Upload the file too.
Was it reversed on the screen?
Some of those fonts with the @ in front of them do funky things.
Search found 1692 matches
- Tue Mar 26, 2024 7:22 pm
- Forum: VCarve - General
- Topic: text cutting backwards
- Replies: 7
- Views: 226
- Tue Mar 26, 2024 7:20 pm
- Forum: VCarve - General
- Topic: text cutting backwards
- Replies: 2
- Views: 130
Re: text cutting backwards
duplicate
- Fri Mar 22, 2024 12:45 pm
- Forum: Aspire - General
- Topic: Rotary machining time
- Replies: 11
- Views: 390
Re: Rotary machining time
My CNC will give me an estimate of the time before I cut. Then it will give me the actual time after I cut it. The 2 times are usually with 30 seconds of each other. These are the best way if you are using the time for estimates for calculating cost of a project. I have to ask the machine for these ...
- Fri Mar 22, 2024 12:39 am
- Forum: Aspire - General
- Topic: Rotary machining time
- Replies: 11
- Views: 390
Re: Rotary machining time
Under toolpath Summary what is your Scale Factor set to?
I don't have a rotary, but would imagine it is different that 2d 2.5 d and 3d times.
Are your other times in sink.
I don't have a rotary, but would imagine it is different that 2d 2.5 d and 3d times.
Are your other times in sink.
- Mon Mar 18, 2024 6:32 pm
- Forum: Aspire - General
- Topic: CNC Cut File for 3D Unicorn ASAP Please
- Replies: 4
- Views: 294
Re: CNC Cut File for 3D Unicorn ASAP Please
Additional details are required.
I assuming you bought the unicorn file.
How big do you want to make this project?
Are you looking for someone to generate the toolpaths for you?
You said VCarve or Aspire, which one do you have?
Double sided or single sided?
I assuming you bought the unicorn file.
How big do you want to make this project?
Are you looking for someone to generate the toolpaths for you?
You said VCarve or Aspire, which one do you have?
Double sided or single sided?
- Fri Mar 15, 2024 12:01 pm
- Forum: Aspire - General
- Topic: How to get More Cleaner finish
- Replies: 8
- Views: 674
Re: How to get More Cleaner finish
Its a spindle not a router, spindles are meant for longer runtimes. There are people out there with routers that would run this file w/o even thinking about resting their router. If you must split draw 2 or more overlapping squares and change your Machining Limit Boundary to Selected Vector . Select...
- Thu Mar 07, 2024 12:38 pm
- Forum: VCarve - General
- Topic: Default values in Tool Library
- Replies: 2
- Views: 218
Re: Default values in Tool Library
There is no one good value for any tool in the tool database. Depends on your machine , material being cut , size of threads , tool path type and how aggressive the operator is . The default values are starting points, adjust per the above five. I have different settings for my bits depending on wha...
- Tue Mar 05, 2024 8:02 pm
- Forum: Aspire - General
- Topic: Is there a way to do this
- Replies: 41
- Views: 2428
Re: Is there a way to do this
So this must be a copyright issue, but is there anyway we could see the file?
How about cutting away most of the column and capital and posting that with the toolpaths?
How about cutting away most of the column and capital and posting that with the toolpaths?
- Tue Mar 05, 2024 6:45 pm
- Forum: Aspire - General
- Topic: Is there a way to do this
- Replies: 41
- Views: 2428
- Tue Mar 05, 2024 5:11 pm
- Forum: Aspire - General
- Topic: Is there a way to do this
- Replies: 41
- Views: 2428
- Tue Mar 05, 2024 3:02 pm
- Forum: Aspire - General
- Topic: Is there a way to do this
- Replies: 41
- Views: 2428
Re: Is there a way to do this
Next most likely issue, don't take this the wrong way, you wouldn't be the first person to do this.
You told it you were using 1/32 TBN, Did you use 1/16 TBN?
You told it you were using 1/32 TBN, Did you use 1/16 TBN?
- Mon Mar 04, 2024 10:03 pm
- Forum: Aspire - General
- Topic: Is there a way to do this
- Replies: 41
- Views: 2428
Re: Is there a way to do this
My guess is your geometry for that bit doesn't match the actual bit.
That is why you don't see it in the preview.
Because it is taking more off means your bit is larger than you told it in the tool database.
That is why you don't see it in the preview.
Because it is taking more off means your bit is larger than you told it in the tool database.
- Fri Mar 01, 2024 9:49 pm
- Forum: Aspire - General
- Topic: Like button
- Replies: 11
- Views: 660
- Tue Feb 27, 2024 2:40 pm
- Forum: Aspire - General
- Topic: Inverting Vectric Clipart depth maps?
- Replies: 6
- Views: 400
Re: Inverting Vectric Clipart depth maps?
Please upload the file.
What is the image inverter, please use the actual name Vectric uses.
How did you create this shape? Is it multiple clip art images?
What is the image inverter, please use the actual name Vectric uses.
How did you create this shape? Is it multiple clip art images?
- Mon Feb 26, 2024 2:09 pm
- Forum: Design & Make Clipart- General
- Topic: clip art differences Aspire and VCarve?
- Replies: 5
- Views: 1299
Re: clip art differences Aspire and VCarve?
Thanks everyone, I will forward to my friend