Search found 9 matches

by pandrade82@gmail.com
Fri May 29, 2020 10:18 pm
Forum: VCarve - General
Topic: Origin Problem
Replies: 19
Views: 1519

Re: Origin Problem

I think my issue is work offset in my UCCNC post processor. The offset in G54 for machine cordinates is set to .5(X) and 1.5(Y), not sure why but will change it to zero and see what happens.

Thanks,
Peter
by pandrade82@gmail.com
Fri May 29, 2020 7:13 pm
Forum: VCarve - General
Topic: Origin Problem
Replies: 19
Views: 1519

Re: Origin Problem

To answer your question which I don't think I did in my previous post I want the outside vector to be centered on the work piece and the inner vectors to align as specified within.

Thanks again,
Peter
by pandrade82@gmail.com
Fri May 29, 2020 7:09 pm
Forum: VCarve - General
Topic: Origin Problem
Replies: 19
Views: 1519

Re: Origin Problem

When I look at my tool paths in VCARVE they are centered on the work piece. When I load the gcode file into UCCNC the toolpaths are no longer centered on the workpiece. If you look at the attached picture the toolpath for the X and Y axis are both offset in the positive direction and are no longer c...
by pandrade82@gmail.com
Fri May 29, 2020 7:02 pm
Forum: VCarve - General
Topic: Origin Problem
Replies: 19
Views: 1519

Re: Origin Problem

Posting the CRV file that did not upload.

Peter
by pandrade82@gmail.com
Fri May 29, 2020 5:29 pm
Forum: VCarve - General
Topic: Origin Problem
Replies: 19
Views: 1519

Re: Origin Problem

I know this is an old post but I have had this problem since I started using my CNC router a few years ago. I too cannot align my toolpaths on the work piece when I load the file into UCCNC. Also have the same issue with Mach3. Is the problem with my VCARVE setup or my CNC router? Please refer to th...
by pandrade82@gmail.com
Wed Aug 02, 2017 12:49 pm
Forum: Cut2D - General
Topic: Support Pages and Frequently Asked Questions
Replies: 164
Views: 1740235

Re: Support Pages and Frequently Asked Questions

Thank you Adrian, much appreciated.

Peter
by pandrade82@gmail.com
Wed Aug 02, 2017 12:43 pm
Forum: Cut2D - General
Topic: New England Meet and Greet
Replies: 4
Views: 2878

Re: New England Meet and Greet

Leo, I might be interested in attending, just came across your post. I'm a newbie newbie and this might be a good time to meet people who have been doing this stuff for awhile. I live in East Bridgewater which I think is about 1 hrs drive.
Regards,
Peter
by pandrade82@gmail.com
Wed Aug 02, 2017 2:06 am
Forum: Cut2D - General
Topic: Support Pages and Frequently Asked Questions
Replies: 164
Views: 1740235

Re: Support Pages and Frequently Asked Questions

Thank you Adrian for your help. Is there a way to re-size with an exact size? For instance if I have a circle that is .250 in diameter and I want to resize to .500 can this be done?

Again thank you for your help!

Peter
by pandrade82@gmail.com
Tue Aug 01, 2017 6:36 pm
Forum: Cut2D - General
Topic: Support Pages and Frequently Asked Questions
Replies: 164
Views: 1740235

Re: Support Pages and Frequently Asked Questions

I'm a new Vectric user so forgive me if I'm not posting my question in the appropriate forum. I'm using VCarve Desktop Ver. 9.008 and have a basic question. I'm trying to resize a circle and can't seem to do this. Seems like it should be a very simple thing to do but checking withing the software an...