Search found 10 matches
- Thu Nov 19, 2020 2:15 am
- Forum: Aspire - Tips and Tricks
- Topic: 3d finishing toolpath operation order
- Replies: 7
- Views: 3735
Re: 3d finishing toolpath operation order
It is not correct to say that Aspire always starts at the lowest point and then move to the highest point. I have a job at the moment which is machining a feature on both sides of a piece of material, similar to a chamfer on both sides of a board but not that simple. I have broken the job into 3 too...
- Mon Sep 10, 2018 6:12 am
- Forum: Gadgets - General
- Topic: V9 Gadgets NOW AVAILABLE
- Replies: 6
- Views: 50635
Re: V9 Gadgets NOW AVAILABLE
Hello Sean,
I have just upgraded to VCarve 9.507 and the apply toolpath template gadget causes a "fatal error".
I use this gadget every single day, it is the most useful feature of VCarve (well almost). Will the gadget be upgraded? If not I will have to go back to V9.0.
David
I have just upgraded to VCarve 9.507 and the apply toolpath template gadget causes a "fatal error".
I use this gadget every single day, it is the most useful feature of VCarve (well almost). Will the gadget be upgraded? If not I will have to go back to V9.0.
David
- Tue Jan 08, 2013 5:15 am
- Forum: VCarve - General
- Topic: Graphic on Plate Production
- Replies: 3
- Views: 2487
Re: Graphic on Plate Production
Hi Jim, There are 32 "plates" per sheet and I am not sure at the moment exactly how many sheets possibly around 10 to 15 sheets. Randall, Thank you for your reply. My original thought was that I would somehow have to create a "font" to do this. You have given me the lead to be able to do this. By th...
- Tue Jan 08, 2013 3:25 am
- Forum: VCarve - General
- Topic: Graphic on Plate Production
- Replies: 3
- Views: 2487
Graphic on Plate Production
Hi, Is there a way, by using the plate production tool, or any other method, to place a different graphic on each plate? I have to produce several hundred "plates" and depending upon the text on the "plate" the graphic to be carved on each plate may be different. The text is no problem it is just th...
- Fri Sep 28, 2012 2:08 am
- Forum: VCarve - General
- Topic: After Nesting deleting a sheet
- Replies: 0
- Views: 1577
After Nesting deleting a sheet
Hi All,
Once a model has been nested is there a way to either add or delete a sheet.
I find on occasion that I need to manually adjust the nesting for a variety of reasons and some times I end up needing an extra sheet or a blank sheet, so I would like to add or delete sheets.
David
Once a model has been nested is there a way to either add or delete a sheet.
I find on occasion that I need to manually adjust the nesting for a variety of reasons and some times I end up needing an extra sheet or a blank sheet, so I would like to add or delete sheets.
David
- Mon Apr 14, 2008 2:12 am
- Forum: VCarve - General
- Topic: Nesting
- Replies: 7
- Views: 4014
Nesting
Yuri,
If you email me the vcarve file of what you want nested and the numbers of copies I will do it for you and email you a vcarve or eps or whatever you need. Please also include the amount of space you require around each item and any other relevant information.
David
If you email me the vcarve file of what you want nested and the numbers of copies I will do it for you and email you a vcarve or eps or whatever you need. Please also include the amount of space you require around each item and any other relevant information.
David
- Wed Sep 12, 2007 1:36 am
- Forum: VCarve - Tips and Tricks
- Topic: Quiet bits
- Replies: 21
- Views: 14755
Jack www.carbitool.com.au is the link they will mail overnight and accept all credit cards, The bit we use is TSPL08S it is 1/4 CED and approx 7/8 CEL I am going by memory here They also have a TSPL04S which is the same geometry but 1/8 CED and 1/2 CEL Both are excellent bits and give superior cut q...
- Mon Sep 10, 2007 1:21 am
- Forum: VCarve - Tips and Tricks
- Topic: Quiet bits
- Replies: 21
- Views: 14755
Jack, We do mostly contract work and a lot of prototyping so we cut a variety of materials, plastics, mdf, ply, non ferrous metals veneers etc. We cut 18mm ply quite frequently as well as heaps of 6mm ply and we always use a 6mm single flute left spiral solid carbide from Carbitool. We buy them 10 a...
- Sun Sep 09, 2007 11:56 am
- Forum: VCarve - Tips and Tricks
- Topic: Quiet bits
- Replies: 21
- Views: 14755
Jack Sorry to chime in again but after re reading your post, I think you feeds and speeds may be partly to blame as well Check out the Onsrud website they give fairly good chip load numbers but they are specific to their products. Check with the manufactuer of your bits and they will give a chip loa...
- Sun Sep 09, 2007 11:33 am
- Forum: VCarve - Tips and Tricks
- Topic: Quiet bits
- Replies: 21
- Views: 14755