Search found 188 matches
- Sun Jan 24, 2021 10:57 pm
- Forum: Aspire - General
- Topic: color core v bit
- Replies: 2
- Views: 1141
Re: color core v bit
Thank you very much for the help!
- Sun Jan 24, 2021 10:19 pm
- Forum: Aspire - General
- Topic: color core v bit
- Replies: 2
- Views: 1141
color core v bit
Hello I have aspire version 10.512. I am trying to add a 30 deg color core bit #14cc302.5 from centurion tools to the data base but do not see how to define the tip as .047 . any help would be appreciated. Thanks Don
- Thu Mar 05, 2020 10:02 pm
- Forum: Aspire - General
- Topic: molding toolpath
- Replies: 1
- Views: 869
Re: molding toolpath
cancel this I had a major BRAIN FART I had designed it on the house computer and brought it to the shop and just needed to reselect the vectors , Sorry Don
- Thu Mar 05, 2020 9:55 pm
- Forum: Aspire - General
- Topic: molding toolpath
- Replies: 1
- Views: 869
molding toolpath
Why do I get this message . I have tried it with as small as a .125 cutter . but the same error
. can I make it cut from the outside in so th over lap would not matter ? Thanks for any help you can give me Don- Sun Jan 27, 2019 11:42 pm
- Forum: Aspire - General
- Topic: Rotating wood grain in Preview
- Replies: 1
- Views: 1380
Rotating wood grain in Preview
Can I rotate the grain in the preview, and if so how thanks Don
- Mon Nov 05, 2018 1:56 am
- Forum: Aspire - General
- Topic: Aspire locks up when saving preview
- Replies: 1
- Views: 1423
Re: Aspire locks up when saving preview
most have been in my computer because after shut down and restart it works , Thanks Don
- Mon Nov 05, 2018 1:42 am
- Forum: Aspire - General
- Topic: Aspire locks up when saving preview
- Replies: 1
- Views: 1423
Aspire locks up when saving preview
after creating this file when i try to save the preview image it locks aspire up and i have to close and reopen i tried it 4 times with the same results
- Sat Nov 03, 2018 3:57 pm
- Forum: Aspire - General
- Topic: jagged edges in preview
- Replies: 6
- Views: 2626
Re: jagged edges in preview
Thanks All for your reply's. it was the preview simulation setting . i had never had it on previous revision set back like that . I love this forum. have a great day . Don
- Sat Nov 03, 2018 3:06 pm
- Forum: Aspire - General
- Topic: jagged edges in preview
- Replies: 6
- Views: 2626
Re: jagged edges in preview
It was set at 3x, and I then changed it to 7x with no change. I thought it might be my graphics card. As this is on my house computer. It was a client file,and was a pdf. Just never seen it before 9.5. So I then upgraded,
- Sat Nov 03, 2018 9:27 am
- Forum: Aspire - General
- Topic: jagged edges in preview
- Replies: 6
- Views: 2626
jagged edges in preview
outline appears with jagged edges has anyone else noticed this , version 9.510. Don
- Thu Oct 18, 2018 3:37 am
- Forum: Design & Make - Aspire
- Topic: changing cut progression
- Replies: 4
- Views: 9347
Re: changing cut progression
I'm sorry for the delay getting back. It is a pocketing tool path, i didn't realize i put it in the design and make section. I box selected the group to get what i posted. and my work around was to do each row separately. I was wondering if there was an easier way than that. thanks again for this fo...
- Mon Oct 15, 2018 7:38 pm
- Forum: Design & Make - Aspire
- Topic: changing cut progression
- Replies: 4
- Views: 9347
changing cut progression
How do I go about changing the order of cut from along the y too along the x . Thanks for any ideas Don
- Mon Oct 08, 2018 3:09 pm
- Forum: Aspire - General
- Topic: eagle scout vectors
- Replies: 3
- Views: 2100
Re: eagle scout vectors
Thanks guys for the files I will post what i come up with when done
- Mon Oct 08, 2018 3:46 am
- Forum: Aspire - General
- Topic: eagle scout vectors
- Replies: 3
- Views: 2100
eagle scout vectors
Does anyone have a clean set of vectors for the eagle scout logo.
- Sun Oct 07, 2018 11:35 am
- Forum: Aspire - General
- Topic: latest upgrade 9.509
- Replies: 9
- Views: 3553
Re: latest upgrade 9.509
Adrian, i had tried that changing it to standard . I have Aspire on the shop computer and also on the house computer and as i was not able to sleep i got up to try changing the cutter size to an 1/8 inch cutter , and it worked but then i changed it back too 1/2 and it was also fast. and so i am back...