Thanks all!
Anyways, the picture shares the satisfactory results.
Michael
Figured it out! I was focused on the picture icon before. "Attachments", Oh well, eh!Search found 44 matches
- Wed Aug 16, 2023 4:07 am
- Forum: VCarve - General
- Topic: 8 Open Vector Issue
- Replies: 5
- Views: 692
- Wed Aug 16, 2023 1:27 am
- Forum: VCarve - General
- Topic: 8 Open Vector Issue
- Replies: 5
- Views: 692
Re: 8 Open Vector Issue
All in All, I'm very pleased with the results today! Sorry, but I have no idea how to attach an image to this post, sharing my outcome.
- Wed Aug 16, 2023 1:11 am
- Forum: VCarve - General
- Topic: 8 Open Vector Issue
- Replies: 5
- Views: 692
Re: 8 Open Vector Issue
Thanks for your quick response. In fact I was going to use a VCarve with a flat depth of 0.075", just to scratch the lacing into the wood.
My problem is how to make the changes you suggest. I have no idea. I do hope you can shine a bit of light in my direction to solve this issue.
Thanks
My problem is how to make the changes you suggest. I have no idea. I do hope you can shine a bit of light in my direction to solve this issue.
Thanks
- Tue Aug 15, 2023 11:52 pm
- Forum: VCarve - General
- Topic: 8 Open Vector Issue
- Replies: 5
- Views: 692
8 Open Vector Issue
I'm trying to make a simple lacing on a football. 1 curved line, 7 cross lines to make up my laces. When I try to calculate a path for this simple situation, I get a report error stating that I have 8 Open Vectors. I go to Join Vectors, and it too shares that 8 are open. Unfortunately, the Join comm...
- Fri May 06, 2022 10:13 pm
- Forum: Aspire - Tips and Tricks
- Topic: Help Required w/ Centering Multiple Duplicated Hexagons
- Replies: 14
- Views: 3872
Re: Help Required w/ Centering Multiple Duplicated Hexagons
Another (much easier) method: Rotate the hex 30 degrees. Array copy, one row, many columns, with a .10 gap. Rotate the entire array back 30 degrees. Array copy, one column, many rows, Y Offset 1.10". Delete unwanted hexes. Wonderful ideas here Mike! I will play around with your ideas for sure! BTW,...
- Fri May 06, 2022 7:30 pm
- Forum: Aspire - Tips and Tricks
- Topic: Help Required w/ Centering Multiple Duplicated Hexagons
- Replies: 14
- Views: 3872
Re: Help Required w/ Centering Multiple Duplicated Hexagons
LOL...
I just deleted 95% of duplicated hexagons sitting (hiding) on top of one another! (Learning Curve!) that are hiding in that CRV3D file!
I just deleted 95% of duplicated hexagons sitting (hiding) on top of one another! (Learning Curve!) that are hiding in that CRV3D file!
- Fri May 06, 2022 7:04 pm
- Forum: Aspire - Tips and Tricks
- Topic: Help Required w/ Centering Multiple Duplicated Hexagons
- Replies: 14
- Views: 3872
Re: Help Required w/ Centering Multiple Duplicated Hexagons
What I did to get the .9310 dimension.: ... Thanks Mike for your personal tutorial! I did get lost after 5 or 6, but that is OK! I was able to fight my way through getting the exact pattern I was aiming for, and with my Wife's request of 0.1" between every hexagon! And when push comes to shove, wel...
- Fri May 06, 2022 4:30 pm
- Forum: Aspire - Tips and Tricks
- Topic: Help Required w/ Centering Multiple Duplicated Hexagons
- Replies: 14
- Views: 3872
Re: Help Required w/ Centering Multiple Duplicated Hexagons
The Help-Help Contents explains a lot about how each tool and toolpath works. Mike, I am caught off guard here. My wife asked me to change the distance between each hex to 0.1". I sure am missing something understanding setting the distance between each hex. The patterns that are a result of my twe...
- Fri May 06, 2022 4:57 am
- Forum: Aspire - Tips and Tricks
- Topic: Help Required w/ Centering Multiple Duplicated Hexagons
- Replies: 14
- Views: 3872
Re: Help Required w/ Centering Multiple Duplicated Hexagons
A 1" hexagon has a side length of .57737" The vertical distance center to center with a .075" spacing is 1.075". Adjacent columns are offset in Y (1.075")/2=.5375" Adjacent columns are offset in X .9310" With this information, you should be able to array the hexagons.Hexagons.crv Wow! What wonderfu...
- Fri May 06, 2022 4:51 am
- Forum: Aspire - Tips and Tricks
- Topic: Help Required w/ Centering Multiple Duplicated Hexagons
- Replies: 14
- Views: 3872
Re: Help Required w/ Centering Multiple Duplicated Hexagons
Did you use the Array Copy tool?It's on the Drawing tab, under Offset and Layout. Allan Thank you kindly Allan. No, I have never had any use for that tool, and I was thinking in the back of my head that Array had something to do with this. I'll see if I can find a tutorial on how to use the Array T...
- Fri May 06, 2022 1:31 am
- Forum: Aspire - Tips and Tricks
- Topic: Help Required w/ Centering Multiple Duplicated Hexagons
- Replies: 14
- Views: 3872
Help Required w/ Centering Multiple Duplicated Hexagons
I am using Aspire 11.010 Image55.jpg . I am trying to create a board with many Hexagons within. See Attached image. Right now I have about 16 x 21 rows of 1" hexagons on my project (Size of project = 16 x 11 x 1.25in). What my issue is, is the hexagons are nicely placed in the project piece, BUT it ...
- Sat Sep 18, 2021 5:20 am
- Forum: Aspire - General
- Topic: Aspire Tutorials... Just where are they?
- Replies: 4
- Views: 1761
Re: Aspire Tutorials... Just where are they?
Thanks for this info, Vic! Wonderful assistance!
Michael
Michael
- Sat Sep 18, 2021 4:57 am
- Forum: Aspire - General
- Topic: Aspire Tutorials... Just where are they?
- Replies: 4
- Views: 1761
Aspire Tutorials... Just where are they?
Hi all! I was just wondering where the tutorial files are located? Well, I know that they should be within the Clipart, (I do see the folder, but it is just empty!) but all I'm locating are JPG images for the tutorials, and not the 3DCRV, or any TXT files. Any ideas would be grand! Do I have to figu...
- Thu Sep 06, 2018 6:44 am
- Forum: VCarve - Tips and Tricks
- Topic: Why cant I use the trimming tool
- Replies: 5
- Views: 5890
Re: Why cant I use the trimming tool
Looks like I solved my problem tonight. My circles were microscopically not aligned correctly! Maybe one of the circles were on the inside edge, and the other 3" was on the outside edge of the 6" circle. I just deleted the project and re-worked the 5 circles. This time all went as planned! If you ge...
- Thu Sep 06, 2018 6:23 am
- Forum: VCarve - Tips and Tricks
- Topic: Why cant I use the trimming tool
- Replies: 5
- Views: 5890
Re: Why cant I use the trimming tool
Well, I too have this same issue! I decided to bring a few keys along with me for further assistance... Image3.jpg Image4.jpg Image5.jpg Image6.jpg Here, on the last image, it does not show the scissors in action. They are open around the vectors, but they do not cut the vectors of the circle. This ...