Vectric Customer

hi Adrian, yes I have looked into the error331 in the user manual and compared my job size to the size shown in AXYZ toolpath software my job is X=1700, y=280, z=48 my machine size in toolpath setup is x=2560, y=1615, z=177.8. So unless there is a function on the controller for the machine that sets...

Right some progress has been made... I got so fed up with the error 331 when using DNC that when it shows up it gives the option to abort the program, up till today I just clicked yes to abort and back to the drawing board. well today I selected not to abort and to run the program and it ran perfect...

Hi All, My headaches continue with my AXYZ 4008 router. I am still struggling to solve my error 331 issue when running this file through DNC. So I thought I would save the vector out of aspire and then load it in AXYZ's toolpath software and see if I could get it to work from there. I am able to loa...

Hi, Size is showing as X=2560mm/Y=1615mm/Z=177.8. All of which match the actual size of the table. The home position in the calibration window is set to 0,0. Previously it was X=85.48/Y=105.5 but I assumed that the previous owner had set this for his last jobs or because he had a fence of some sort ...

Hi John, Thanks for sending me the video. I have managed to run one file through DNC it was a simple straight slot into the spoil board that I could use to line up a fence I wanted to install for a job. All worked well. BUT... When I come to run the actual job the router throws up an error 331, I ha...

Hi All, I have just been given a AXYZ 4008 router and have been using the toolpath software to do some simple exercises. I have noticed that on the PC that came with the router there is the DNC application. Does anyone have any information on how to use this? I am using Aspire 8.5 and can see that I...