Search found 14271 matches
- Tue Apr 16, 2024 9:06 pm
- Forum: Aspire - General
- Topic: Aspire Version 12 is OUT NOW 🎉
- Replies: 29
- Views: 1929
Re: Aspire Version 12 is OUT NOW 🎉
Ok I see what you mean now. You only mentioned pasting not copying. Using Ctrl-C is so ingrained that I did that and then used the other two methods for pasting. That way always works. It's not until you copy and paste both from the right click menu that it behaves that way.
- Tue Apr 16, 2024 8:18 pm
- Forum: Aspire - General
- Topic: Aspire Version 12 is OUT NOW 🎉
- Replies: 29
- Views: 1929
Re: Aspire Version 12 is OUT NOW 🎉
I found an issue with the Paste option when you right click on the screen then left click on Paste. When I do this, all the items I'm pasting go directly to the current layer. If I use the Ctrl V or go under the Edit in the Menu then click on Paste, all the items I am pasting go to the correct laye...
- Tue Apr 16, 2024 8:04 pm
- Forum: VCarve - General
- Topic: VCarve Version 12 is OUT NOW 🎉
- Replies: 23
- Views: 1290
Re: VCarve Version 12 is OUT NOW 🎉
That is with Aspire 12.004sircarveabit wrote: ↑Tue Apr 16, 2024 7:37 pmMight be an Aspire thing then. I will re-post this within the Aspire group. Thank you for your feed back.
- Tue Apr 16, 2024 5:52 pm
- Forum: VCarve - General
- Topic: VCarve Version 12 is OUT NOW 🎉
- Replies: 23
- Views: 1290
Re: VCarve Version 12 is OUT NOW 🎉
I'm not seeing that. All three options are behaving identically with 12.004. Even when pasting vectors copied from 11.5.
- Tue Apr 16, 2024 4:18 pm
- Forum: VCarve - General
- Topic: VCarve Version 12 is OUT NOW 🎉
- Replies: 23
- Views: 1290
Re: VCarve Version 12 is OUT NOW 🎉
Cut. Copy and Paste can be accessed by right clicking in the main windows and choosing from the menu or using Ctrl-C, Ctrl-X and Ctrl-V.
You can't add the icons for those back in.
You can't add the icons for those back in.
- Tue Apr 16, 2024 1:55 pm
- Forum: VCarve - General
- Topic: phantom hole punch
- Replies: 11
- Views: 246
Re: phantom hole punch
My apologies. I toggled the two layers when I screenshot the cutfile. Layer 0 is empty (as far as I can see). Layer 0 generates automatically for all files I import to v-carve. I am attaching the original dxf./.crv for clarity. Your input is greatly appreciated :D With that file and following Marks...
- Tue Apr 16, 2024 1:22 pm
- Forum: VCarve - General
- Topic: V12 Line Resolution
- Replies: 9
- Views: 246
- Tue Apr 16, 2024 8:47 am
- Forum: VCarve - General
- Topic: Grbl in trial version
- Replies: 14
- Views: 434
Re: Grbl in trial version
I would love to see the software interface with the actual machine someday. Until then, I'll be using Candle - or just dumping gcode directly to the machine's interface. VCarve comes with a program called vTransfer which I believe does what you want. I might be wrong though as I used a more "tradit...
- Mon Apr 15, 2024 8:48 pm
- Forum: VCarve - General
- Topic: Vcarve pro V11.5 and 12 not finishing
- Replies: 4
- Views: 175
Re: Vcarve pro V11.5 and 12 not finishing
60 to 70% through the roughing toolpath? Previews correctly in VCarve? Any messages on your controller software? Is the gcode file complete?
- Mon Apr 15, 2024 6:35 pm
- Forum: VCarve - General
- Topic: Saving Toolpaths
- Replies: 2
- Views: 81
Re: Saving Toolpaths
Yes you can. I do it all the time but it depends on which post processor you're using. It must support some form of tool change be it manually prompted or fully automatic.
- Mon Apr 15, 2024 6:34 pm
- Forum: Aspire - General
- Topic: Thomas the Train
- Replies: 9
- Views: 488
Re: Thomas the Train
There is a thread here - viewtopic.php?f=28&t=43132
- Mon Apr 15, 2024 3:58 pm
- Forum: VCarve - General
- Topic: V12.004 - drag and drop DXF doesn't work
- Replies: 4
- Views: 142
Re: V12.004 - drag and drop DXF doesn't work
I found with all versions that drag and drop can sometimes not work but closing and restarting VCarve fixes it. I'm sure it's a Windows issue rather than Vectric as I've had it with other programs as well.
Dragging and dropping DXF (and other files) is working fine for me in 12 as well.
Dragging and dropping DXF (and other files) is working fine for me in 12 as well.
- Mon Apr 15, 2024 3:24 pm
- Forum: VCarve - General
- Topic: phantom hole punch
- Replies: 11
- Views: 246
- Mon Apr 15, 2024 2:51 pm
- Forum: VCarve - General
- Topic: phantom hole punch
- Replies: 11
- Views: 246
Re: phantom hole punch
Hard to say 100% without seeing the actual file but it's most likely a very small vector. Zoom in on that area and/or go into node edit mode to make it a bit clearer. Assuming you're using a drill toolpath to make the holes. That works off the centre of the vector rather than the shape so a tiny str...
- Mon Apr 15, 2024 11:31 am
- Forum: Aspire - General
- Topic: v12 toolpath templates very slow.
- Replies: 6
- Views: 183
Re: v12 toolpath templates very slow.
Probably best to email support@vectric.com as it sounds like one of those issues that is particular to the combination of toolpaths etc rather than just being a general issue with toolpath templates.