Search found 108 matches

by mohamed
Wed Jul 22, 2020 7:10 pm
Forum: VCarve - General
Topic: Move tool and nodes
Replies: 7
Views: 153

Re: Move tool and nodes

You could also just do it using Quick Keys without opening the dialog. Just start dragging the node and type the value(s) as per the table in the link below. https://docs.vectric.com/docs/V10.5/VCarvePro/ENU/Help/page/keyboard-shortcuts/ https://docs.vectric.com/docs/V10.5/VCarvePro/ENU/Help/form/no...
by mohamed
Fri Jul 17, 2020 9:30 pm
Forum: VCarve - General
Topic: toolpath template no longer works
Replies: 26
Views: 770

Re: toolpath template no longer works

Please update to 10.505 and let us know if this doesn't fix your issue. Thank you
by mohamed
Tue Jul 14, 2020 5:19 pm
Forum: VCarve - General
Topic: User-Defined Folders
Replies: 3
Views: 172

Re: User-Defined Folders

We have added 2 features recently that may help with this a little bit, Tool database specifically, you can upload your database to your portal account (through the Tool Database Dialog) and then sync between your various instances on the different PCs. The sync doesn't happen automatically so you'l...
by mohamed
Sun Jul 12, 2020 8:20 pm
Forum: Aspire - General
Topic: Failed to connect to tool database
Replies: 3
Views: 188

Re: Failed to connect to tool database

Could you post the log files please? Perhaps you have another instance running that's locking something up so maybe try restarting.
by mohamed
Thu Jul 09, 2020 9:17 pm
Forum: Laser Module - General
Topic: Laser module and Nextwave
Replies: 8
Views: 404

Re: Laser module and Nextwave

Thank you once again, Mohamed, I have made note of the PP changes for the Next Wave CNC laser. Where might I find the data for the next wave 2-watt laser, looking for the speed rate and kerf so that I can adjust the tool in the DB The kerf and speed are values that depend on the material properties...
by mohamed
Thu Jul 09, 2020 8:40 pm
Forum: Aspire - General
Topic: Aspire V10.5 is OUT NOW!
Replies: 21
Views: 4089

Re: Aspire V10.5 is OUT NOW!

Fast44 wrote:
Wed Jul 08, 2020 10:06 pm
Thank you. What about the cnc shark laser Post processor?
Please see Edward's reply here
viewtopic.php?p=256646#p256646
by mohamed
Thu Jul 09, 2020 2:25 pm
Forum: Laser Module - General
Topic: Laser module and Nextwave
Replies: 8
Views: 404

Re: Laser module and Nextwave

I did do the update to 10.503 and I see where they have added back the CNC Shark Post Processors along with the Piranha. Please take a look at Edward's response regarding the Shark and Piranha posts here ( https://forum.vectric.com/viewtopic.php?p=256646#p256646 ). The hybrid post you're looking fo...
by mohamed
Thu Jul 09, 2020 12:01 am
Forum: Laser Module - General
Topic: Laser module and Nextwave
Replies: 8
Views: 404

Re: Laser module and Nextwave

Migrating the DB copies over your old database and doesn't attempt to merge it into the new one. So the new tools defined in the 10.5 database will have been overwritten unfortunately. Those tools can be exported from the new database and then imported back into your migrated one. A back up of the o...
by mohamed
Wed Jul 08, 2020 10:45 pm
Forum: VCarve - General
Topic: V10.5 Feedrate missing
Replies: 18
Views: 917

Re: V10.5 Feedrate missing

Could you send the project file itself please for us to investigate? The current GRBL post should work with laser and non-laser toolpaths. Power [P] will only output if it's applicable (i.e. it's a laser tool). As far as I can see, we haven't removed any [F]s. Perhaps, also attach the post-processor...
by mohamed
Wed Jul 08, 2020 11:33 am
Forum: Aspire - General
Topic: 10.5 Pocket Toolpath German Translation not complete
Replies: 1
Views: 141

Re: 10.5 Pocket Toolpath German Translation not complete

Hi Thomas,

Thank you for letting us know :) We're in the process of updating the translations, updates will be pushed on a regular basis.

Mohamed
by mohamed
Tue Jul 07, 2020 10:24 pm
Forum: Aspire - General
Topic: Is it Safe to Remove Old Versions
Replies: 6
Views: 418

Re: Is it Safe to Remove Old Versions

Just adding to Adam's comment, uninstalling a version removes all its data including the tool database, so you might want to check the tool database from 10.0 has migrated if you haven't run the migration dialog in 10.5 (perhaps upload and sync it to your portal account through the Tool Database dia...
by mohamed
Tue Jul 07, 2020 9:50 pm
Forum: Aspire - General
Topic: Aspire 10.5 migrate question
Replies: 2
Views: 172

Re: Aspire 10.5 migrate question

Hi Tom,

There is a slight glitch in the logic which shows the migration dialog caused by opening an old version of the software. You don't actually have to run it again after the initial popup. I've added this into our issue tracking system. Thanks for letting us know.

Mohamed
by mohamed
Wed Dec 25, 2019 1:45 pm
Forum: Cut2D - General
Topic: What does the Post_Base command do
Replies: 2
Views: 1160

Re: What does the Post_Base command do

Exactly what Adrian said. Any sections or variables you add to the derived post will override / replace the ones in the base post.
by mohamed
Sun Nov 10, 2019 12:27 am
Forum: Aspire - General
Topic: trouble downloading the newest version of aspire
Replies: 5
Views: 624

Re: trouble downloading the newest version of aspire

The 10.016 installers should have been on the portal by now. If they're not, you can download the patch executable directly from here https://storage.googleapis.com/storage.vectric.com/patches/v10_0/Aspire/patches/Aspire_patch_to_v10016.exe Just run this directly, or if that doesn't work, copy this ...