Search found 7 matches
- Mon Sep 02, 2019 12:11 am
- Forum: VCarve - General
- Topic: Pocket Tool Path problem in Vcarve Pro 9.518
- Replies: 15
- Views: 4469
Re: Pocket Tool Path problem in Vcarve Pro 9.518
Make two Changes 1.) Change the toolpath order (Why are you changing the order after it is created? Just curious as to why you are changing it!) 2.) Change the stepover of the 1.5 dia bit to 50% to 75% And I think this may solve your problem. Sharkcutup Hello again, I have been changing the tool pa...
- Sun Sep 01, 2019 1:10 am
- Forum: VCarve - General
- Topic: Pocket Tool Path problem in Vcarve Pro 9.518
- Replies: 15
- Views: 4469
Re: Pocket Tool Path problem in Vcarve Pro 9.518
What you could do is create something that also shows the issues you are having. Let's face it, pockets are not all that "proprietary". In other words, draw a similar pocket, put it in a rectangle and away you go. That way you will get all sorts of help around here. Hi again, Never thought to creat...
- Sat Aug 31, 2019 8:12 pm
- Forum: VCarve - General
- Topic: Pocket Tool Path problem in Vcarve Pro 9.518
- Replies: 15
- Views: 4469
Re: Pocket Tool Path problem in Vcarve Pro 9.518
Hi Adrian,
Sorry, but I can not provide the actual Vcarve pro file in a public forum as it is my customers proprietary design.
I could provide it privately with guarantees that it will not be saved or shared, however.
Brian
Sorry, but I can not provide the actual Vcarve pro file in a public forum as it is my customers proprietary design.
I could provide it privately with guarantees that it will not be saved or shared, however.
Brian
- Sat Aug 31, 2019 8:06 pm
- Forum: VCarve - General
- Topic: Pocket Tool Path problem in Vcarve Pro 9.518
- Replies: 15
- Views: 4469
Re: Pocket Tool Path problem in Vcarve Pro 9.518
Hello Adrian,
Which file should I attach? I did attach the file showing the weird cut that is being added at the end of the 1/4" tool cut. Did you want the Toolpath file?
Thanks
Brian
Which file should I attach? I did attach the file showing the weird cut that is being added at the end of the 1/4" tool cut. Did you want the Toolpath file?
Thanks
Brian
- Sat Aug 31, 2019 7:40 pm
- Forum: VCarve - General
- Topic: Pocket Tool Path problem in Vcarve Pro 9.518
- Replies: 15
- Views: 4469
Pocket Tool Path problem in Vcarve Pro 9.518
Hello Folks, Haven't run the pocket tool path since prior to the 9.517 upgrade and the tool path ran good on this project. What is now happening when I compile the toolpath and run it on my CanCam D23Minitron, the 1/4 inch end mill does a complete first pass at the .125" depth then lifts the tool, g...
- Wed Apr 24, 2019 6:45 pm
- Forum: VCarve - General
- Topic: Dividing A Circle
- Replies: 9
- Views: 4540
Re: Dividing A Circle
Hello all, Thank you to those who have replied to this post. I am not the OP and am a beginner with Vectric myself. I have been using Vcarve pro since January and had been attempting to similarly divide a circle into equally sized arcs. The solution posted here is so simple and much more accurate th...
- Wed Apr 24, 2019 6:00 pm
- Forum: Cut2D - General
- Topic: The New Map Thread - Show us where you are in the world
- Replies: 1424
- Views: 4361103
Re: The New Map Thread - Show us where you are in the world
Sooke, British Columbia, V9Z 0G2