Vectric Customer

I'm not seeing that. All three options are behaving identically with 12.004. Even when pasting vectors copied from 11.5.

Cut. Copy and Paste can be accessed by right clicking in the main windows and choosing from the menu or using Ctrl-C, Ctrl-X and Ctrl-V.

You can't add the icons for those back in.

My apologies. I toggled the two layers when I screenshot the cutfile. Layer 0 is empty (as far as I can see). Layer 0 generates automatically for all files I import to v-carve. I am attaching the original dxf./.crv for clarity. Your input is greatly appreciated :D With that file and following Marks...

saaismail wrote: ↑

Tue Apr 16, 2024 12:43 pm

My display is 1920 x 1080 as it was before for V11.5 - The image I presented was running both 11.5 and 12 on the same laptop showing how they display differently.

What about the scale though? V12 makes use of that whereas V11 doesn't.

I would love to see the software interface with the actual machine someday. Until then, I'll be using Candle - or just dumping gcode directly to the machine's interface. VCarve comes with a program called vTransfer which I believe does what you want. I might be wrong though as I used a more "tradit...

60 to 70% through the roughing toolpath? Previews correctly in VCarve? Any messages on your controller software? Is the gcode file complete?

Yes you can. I do it all the time but it depends on which post processor you're using. It must support some form of tool change be it manually prompted or fully automatic.

JDavis3rd wrote: ↑

Mon Apr 15, 2024 5:58 pm

I sure do not want to hijack this great thread. This is the only mention of AI generated models. Should a new topic be created?

There is a thread here - viewtopic.php?f=28&t=43132

I found with all versions that drag and drop can sometimes not work but closing and restarting VCarve fixes it. I'm sure it's a Windows issue rather than Vectric as I've had it with other programs as well.

Dragging and dropping DXF (and other files) is working fine for me in 12 as well.

neilgill wrote: ↑

Mon Apr 15, 2024 3:21 pm

Which Layer is it on? Your first shot shows Layer 1, the second shows "0".

Missed that. Much more likely to be the issue.

Hard to say 100% without seeing the actual file but it's most likely a very small vector. Zoom in on that area and/or go into node edit mode to make it a bit clearer. Assuming you're using a drill toolpath to make the holes. That works off the centre of the vector rather than the shape so a tiny str...

Probably best to email support@vectric.com as it sounds like one of those issues that is particular to the combination of toolpaths etc rather than just being a general issue with toolpath templates.

I'm not seeing that behaviour. I timed one of my usual 11 sheet jobs and it took pretty much the same time in both.

In that case there are no vectors as it's a component so you need the 3D roughing and finishing toolpaths rather than any of the vector based toolpaths.

Whether that is the most efficient/sensible way to cut it is hard to say without seeing it.

A 1mm (0.04") tip is pretty tiny :) Isn't the tool supposed to pull out of the wood in Z to get the detail required? Yes but you're using a start depth. It would be a sharp point if you didn't have the start depth but as far as the software is concerned there is no material above where you're cutti...