- Thu Apr 18, 2024 4:13 pm
- Forum: VCarve - General
- Topic: Machining a hexagonal head with fourth axis
- Replies: 3
- Views: 171
Re: Machining a hexagonal head with fourth axis
Another method is to use the moulding toolpath with a Vector that is an "unwrapped" version of the hex head. You can either calculate the geometry, or find a tool that will generate the unwrapped vector.
The example below is in VCarve 11.5
The example below is in VCarve 11.5
- Thu Apr 18, 2024 12:24 am
- Forum: Aspire - Tips and Tricks
- Topic: Fun Topic: Artificial Intelligence (AI) Syntax
- Replies: 3
- Views: 294
Re: Fun Topic: Artificial Intelligence (AI) Syntax
Be aware that the Large Language Model (LLM) systems are non-deterministic. That means that you can give it the exact same input that you have used before, but get a different result. i.e. that magic words that were used before may yield different results later.
- Wed Apr 17, 2024 11:32 pm
- Forum: VCarve - General
- Topic: Tool Database Ver. 11.5 to 12
- Replies: 10
- Views: 271
Re: Tool Database Ver. 11.5 to 12
I'm not seeing the issue.
Can you post some screen shots (<Shift><Windows Key><S> to take a screenshot)
What toolpath are you using?
Can you post some screen shots (<Shift><Windows Key><S> to take a screenshot)
What toolpath are you using?
- Wed Apr 17, 2024 11:19 pm
- Forum: Aspire - General
- Topic: Fender Stratocaster Vector Needed
- Replies: 8
- Views: 272
Re: Fender Stratocaster Vector Needed
This thread might interest you: Fender Strat Build
- Tue Apr 16, 2024 8:01 pm
- Forum: VCarve - General
- Topic: .CRV3D files Can I download Them
- Replies: 1
- Views: 111
Re: .CRV3D files Can I download Them
No, those are Aspire files and cannot be read by VCarve.Can I use ".CRV3D" files?
- Tue Apr 16, 2024 8:00 pm
- Forum: Aspire - General
- Topic: double sided model thickness
- Replies: 8
- Views: 412
Re: double sided model thickness
This video may help. Pay particular attention to the sections on Zero Plan position, overcut distance, and limit planes. Bookmarks: ~ Orient 3D Model 01:58 ~ Zero Plane Position 05:28 ~ Overcut Distance 07:55 ~ Limit Planes 10:48 ~ Tabs 15:27 ~ Multi Sided View 19:22 ~ Dowels 19:47 ~ Toolpaths 21:50...