Search found 14 matches

by Steve Sawtelle
Mon Apr 01, 2019 3:23 am
Forum: Design & Make Clipart- General
Topic: How to re-size D+M Dbl Gothic Panel w/o losing perspective
Replies: 9
Views: 1534

Re: How to re-size D+M Dbl Gothic Panel w/o losing perspecti

Thank you very much. You are absolutely correct. I will start setting time aside each week to work through a couple until I get closer to amateur status! Thanks for your help. I will try not to pester the forum with things I should be able to noodle out. Thanks!
by Steve Sawtelle
Mon Apr 01, 2019 3:00 am
Forum: Design & Make Clipart- General
Topic: How to re-size D+M Dbl Gothic Panel w/o losing perspective
Replies: 9
Views: 1534

Re: How to re-size D+M Dbl Gothic Panel w/o losing perspecti

Ok, I am wicked close, but I cannot find the "Combine mode to merge" button. I think I might be offset by about a 1/16 of an inch, once I find that button will it line them up or do I have to go into settings somewhere so I can nudge it in smaller increments?
by Steve Sawtelle
Mon Apr 01, 2019 2:27 am
Forum: Design & Make Clipart- General
Topic: How to re-size D+M Dbl Gothic Panel w/o losing perspective
Replies: 9
Views: 1534

Re: How to re-size D+M Dbl Gothic Panel w/o losing perspecti

PS. I wish there were classes just for the aspire software. Maybe when I make it through all of the tutorials things will come much more easily.
by Steve Sawtelle
Mon Apr 01, 2019 2:24 am
Forum: Design & Make Clipart- General
Topic: How to re-size D+M Dbl Gothic Panel w/o losing perspective
Replies: 9
Views: 1534

Re: How to re-size D+M Dbl Gothic Panel w/o losing perspecti

Wow! You nailed it! That is exactly what I am after, but I have never used any of those tools, so I am tied up until Tuesday night but I will work on it again at that point. That is what I was trying to do but I couldn't find the tutorial that shows me how to cut stuff off. I think I can use the pol...
by Steve Sawtelle
Mon Apr 01, 2019 12:32 am
Forum: Design & Make Clipart- General
Topic: How to re-size D+M Dbl Gothic Panel w/o losing perspective
Replies: 9
Views: 1534

Re: How to re-size D+M Dbl Gothic Panel w/o losing perspecti

Sorry, I have the latest edition of Aspire. Thanks,
by Steve Sawtelle
Sun Mar 31, 2019 11:52 pm
Forum: Design & Make Clipart- General
Topic: How to re-size D+M Dbl Gothic Panel w/o losing perspective
Replies: 9
Views: 1534

How to re-size D+M Dbl Gothic Panel w/o losing perspective

I am sorry if I am in the wrong place but my question is this: I have purchased the Design and Make Double Gothic Panel 50481.A design. I would like to have the final design fit a panel equal to 18 inches wide by 28.5 inches high When I re-size to this measurement it causes the Trefoils to change sh...
by Steve Sawtelle
Thu Feb 07, 2019 8:33 pm
Forum: Aspire - General
Topic: Design and Make Question
Replies: 3
Views: 782

Re: Design and Make Question

I have worked through some of the tutorials, probably just too excited and getting ahead of myself. I have aspire software current version.
by Steve Sawtelle
Thu Feb 07, 2019 2:59 pm
Forum: Aspire - General
Topic: Design and Make Question
Replies: 3
Views: 782

Design and Make Question

I am sorry if I have posted this in the wrong location, I have a question about a design and make download Model 50154. Can I remove the "banners" on the top and bottom section of the model? I am wondering if I can move things around or remove them? I wanted to remove the "F" and the "D" and change ...
by Steve Sawtelle
Sat Nov 10, 2018 10:01 pm
Forum: Aspire - General
Topic: Help with Moulding Arches
Replies: 4
Views: 1205

Re: Help with Moulding Arches

Great tip. I’ve watched it a couple of times but I am still hung up with some open vectors. I have cut and trimmed all tips and stray things that I can see, but I still have pesky vectors that I cannot join. Back to the drawing board. It’s a simple repeating pattern so it’s rather frustrating. Never...
by Steve Sawtelle
Sat Nov 10, 2018 7:12 pm
Forum: Aspire - General
Topic: Help with Moulding Arches
Replies: 4
Views: 1205

Re: Help with Moulding Arches

I think I will abandon the moulding toolpath attempt and try the simple geometry with pocket toolpaths which I believe will be a bit easier. This way I think I can draw up the entire design and have it cut on the lines then finish with a profile toolpath to complete the cut out parts. (maybe)
by Steve Sawtelle
Sat Nov 10, 2018 12:10 am
Forum: Aspire - General
Topic: Help with Moulding Arches
Replies: 4
Views: 1205

Help with Moulding Arches

Sorry, Newbie here: I am trying to mold arches. It would look like something you might see in a church window. It would be a series of offset stacked arches with a profile of 3/4w x 3/4 high with 1/4round scallops in the top edges. (the pic shows sharp pointed tops) I think I have to plan the center...
by Steve Sawtelle
Mon Jul 16, 2018 5:54 pm
Forum: Hardware related questions
Topic: recommendation on aspire 3D router bits
Replies: 3
Views: 1305

Re: recommendation on aspire 3D router bits

Thank you guys, that should get me started.
by Steve Sawtelle
Mon Jul 16, 2018 12:48 pm
Forum: Hardware related questions
Topic: recommendation on aspire 3D router bits
Replies: 3
Views: 1305

recommendation on aspire 3D router bits

Brand new here, forgive me if this has been covered a million times: Starting out! Can someone recommend a list of starter bits. I am using a router in a Camaster Stinger 1, running Aspire software. At this stage I really don't know what I don't know. My goal is to begin to cover all of the tutorial...