Vectric Customer

For the talented DIY guys here is an idea for scanning parts and bringing coordinates into the pc:

http://www.caliper2pc.de/en_index.html

Richard

Hi Luke,

please have a look here : http://forum.vectric.com/viewtopic.php? ... 225#p99225

Richard

Hi dermot,

perhaps you should use german and english in the same post so everyone would be able to understand ?

Vielleich solltest Du Deutsch und Englisch im selben Post benutzen damit jeder durchblickt worum es geht ?

Richard

Leo, this will work nowadays where the control software runs from a pc with lot of memory. My example is from a older Fanuc control with pretty less memory . So we have to write compact programs. Your solution creates large programs especially if you have more than one offset to use. But it works an...

If your control(software) supports supports Sub Program calls you could use the following program structure : O4712 (THE MAIN PROGRAM CONTROLLING THE OFFSETS9 G90G54(USE 1ST WORK OFFSET) (CALL TOOLPATH SUB PROGRAM) P4711M98 G55 (USE 2ND WORK OFFSET) (CALL TOOLPATH SUB PROGRAM) P4711M98 M2 % :4711 (T...

Clicking in VCP 8.5 on Open Application Data Folder it comes up with C:\ProgramData\Vectric\VCarve Pro\V8.5 but some gadgets install in C:\Users\Public\Documents\Vectric Files. Copying the gadgets from C:\Users\Public\Documents\Vectric Files to C:\ProgramData\Vectric\VCarve Pro\V8.5 makes it work . ...

If it is a font without copyright you might send it to me and I would edit it ?!

Richard

If you look pretty close in node edit mode you can see two loops. You have to move nodes to not overlap the vectors.

Richard

Select a vector , press 'N' on the keyboard and you see a green square showing the start point of this vector. Now select the black square at the other end and press 'P' on the keyboard to set the start point here. Now try the gadget again. The gadget uses the start point where to define 'left' or '...

Take a google search for Netfabb Basic. It's free and it can cut in 3 axis

Richard

Here is a link for inspirations :

http://etc.usf.edu/clipart/galleries/45 ... structions

Richard

If you choose the V3M version of the files from VectorArt3D you can import as many of those as you like into VCarve. The restriction only applies to non-Vectric format files.

GREAT!

Thanks Adrian

Richard

Thanks Rod for pointing me to Vectorart3d.

But since only Aspire can work with multiple stl files I'll have to wait

Richard

Looks like I have to feed my piggybank with much more food!

Thanks anyway for your answer !

Richard

I'd need to modify the banner in the clipart/Ribbons(Banner) section coming with VCP8. Both ends should point upwards to better fit in a circle. You can see what I mean in the screenshot : the ends in the green circles should look like the ends in the red circles without changes the remaining part. ...