Search found 1249 matches

by rej
Wed Feb 24, 2021 10:17 pm
Forum: Post Processors
Topic: Help: Post Processor Pratix S12 with ATC
Replies: 14
Views: 5273

Re: Help: Post Processor Pratix S12 with ATC

400.00 for pp from the company you purchased your machine from? maybe if you bought it used, but you think they would give it to you.
by rej
Fri Feb 19, 2021 5:36 am
Forum: Wrapped Rotary Machining
Topic: cutting 4 flat surfaces
Replies: 5
Views: 1678

Re: cutting 4 flat surfaces

i have no desire to manually rotate the piece. so i will need to learn to edit the gcode. i'll bet there are many people like myself who are intimidated by that. but i think i have a guy who can teach me. thanks for the answer.
by rej
Fri Feb 19, 2021 4:40 am
Forum: Wrapped Rotary Machining
Topic: cutting 4 flat surfaces
Replies: 5
Views: 1678

cutting 4 flat surfaces

my question..... say i wanted to flute 4 flat surfaces, and i don't want to turn the piece of stock manually. can i put it in the rotary and have the rotary turn the piece after the toolpaths are run for each side?
by rej
Thu Feb 11, 2021 9:58 pm
Forum: Aspire - General
Topic: tinnitus
Replies: 22
Views: 1419

Re: tinnitus

it is 4 weeks today. i went to the doctor. they made me an appt for the 23rd to an ent. no ear wax, i was hoping for that. now i'm hoping for ear infection. sure is annoying and worse than that sometimes. but i do sleep for about 5 to 6 hours most nights.
by rej
Wed Feb 10, 2021 5:43 am
Forum: Aspire - General
Topic: tinnitus
Replies: 22
Views: 1419

tinnitus

i am just wondering if anyone here has experienced tinnitus from running the cnc, vacuum pump, dust collector? i've had it for 3 weeks and i was using all three last time without ear protection. but i have done so many times in the past with no problems. but i am 63 now and maybe that makes a differ...
by rej
Fri Feb 05, 2021 7:32 pm
Forum: VCarve - General
Topic: thinking that vectric has changed.
Replies: 37
Views: 2208

Re: thinking that vectric has changed.

vectric reached out to the guy and realized he was not cheating the company. some of you are amazing, always assume the guy is a cheater.
by rej
Thu Feb 04, 2021 7:01 pm
Forum: VCarve - General
Topic: thinking that vectric has changed.
Replies: 37
Views: 2208

Re: thinking that vectric has changed.

i have about 10 years. One time we dealt with the owners. It is not the same. Still a good product, good company. But now driven more by money than customers. Sorry for my view on this, but that is how I feel. I always error on the side of my customer and in this case I would help out the guy at the...
by rej
Thu Feb 04, 2021 6:10 pm
Forum: VCarve - General
Topic: thinking that vectric has changed.
Replies: 37
Views: 2208

Re: thinking that vectric has changed.

ok, i'll clear it up one more time. there are two guys working at the computers. both, and that means two people in case i lost you, do graphic design. in the course of a day, they are up and down to plotters and printers all day. occasionally, that means sometimes, the one who runs the vcarvepro is...
by rej
Thu Feb 04, 2021 2:42 am
Forum: VCarve - General
Topic: thinking that vectric has changed.
Replies: 37
Views: 2208

Re: thinking that vectric has changed.

it's pretty clear to me what is driving vectric these days.
by rej
Thu Feb 04, 2021 2:26 am
Forum: VCarve - General
Topic: thinking that vectric has changed.
Replies: 37
Views: 2208

Re: thinking that vectric has changed.

i'm not sure i can make this much clearer. one person uses the software but sets at two different computers during the day.
vectric has been told this, but refuses to care. gives me a sour taste that they are greed driven now.
by rej
Thu Feb 04, 2021 12:32 am
Forum: VCarve - General
Topic: thinking that vectric has changed.
Replies: 37
Views: 2208

thinking that vectric has changed.

i have a customer i sold a cnc machine to that purchased vcarvepro for their company a few years ago. recently the person who designed the signs for them left. this person did all of their vcarvepro work. so now the bosses son has taken over that role. he sets beside another person who does the grap...
by rej
Tue Dec 22, 2020 9:10 pm
Forum: Aspire - General
Topic: wanting to hire some tool path work
Replies: 6
Views: 594

wanting to hire some tool path work

hi. I have version 9.5 of aspire. I just had a cnc machine built with rotary indexer. I just purchased some chair and table leg stl's and i want to know if anyone would like to toolpath them for me. I would send you the stl and give you the dimensions I want, then you size it and toolpath it and sen...
by rej
Thu Nov 16, 2017 6:48 pm
Forum: VCarve - General
Topic: need help with lockdowel vectors
Replies: 7
Views: 3856

Re: need help with lockdowel vectors

these were given to me at the awfs show in vegas.
but i'm disappointed with this company.
they promised me several things and never came thru with any of them. i think they just want to deal with the big cabinet producers.
by rej
Thu Nov 09, 2017 7:31 pm
Forum: Aspire - General
Topic: 2018 US User Group Meeting - Have your say
Replies: 123
Views: 24434

Re: 2018 US User Group Meeting - Have your say

i would be in favor of a cruise ship. not carnival. NCL for sure.. either getaway or breakaway. beautiful ships, warm weather, plenty to do, great meeting rooms. november would be perfect.