Wow !, As always you are ALL just so helpful.
I can now make progress ( I hope)
Search found 22 matches
- Sat Apr 08, 2017 12:17 pm
- Forum: Aspire - General
- Topic: Metric and Imperial Tools
- Replies: 5
- Views: 3023
- Fri Apr 07, 2017 1:10 pm
- Forum: Aspire - General
- Topic: Metric and Imperial Tools
- Replies: 5
- Views: 3023
Metric and Imperial Tools
All the Vectric Projects etc are set in Imperial measurements. Virtually all my cutters are Metric. If possible I want to avoid having 2 set of cutters (Metric and Imperial.) Question:- Can I just use the nearest Metric equivelant cutter. Or have I got to dig into the piggy bank, and purchase more ?...
- Mon Mar 13, 2017 12:49 pm
- Forum: Aspire - Tips and Tricks
- Topic: Problems setting Z to the base, and NOt tg the top
- Replies: 3
- Views: 3083
Re: Problems setting Z to the base, and NOt tg the top
Thank you both...My goodness everyone is SO helpful.
I was, and will continue to do as Martin suggests.
Adrian I have asked a number of questions in the past several months, and you are always there with a respions...Thank you.
Best wishes
Malcolm (Roskrow)
I was, and will continue to do as Martin suggests.
Adrian I have asked a number of questions in the past several months, and you are always there with a respions...Thank you.
Best wishes
Malcolm (Roskrow)
- Sun Mar 12, 2017 4:13 pm
- Forum: Aspire - Tips and Tricks
- Topic: Problems setting Z to the base, and NOt tg the top
- Replies: 3
- Views: 3083
Problems setting Z to the base, and NOt tg the top
I am trying to do an exercise making bowls, that was shown last summer by Vectric. The set up for sutting the Corian shows material as being .48 (it varies from sgheet to sheet !!0 They show Z as being inon the base and not on the top. This then creates provblems on tool changing. I can do it, but i...
- Sun Feb 19, 2017 5:07 pm
- Forum: Hardware related questions
- Topic: BIG Problems with my CNC
- Replies: 7
- Views: 6898
Re: BIG Problems with my CNC
MY PROBLEM IS SOLVED. Thank you all for trying to assist me. By sheer chance I found what was wrong. I bought this machine diect from China. I had earlierv had a number of issues as to how they had finished my machine. What I discovered was that the Z drive motor is connect to the drive shaft by a l...
- Thu Feb 16, 2017 6:13 pm
- Forum: Hardware related questions
- Topic: BIG Problems with my CNC
- Replies: 7
- Views: 6898
Re: BIG Problems with my CNC
Garylmast, Many thanks for the link.
The last itm in that is MOSt interesting. I will have a word with a Friend whi is a computer Wizz Kid and seek his view.
Best wishes Malcolm
The last itm in that is MOSt interesting. I will have a word with a Friend whi is a computer Wizz Kid and seek his view.
Best wishes Malcolm
- Thu Feb 16, 2017 10:58 am
- Forum: Hardware related questions
- Topic: BIG Problems with my CNC
- Replies: 7
- Views: 6898
Re: BIG Problems with my CNC
Thanks Kipp I will investigate.
Best wishes
Malcolm
Best wishes
Malcolm
- Wed Feb 15, 2017 6:17 pm
- Forum: Hardware related questions
- Topic: BIG Problems with my CNC
- Replies: 7
- Views: 6898
BIG Problems with my CNC
I use a GX -6060 CNC I have had the machine for a little over a year, and have had no problems until now. It appears that the X and Y axis are both working fine. But the Z axis has gone mad. If I set it up so that everything is set up that zero is the bottom left corner. It starts correctly, but wit...
- Wed Jan 18, 2017 12:10 pm
- Forum: Aspire - General
- Topic: Engraving a nameplate
- Replies: 3
- Views: 2883
Engraving a nameplate
I am trying to engrave a nameplate in brass to put on a Rockinghorse comemerating it as a gift from a Grandmother to her Granddaughter for her Christening. The Finished item will be 70 x 50 (mm) x 3mm thick I have tried a couple of test pieces, but nothing appears to look like a "Professional Job" W...
- Mon Oct 31, 2016 5:51 pm
- Forum: Aspire - General
- Topic: Toolpath problems.
- Replies: 8
- Views: 4354
Re: Toolpath problems.
I really do thank you ALL for your suggestions. My Z setting were correct in both Aspire, and in Mach ( I always zero Z using a cigarette paper. It seems my main problem was confusing seconds and minutes. Having sorted that out all sems to be working fine. No doubt I will be back with some future pr...
- Sun Oct 30, 2016 6:18 pm
- Forum: Aspire - General
- Topic: Toolpath problems.
- Replies: 8
- Views: 4354
Re: Toolpath problems.
Yes you are all correct. I have now adjusted the speed to 500 per minute. Is that about right . I have not yet tested it. If not could someone give me a rate per minute. I am cutting either Acrylic or timber. mostklty Acrylic Z is definitely set at the top (Left hand) corner. Adrian not sure what yo...
- Sat Oct 29, 2016 2:33 pm
- Forum: Aspire - General
- Topic: Toolpath problems.
- Replies: 8
- Views: 4354
Toolpath problems.
I am new to Vectric, having moved from another well knoen Programme ( I gather I cannot mention names) I make Clocks, I have tried to copy the coded from the previous programme into Aspire, but am getting VERY odd results. For example: I am cutting arms for the Skeleton movement. This requires (a) a...
- Sat Oct 29, 2016 2:07 pm
- Forum: Control Software related questions
- Topic: Mach & Problems with Other items such as a dust collectoion
- Replies: 3
- Views: 4493
Mach & Problems with Other items such as a dust collectoion
I use Mach 3, and on occasions my CNC will just stop/freeze. I am told that is is a problem that Mach 3 does not like othe Electric motors being used with it. I have a Henry, that I use to collect my cuttings. Most of the time it works just fine, BUT if I am going a lengthy job it is likely just to ...
- Sat Oct 29, 2016 1:47 pm
- Forum: Aspire - General
- Topic: James is moving on!
- Replies: 51
- Views: 69904
Re: James is moving on!
James, I am new to Vectric, and Aspire. I was at the User Group in September and REALLY apreciate all you have done, and do.
Since then we have had a few emails.
Personally I will miss you very much, and really do wish you a fantastic futurein whatever direction you choose to go.
Malcolm
Since then we have had a few emails.
Personally I will miss you very much, and really do wish you a fantastic futurein whatever direction you choose to go.
Malcolm
- Tue Oct 11, 2016 11:41 am
- Forum: VCarve - General
- Topic: Inches and MM what has to be set in which format
- Replies: 4
- Views: 2462
Re: Inches and MM what has to be set in which format
Thank you all for your responses. Adrian, what you have now said has made it all (I think) crystal clear. Best wishes to you all