Steve,
I also thank you for you excellent file
It is so good that there are people in the forum that can and are willing to assist.
Regards
Barrie
Search found 18 matches
- Wed Jan 26, 2022 3:15 am
- Forum: Aspire - Tips and Tricks
- Topic: Drawing and machining a curved slot
- Replies: 4
- Views: 4206
- Wed Jan 26, 2022 3:13 am
- Forum: Aspire - Tips and Tricks
- Topic: Drawing and machining a curved slot
- Replies: 4
- Views: 4206
Re: Drawing and machining a curved slot
Adze
My thanks to you for your very much appreciated file.
It looks like it will work very well.
Regards
Barrie
My thanks to you for your very much appreciated file.
It looks like it will work very well.
Regards
Barrie
- Tue Jan 25, 2022 8:07 am
- Forum: Aspire - Tips and Tricks
- Topic: Drawing and machining a curved slot
- Replies: 4
- Views: 4206
Drawing and machining a curved slot
Good afternoon. I am making a clock to sit in a 400mm long x 40 mm thick a 50mm wide base The clock is 400mm in diameter. I wish to have it sit in the base by 12mm, How do I draw the slot for the clock to sit in to follow the 400mm curve and then machine the curved slot, as per my drawing. Aspire Dr...
- Fri Dec 24, 2021 9:22 am
- Forum: Aspire - Tips and Tricks
- Topic: Cutting detailed inlay
- Replies: 10
- Views: 11157
Re: Cutting detailed inlay
Ron Thank you Sooooooo Much. A great Christmas Gift. May this Christmas be the brightest, most beautiful Christmas of your life. May the closeness of your loved ones, family, and friends fill your heart with joy. And you find all the peace and joy you’ve been looking for !! Have a Blessed, Happy and...
- Thu Dec 23, 2021 8:20 am
- Forum: Aspire - Tips and Tricks
- Topic: Cutting detailed inlay
- Replies: 10
- Views: 11157
Re: Cutting detailed inlay
Thank You so much
Have a very happy and safe Christmas
Barrie
Have a very happy and safe Christmas
Barrie
- Thu Dec 23, 2021 7:32 am
- Forum: Aspire - Tips and Tricks
- Topic: Cutting detailed inlay
- Replies: 10
- Views: 11157
Re: Cutting detailed inlay
Ron, Thank You. I have ordered a couple of these bits from Precise but I am not expecting them in till January sometime. I am happy to take up your offer as well and I can return a new one when it arrives. Can you please send me your email address in the parcel in order to sort it out. Thanks My Add...
- Sat Dec 18, 2021 9:33 am
- Forum: Aspire - Tips and Tricks
- Topic: Cutting detailed inlay
- Replies: 10
- Views: 11157
Re: Cutting detailed inlay
To FixitMike Thank you for your very quick and helpful reply. I have in my tool cupboard a, Timberline 180-22 Carbide Tipped V Groove Signmaking & Lettering 60 Deg x 9/16 D x 7/16 CH x 1/4 Inch SHK Router Bit from Tools Today, USA. I could not buy any thing like this in Australia. Being in Western A...
- Sat Dec 18, 2021 7:10 am
- Forum: Aspire - Tips and Tricks
- Topic: Cutting detailed inlay
- Replies: 10
- Views: 11157
Cutting detailed inlay
I am doing an end grain inlay.
I have been asked to make it in walnut main base and rock maple for the inlay.
The inlay will be a very detailed crest.
Can you please advise the best Ange router v-bit to use.
Thanking for all the help.
Barrie
I have been asked to make it in walnut main base and rock maple for the inlay.
The inlay will be a very detailed crest.
Can you please advise the best Ange router v-bit to use.
Thanking for all the help.
Barrie
- Thu Oct 21, 2021 6:59 am
- Forum: Aspire - Gallery
- Topic: Clock
- Replies: 5
- Views: 3868
Clock
Clock that I made as a gift in Western Australian Jarrah
- Thu Oct 21, 2021 6:53 am
- Forum: Aspire - Tips and Tricks
- Topic: Adding Form Tool
- Replies: 1
- Views: 3706
Adding Form Tool
Can someone please assist me with adding the attached Form Tool to me Aspire 11 Tool Data Base
Thank You Barrie
Thank You Barrie
- Sat Mar 20, 2021 1:15 am
- Forum: Aspire - Gallery
- Topic: Curved Sides flat Bottom large dish
- Replies: 1
- Views: 1655
Curved Sides flat Bottom large dish
Just completed in French Oak and Osmo Oil for the finish
- Sat Mar 20, 2021 1:12 am
- Forum: Aspire - Tips and Tricks
- Topic: Curved Sides flat Bottom large dish
- Replies: 7
- Views: 4050
Re: Curved Sides flat Bottom large dish
Well, with a lot of help and great info from the Vectric users I have finally completed the Curved Sides flat Bottom large dish It finished 1030mm long, 230mm wide, 75mm high Made from a single piece of French Oak an I used Osmo Oil for the Finish. It was cut out with one router bit 120mm long, 12mm...
- Sun Jan 03, 2021 2:33 am
- Forum: Aspire - Tips and Tricks
- Topic: Curved Sides flat Bottom large dish
- Replies: 7
- Views: 4050
Re: Curved Sides flat Bottom large dish
I do modelling outside of VCarve (in my case) so I can’t really help there. If you do model this in 3D you could get by with 3 toolpaths: pocket toolpath using the inner oval to get the 60mm deep flat area 3D roughing toolpath between the two ovals 3D finishing toolpath between the two ovals (if I ...
- Sat Jan 02, 2021 8:28 am
- Forum: Aspire - Tips and Tricks
- Topic: Curved Sides flat Bottom large dish
- Replies: 7
- Views: 4050
Curved Sides flat Bottom large dish
Good afternoon Is anyone able to assist with the program for cutting out a 1000 mm Long x 200 mm wide x 75 mm oval dish' The requirement is to have a flat inside bottom 15mm thick Curved sides down 60 mm, to the flat inside base. See drawing attached Cut out Board 02 01 2021.pdf This the first one o...
- Mon Oct 19, 2020 12:26 am
- Forum: Post Processors
- Topic: UCCNC Post Processor for Wrapping
- Replies: 5
- Views: 15392
Re: UCCNC Post Processor for Wrapping
Thank You,
I appreciate your help.
Barrie123
I appreciate your help.
Barrie123