Search found 7 matches

by garv123
Sat Feb 15, 2020 1:45 pm
Forum: Cut2D - General
Topic: Biesse rover A post processor
Replies: 5
Views: 513

Re: Biesse rover A post processor

After talking to the guys installing the machine, the 2008 machine isnt the same as the newer models, they changed to a new model and didnt make the rover anymore, then made another machine and rebranded it with the old rover model name. Who makes post processors ? are there people working for vectr...
by garv123
Thu Feb 13, 2020 2:41 pm
Forum: Cut2D - General
Topic: Biesse rover A post processor
Replies: 5
Views: 513

Re: Biesse rover A post processor

I was just told by the lads installing the machine that the ones we have for vectric are for an older version machine.
by garv123
Thu Feb 13, 2020 12:46 pm
Forum: Cut2D - General
Topic: Biesse rover A post processor
Replies: 5
Views: 513

Biesse rover A post processor

Hi, we've a new biesse rover A machine at work, it has its own cad cam software but we're also looking to use Vectric.
The one provided in the post processor folder is too old, last modified in 2007.

Is it possible to download a new one?
by garv123
Mon Nov 11, 2019 12:14 pm
Forum: Cut2D - General
Topic: Pocket from inside out
Replies: 6
Views: 1230

Re: Pocket from inside out

I expect it's generating the toolpath like that as it's so close to being double the diameter of the bit the toolpath would be cutting air for the most part if it started in the middle. Close. It's because the tool step-over is 60.2% (12mm) of the bit diameter (which is specified as 19.5mm not 20)....
by garv123
Fri Nov 08, 2019 1:05 pm
Forum: Cut2D - General
Topic: Pocket from inside out
Replies: 6
Views: 1230

Re: Pocket from inside out

Sample of a job attached
by garv123
Fri Nov 08, 2019 12:52 pm
Forum: Cut2D - General
Topic: Shelf Supports
Replies: 10
Views: 1055

Re: Shelf Supports

Be sure the vectors are all in the correct layer and that "Associate with toolpath" is ticked in the vector selector for each toolpath.
by garv123
Wed Nov 06, 2019 11:18 am
Forum: Cut2D - General
Topic: Pocket from inside out
Replies: 6
Views: 1230

Pocket from inside out

Hi all, As above, is there any way to set the start point of a pocket on the inside when using offset. I cant see any option for it. It was our default when using Artcam. Using cut 2d pro now. Basically when pocketing out plastic, a 40.4mm long pocket with a 20mm cutter, the cutter will run around t...