Search found 11962 matches

by Adrian
Mon Sep 20, 2021 9:23 pm
Forum: VCarve - General
Topic: Transferring really old designs to V11
Replies: 2
Views: 63

Re: Transferring really old designs to V11

You can export/import toolpaths as templates via the relevant icons on the toolpath tab if you need to.
by Adrian
Mon Sep 20, 2021 7:25 pm
Forum: VCarve - General
Topic: Chamfer toolpath tutorial
Replies: 1
Views: 38

Re: Chamfer toolpath tutorial

It's playing fine for me. Which browser are you using?
by Adrian
Mon Sep 20, 2021 4:04 pm
Forum: VCarve - General
Topic: Nesting
Replies: 2
Views: 52

Re: Nesting

From memory it's been in every version of VCarve since around V4/V5 and with Cut2D it was the first unified release which would have been 8 I believe.
by Adrian
Mon Sep 20, 2021 3:55 pm
Forum: Aspire - General
Topic: Why no 3d tabs check box sometimes?
Replies: 8
Views: 169

Re: Why no 3d tabs check box sometimes?

It works on a per toolpath basis so it can be on for one toolpath and off for the other in the same job.
by Adrian
Mon Sep 20, 2021 10:04 am
Forum: VCarve - General
Topic: Drawings resized?
Replies: 3
Views: 94

Re: Drawings resized?

Need more information really. What do you mean by loaded up? Did you import a file from (DXF, EPS, etc) another application? Was it a file that you created and saved from VCarve and it resized when you re-opened it? I'll guess that you're importing/opening a DXF file. The most likely answer is that ...
by Adrian
Mon Sep 20, 2021 8:37 am
Forum: Aspire - General
Topic: Creating a component that the modeling tool will accept
Replies: 6
Views: 191

Re: Creating a component that the modeling tool will accept

With the join tool the issue is most likely the tolerance value. With the other join tools if you're getting results that seem odd then it's most likely that you need to move the start node on one of the vectors if it's not joining where you expect it to. Why is the vector made up of so many open ve...
by Adrian
Sun Sep 19, 2021 4:59 pm
Forum: Aspire - General
Topic: Creating a component that the modeling tool will accept
Replies: 6
Views: 191

Re: Creating a component that the modeling tool will accept

He won't be able to share the file as it's the trial edition. Files created with that will only open on the computer they were created on.

Not sure what is going on as you seem to be saying that you can't select the vector at all. You haven't locked the layer you put it on have you?
by Adrian
Sun Sep 19, 2021 11:26 am
Forum: VCarve - General
Topic: VCarve Desktop & Pro Version 11 are OUT NOW
Replies: 27
Views: 3046

Re: VCarve Desktop & Pro Version 11 are OUT NOW

zac wrote:
Sun Sep 19, 2021 1:35 am
hi i am having trouble loading my updated V11 to my computer. it is an older model running windows vista. the problem is i am unable to load / open the V&co page
Wayne.
What error are you seeing when you're trying? What browser are you using and what version of it ?
by Adrian
Sat Sep 18, 2021 5:40 pm
Forum: VCarve - General
Topic: UGM 2021 Project Files
Replies: 4
Views: 135

Re: UGM 2021 Project Files

by Adrian
Sat Sep 18, 2021 9:14 am
Forum: Aspire - General
Topic: Aspire Tutorials... Just where are they?
Replies: 4
Views: 128

Re: Aspire Tutorials... Just where are they?

You can access the tutorials directly from the Help (Video Tutorial Browser) in Aspire. As Vic says there is an install and download button below each video. The install button will automatically launch and install the videos whereas the download will download the installer file so it can be copied ...
by Adrian
Fri Sep 17, 2021 9:00 pm
Forum: VCarve - Tips and Tricks
Topic: I must be missing a setting in this Inlay process
Replies: 9
Views: 378

Re: I must be missing a setting in this Inlay process

Would doing a separate toolpath with my settings at 0.0 and a flat depth of 0.18 work? Then I'd have the second toolpath set at 0.18 to 0.2 to make my original cut? Use the gadget referred to earlier in the thread or if you want to do it manually read this - https://forum.vectric.com/viewtopic.php?...
by Adrian
Fri Sep 17, 2021 8:12 pm
Forum: Aspire - Tips and Tricks
Topic: Can you control the toolpath route?
Replies: 1
Views: 138

Re: Can you control the toolpath route?

It depends on how the post processor is written but in general the job will start with the machine moving to the Home XY position as defined in Material Setup on the toolpath tab. It will move to the Z position dictated to by the Z Gap above Material setting at the same time. From there it will move...
by Adrian
Fri Sep 17, 2021 9:05 am
Forum: Cut2D - General
Topic: Cutting area for Cut2D Desktop?
Replies: 2
Views: 156

Re: Cutting area for Cut2D Desktop?

Cut2D Desktop has a 24" x 24" limit but it won't let you generate toolpaths that exceed that limit so that's not your problem.

Have you cut with the machine before? Has it been calibrated?
by Adrian
Fri Sep 17, 2021 9:01 am
Forum: VCarve - General
Topic: Using Nesting option with multiple toolpaths
Replies: 6
Views: 186

Re: Using Nesting option with multiple toolpaths

You're doing something wrong but I don't know what from your description other than you're not selecting the vectors properly when moving them to layers.

Have a look at the attached example file and see if that makes things clearer for you.
by Adrian
Thu Sep 16, 2021 7:06 pm
Forum: VCarve - General
Topic: Using Nesting option with multiple toolpaths
Replies: 6
Views: 186

Re: Using Nesting option with multiple toolpaths

You delete sheets from the Sheets tab.