Search found 8 matches

by Drifter
Thu Sep 13, 2018 7:23 pm
Forum: Post Processors
Topic: Chinese laser post processor for Vcarve Pro
Replies: 3
Views: 4118

Re: Chinese laser post processor for Vcarve Pro

I contacted Vectric also on this. They had said that it's a DFX file and that laser machine tool control software uses. I could export it from Vcarve pro as a dfx file. Then open it in laser machine tool control software to assign the cutting parameters. It works perfectly:)
by Drifter
Wed Sep 12, 2018 9:47 pm
Forum: Post Processors
Topic: Chinese laser post processor for Vcarve Pro
Replies: 3
Views: 4118

Re: Chinese laser post processor for Vcarve Pro

Thanks for the reply :D I was hoping someone had already come up with a post processor for this lol. Being lazy not wanting to learn another software program when I already know Vcarve pro and how to make it work with the laser attachment for my cnc. I've been able to use the laser machine tool cont...
by Drifter
Tue Sep 11, 2018 8:16 pm
Forum: Post Processors
Topic: Chinese laser post processor for Vcarve Pro
Replies: 3
Views: 4118

Chinese laser post processor for Vcarve Pro

Long story short I picked up a used laser I ran across on Craigslist they where selling for parts. The only issue I have found with this unit is that the usb port they used to plug into the unit was loose, causing it to loose communication with their computer. They said it was stopping and locking u...
by Drifter
Sun Dec 04, 2016 12:39 am
Forum: Gadgets - Releases
Topic: Dovetail - Toolpath Gadgets
Replies: 26
Views: 39878

Re: Dovetail - Toolpath Gadgets

do I need to make a gadgets folder in one of the Vectric folders?
by Drifter
Sat Dec 03, 2016 11:46 pm
Forum: Gadgets - Releases
Topic: Dovetail - Toolpath Gadgets
Replies: 26
Views: 39878

Re: Dovetail - Toolpath Gadgets

Good evening,

I'm trying to install the dovetail gadget in version 8.0 I have 8.5 also but read someplace 8.5 doesn't have gadgets? i'm not seeing a gadgets tab in 8.0 either :cry:
by Drifter
Wed Aug 24, 2016 1:03 am
Forum: VCarve - General
Topic: Issue with Q and U
Replies: 5
Views: 2784

Re: Issue with Q and U

So there I was comparing files when I realized both U And Q were set to the bottom left corner rather than the center of the piece like the rest of my tiles :oops:
by Drifter
Wed Aug 24, 2016 12:41 am
Forum: VCarve - General
Topic: Issue with Q and U
Replies: 5
Views: 2784

Issue with Q and U

I'm making some large Scrabble pieces. I have made several they are used for names and made it intersect like the game.. any way she asked for a set with Q and U in them. The other letters cut out just like they are made up centered in the piece, Q and U go to the top right corner almost off of the ...