Vectric Customer

I am making a canoe 19.5" long 2.250" wide and .750: thick. The canoe is flat full length except for the last 2" which arc's slightly to the end. I cannot figure out how to create a tool path that will create the arc i need for each end. Your help would be greatly appreciated. Thank you. I am using ...

having trouble getting the amana tool data base loaded into my aspire program. Any help would be greatly appreciated. Thank you.

This is what I am trying to do. I have a board 6' long 8" wide 1.125 thick, the first 3' has to have a slight curve from side to side. I want 2" of the center of the board full thickness and curve off both sides to the bottom of the board. Thank you for you help...

profile

The board I am cutting, the toolpath is starting on the left side and I need it to start from the other end. How would I change the start point? I am using Aspire. I appreciate anyone's help. Thank you...

Trying to make a beaver flesher board. The board is 8" wide and 6' long, the first 3' of it has a slight contour from one side to the other. Can I do this in 2D or does it have to be done in 3D. Please be easy on me I am a newbie to the cnc world. I use Aspire. Thank you...

Yep, that was it. works fine now. Can't thank you enough. Thanks sooooo much...

Trying to do an inlay, problem I'm running into is when I try to mirror the image. I select the 2D view and highlight the image, then I create a new layer and label it "inlay" then I copy my image to the inlay layer I just created. When I flip it I get a double image, one image is flipped from the o...

WOW, I sure did open up a can of worms. I certainly did not mean to create any problems for anyone. First of all I am a newbie to the cnc world, and I have so much to learn, and I am a slow learner. I sincerely appreciate everyone's help. I realize it is important to have a flat board to begin with....

Thank you for the quick reply. I like to have the ability to un-group the letters of a word because sometimes if your board is not perfectly flat some letters may be cut deeper than others, by having the ability to un-group you can select just the letters you want to make a little deeper without cut...

If I create a word by typing, for exampe: (GOLDEN) and want to V-carve it, when I select the word GOLDEN the whole word is grouped, but if I select to un-group it, it still is grouped. Is there a way to un-group the word? I appreciate anyone's help. Thanks...

I did what you suggested and it fixed the problem. Thank you, I sincerely appreciate your help...

I am using the latest version of aspire. I have a Laguna swift cnc which I have selected as my post processor. When I go to save my work or do anything else, my post processor changes, it won't keep my Laguna swift as my post processor. Every time I re-enter Laguna Swift, it will change it to someth...

I am now getting the drift of it, I appreciate your replies they are surly helpful in understanding this. Thank you...

I have a question that I have always wondered about so I thought I would ask. If you are doing a 3D project and you have a high setting selected in the Modeling resolution, when you go to your tool path selections and select your roughing tool path and then your finishing tool path, your finishing t...