Search found 8 matches

by Brad.At.CNC
Fri Feb 11, 2022 8:29 pm
Forum: VCarve - General
Topic: Textured Panels - Straight Z-Undulating Pattern
Replies: 4
Views: 871

Textured Panels - Straight Z-Undulating Pattern

Textured Panels - Straight Undulating Pattern Anyone have some suggestions as to how to create patterns similar to this? The pattern is straight and the depth undulates (Z). Straight-Undulating-Texture-Panels.jpg You would think it would be straight-forward but I am scrambling. It is not just "Z-sc...
by Brad.At.CNC
Mon Mar 23, 2020 3:42 pm
Forum: Aspire - General
Topic: "W" AXIS POST PROCESSOR
Replies: 9
Views: 3155

Re: "W" AXIS POST PROCESSOR

I am not sure about your particular CNC control system, but with the one that I have worked with, the axis for the second head is usually not referred to directly. Rather, a command is inserted that "redirects" the Z references that follow it to that second vertical axis. There is a related command ...
by Brad.At.CNC
Thu Feb 06, 2020 3:33 pm
Forum: VCarve - General
Topic: Post Processor
Replies: 4
Views: 1871

Re: Post Processor

Vectric products read the PostP or My_PostP directories when starting up, at which time they validate (error check) each .pp file and build a list of "available" post processors. If you add a new post with the Vectric product open, this list of "available" post processors is not updated. You need t...
by Brad.At.CNC
Wed Feb 05, 2020 4:48 pm
Forum: Aspire - General
Topic: Bevelled Edge with Square (Mitered) Internal Corners
Replies: 8
Views: 3058

Bevelled Edge with Square (Mitered) Internal Corners

SquaredMitered Internal Corners.png I would like to be able to use the sample closed vector pictured to: Run a V-Bit (90° inclusive) around the part to create a 45° bevel. The External AND Internal corners should be squared/mitered. The bevel should be within the closed vector. Then run a straight ...
by Brad.At.CNC
Mon Sep 16, 2019 2:07 pm
Forum: Cut2D - General
Topic: The New Map Thread - Show us where you are in the world
Replies: 1424
Views: 4360249

Re: The New Map Thread - Show us where you are in the world

CNC Automation
Vectric 'OEM' Reseller - Thermwood CNC Routers - Canada
220 rue Principale,
St. Zotique, Québec, Canada
J0P 1Z0
by Brad.At.CNC
Tue Dec 18, 2018 7:41 pm
Forum: Aspire - General
Topic: help with kitchen door panels
Replies: 10
Views: 4212

Re: help with kitchen door panels

I believe what Kubic is looking for is to be able to resize the overall door panel BUT maintain the distance relationship between the INNER geometry and the OUTER perimeter of the door. (The rails and stile widths must be maintained no matter what the door size.) "Resizing" using "Set Size" actually...
by Brad.At.CNC
Wed Sep 19, 2018 1:59 pm
Forum: Aspire - General
Topic: pour les gens qui parle francais
Replies: 7
Views: 9122

Re: pour les gens qui parle francais

Pour démarrer l’ Aspire ou VCarve Pro en langage Français- / To start Aspire or VCarve Pro in the French language - Modifiez la cible du raccourci - à la fin de la ligne, remplacez "/lang=ENU" par "/lang=FRA". / Edit the shortcut target - at the end of the line, change "/lang=ENU" to "/lang=FRA".
by Brad.At.CNC
Fri Mar 09, 2018 11:11 pm
Forum: VCarve - General
Topic: quickly drwaing jogsaw shaped pieces
Replies: 6
Views: 2931

Re: quickly drwaing jogsaw shaped pieces

Here is a set of puzzle pieces that I put together. 4x corners, 4x edges and 1x middle.

Hope they are useful!