in material setup/ you should find what you need.
possibly you can delete 3d image and reload it, just a thought
Search found 36 matches
- Sat May 07, 2022 9:20 pm
- Forum: VCarve - General
- Topic: weird preview
- Replies: 5
- Views: 1195
- Sat May 07, 2022 12:35 am
- Forum: VCarve - General
- Topic: weird preview
- Replies: 5
- Views: 1195
- Fri May 06, 2022 10:10 pm
- Forum: VCarve - General
- Topic: weird preview
- Replies: 5
- Views: 1195
Re: weird preview
Goto molding tab, finish setup
- Thu May 05, 2022 2:01 am
- Forum: VCarve - General
- Topic: Engraving help
- Replies: 79
- Views: 10982
Re: Engraving help
Trucker,
Quick engrave is designed for a diamond drag tool to etched in metal, glass and other hard surface. try using the tile with the "V" on it.
I make business cards using quick engrave metal with diamond drag.
Quick engrave is designed for a diamond drag tool to etched in metal, glass and other hard surface. try using the tile with the "V" on it.
I make business cards using quick engrave metal with diamond drag.
- Tue May 03, 2022 8:56 pm
- Forum: VCarve - General
- Topic: Engraving help
- Replies: 79
- Views: 10982
Re: Engraving help
Your tool screen shot show a "side angle" of 60 degrees. Remember that v-bits (those that come to a point) are entered using the fully included angle of the bit and that engraving bits (those with flats) are entered using one half of the fully included angle—i.e. the "side angle". But also remember...
- Tue May 03, 2022 3:49 am
- Forum: VCarve - General
- Topic: Completely Discourages
- Replies: 18
- Views: 2998
Re: Completely Discourages
Hi Mark,
try this? I cleaned up the extra vectors
might need adjust feeds and speeds
try this? I cleaned up the extra vectors
might need adjust feeds and speeds
- Sun May 01, 2022 6:38 pm
- Forum: VCarve - General
- Topic: V Grove Fold joint
- Replies: 20
- Views: 5656
Re: V Grove Fold joint
Howdy All,
Martin is correct the best way is the Miter Fold Dado Set Plus. But that's about 350.00 us dollars
but it can be done on a well-tuned CNC, I do it all the time.
Martin is correct the best way is the Miter Fold Dado Set Plus. But that's about 350.00 us dollars
but it can be done on a well-tuned CNC, I do it all the time.
- Fri Apr 29, 2022 10:59 pm
- Forum: VCarve - General
- Topic: Generating Reports
- Replies: 5
- Views: 1100
Re: Generaating Reports
if your using windows, us the snipping feature
https://support.microsoft.com/en-us/win ... 299b865f6b
https://support.microsoft.com/en-us/win ... 299b865f6b
- Wed Apr 27, 2022 10:05 pm
- Forum: VCarve - General
- Topic: Looks a little burnt
- Replies: 9
- Views: 1516
Re: Looks a little burnt
Howdy custom,
If your running 40 IPM your spindle speed should somewhere around 8 thousand to 12 thousand with a sweet spot at ten thousand.
In all years and experience I never used manufacture spec. only used them as a reference.
keep in cherry will burn if hand sand it to hard
If your running 40 IPM your spindle speed should somewhere around 8 thousand to 12 thousand with a sweet spot at ten thousand.
In all years and experience I never used manufacture spec. only used them as a reference.
keep in cherry will burn if hand sand it to hard
- Tue Apr 26, 2022 1:42 am
- Forum: VCarve - General
- Topic: Vcarve Inlays and Vbit angle
- Replies: 17
- Views: 6418
Re: Vcarve Inlays and Vbit angle
90 degrees is a shallow inlay 60 degrees is a little deeper inlay a tapered inlay is even deeper depending on the details.
- Mon Apr 25, 2022 1:08 am
- Forum: VCarve - General
- Topic: 3d STL FILE
- Replies: 3
- Views: 1001
Re: 3d STL FILE
Gary,
Yes, Vcarve is. you edit in the molding tab along with editing on the drawing tab as you mention
Yes, Vcarve is. you edit in the molding tab along with editing on the drawing tab as you mention
- Mon Apr 25, 2022 12:59 am
- Forum: VCarve - General
- Topic: Problems after Vcarve pro 11 upgrade
- Replies: 28
- Views: 5393
Re: Problems after Vcarve pro 11 upgrade
you might have other issue with ram usage? mach4 doesn't need much. PREFERRED: 32 or 64-bit Laptop or Desktop – Using an External Motion Controller Windows 10, Windows 8, Windows 7, Windows XP* An appropriate external motion controller Mach4 Plugin for the selected Motion Controller 2Ghz CPU 1GB RAM...
- Mon Apr 25, 2022 12:22 am
- Forum: VCarve - General
- Topic: Vcarve Inlays and Vbit angle
- Replies: 17
- Views: 6418
Re: Vcarve Inlays and Vbit angle
using a tapered cutter would requires minimum 1 1/2" thick material if not more
- Mon Apr 25, 2022 12:02 am
- Forum: VCarve - General
- Topic: Assigning tab locations to be recognized by Vcarve
- Replies: 6
- Views: 1257
Re: Assigning tab locations to be recognized by Vcarve
Tabs are part of toolpath and place in your choice of position or automatic.
- Sun Apr 24, 2022 11:14 pm
- Forum: VCarve - General
- Topic: Another "inlay won't quite fit" thread - engraving bit
- Replies: 36
- Views: 8942
Re: Another "inlay won't quite fit" thread - engraving bit
it's to make the plug taller and create a glue gap.
if looking for detail, this might help
if looking for detail, this might help