Search found 265 matches
- Mon Apr 01, 2024 5:12 pm
- Forum: Aspire - General
- Topic: Material settings
- Replies: 6
- Views: 368
Re: Material settings
... I have the same PC in the office with the same OS and it works fine, I think I will contact Vectric after Easter Exchange keyboards between the two computers. See if that changes something. Thank you Tex, I tried the other keyboard and mouse but it's still the same, I will try emailing Vectric ...
- Sat Mar 30, 2024 3:52 pm
- Forum: Aspire - General
- Topic: Material settings
- Replies: 6
- Views: 368
Re: Material settings
That's a weird one. Almost sounds like a stuck key or something as I can't see why it would flick through the list on it's own. Yes, Adrian, it is weird, but that is exactly what is happening, I have the same PC in the office with the same OS and it works fine, I think I will contact Vectric after ...
- Sat Mar 30, 2024 3:46 pm
- Forum: Aspire - General
- Topic: Material settings
- Replies: 6
- Views: 368
- Sat Mar 30, 2024 12:53 pm
- Forum: Aspire - General
- Topic: Material settings
- Replies: 6
- Views: 368
Material settings
I was getting a black screen on my preview page and traced it back to material settings on the job setup page, the material settings were stuck on a solid colour which was black, I tried to get a wood colour, but it just quickly flicks through all the options and reverts to a solid colour again I ca...
- Thu Dec 07, 2023 12:40 pm
- Forum: Aspire - General
- Topic: not centering
- Replies: 1
- Views: 1188
not centering
I am trying to cut 2 parallel lines on a piece of MDF 585x377mm I want each line 110 in from the long edge, but I keep getting 105 in from one edge and 115 from the other, everything looks fine in the preview, I have used the tape measure in the software and that shows 110 in from both sides, I have...
- Thu Oct 26, 2023 1:27 pm
- Forum: Laser Module - General
- Topic: Gtech 2.8 laser
- Replies: 12
- Views: 4802
Re: Gtech 2.8 laser
Gary
Has the postprocessor that you linked above JTech NO Z been altered or has it got to be modified, I am getting my Zaxis moving up at the start of the engrave, and then moving down, I need it to stay fixed at 1/8 inch above the material surface, what am I doing wrong
Has the postprocessor that you linked above JTech NO Z been altered or has it got to be modified, I am getting my Zaxis moving up at the start of the engrave, and then moving down, I need it to stay fixed at 1/8 inch above the material surface, what am I doing wrong
- Wed Oct 25, 2023 6:37 am
- Forum: Laser Module - General
- Topic: Gtech 2.8 laser
- Replies: 12
- Views: 4802
Re: Gtech 2.8 laser
Thank's Gary
- Tue Oct 24, 2023 9:21 am
- Forum: Laser Module - General
- Topic: Gtech 2.8 laser
- Replies: 12
- Views: 4802
Re: Gtech 2.8 laser
Can anyone using Picsender tell me why the spindle and the laser both come on when I press the test laser red button also when I start to engrave with the laser with (laser vectors) selected on Picsender the Z axis moves down first
- Tue Oct 24, 2023 7:45 am
- Forum: Laser Module - General
- Topic: Gtech 2.8 laser
- Replies: 12
- Views: 4802
Re: Gtech 2.8 laser
Thank's Gary Can you tell me which post processor you use for laser and where you downloaded it? I was told by J tech to download the post-processor from the cloud on Vectric but when I downloaded all of them the only two for Xcarve were inch and mm, which I already have and nothing for laser My mac...
- Mon Oct 23, 2023 12:21 pm
- Forum: Laser Module - General
- Topic: Gtech 2.8 laser
- Replies: 12
- Views: 4802
Re: Gtech 2.8 laser
Thank you for the linkgrantw wrote: ↑Sun Oct 22, 2023 3:07 pmI believe that this page on the Jtech site may give you what you are looking for
https://jtechphotonics.com/?p=19034
- Mon Oct 23, 2023 12:20 pm
- Forum: Laser Module - General
- Topic: Gtech 2.8 laser
- Replies: 12
- Views: 4802
Re: Gtech 2.8 laser
Thank you wb9tpg
I have a spindle, and I have set $30=255 $31=0, and $32=1
I am using Picsender and it is set to laser vectors but when I click on the button (check laser) both the laser and spindle come on
I really need to read something that I can start from scratch again to learn what I am doing
I have a spindle, and I have set $30=255 $31=0, and $32=1
I am using Picsender and it is set to laser vectors but when I click on the button (check laser) both the laser and spindle come on
I really need to read something that I can start from scratch again to learn what I am doing
- Sun Oct 22, 2023 7:32 am
- Forum: Laser Module - General
- Topic: Gtech 2.8 laser
- Replies: 12
- Views: 4802
Gtech 2.8 laser
Hi, will my Jtech 2.8 laser work with the Laser module, all I can see are the larger lasers on what I am reading, if it does, I need to know what to put in the tool database
- Tue Aug 22, 2023 5:35 pm
- Forum: VCarve - General
- Topic: Spindle and VFD
- Replies: 11
- Views: 1209
Re: Spindle and VFD
Thank's Martin
I have ordered some new hose and I will try that first, I know one is blocked as I tried blowing down it, but the inside of the spindle could also have some dirt in it, I was going to try and flush that out or put an air hose on it to blow it out
I have ordered some new hose and I will try that first, I know one is blocked as I tried blowing down it, but the inside of the spindle could also have some dirt in it, I was going to try and flush that out or put an air hose on it to blow it out
- Tue Aug 22, 2023 2:47 pm
- Forum: VCarve - General
- Topic: Spindle and VFD
- Replies: 11
- Views: 1209
Re: Spindle and VFD
Thank you all, I think Leo is right, I just did a test and the pump is getting the water to spindle ok but the other tube is not returning the water to the water tank, so there is a blockage in that tube, I will order some new tubing and rerun it, and I will get some distilled water, Leo what did yo...
- Tue Aug 22, 2023 11:45 am
- Forum: VCarve - General
- Topic: Spindle and VFD
- Replies: 11
- Views: 1209
Spindle and VFD
I have bought 2 of these spindles and VFD units now, https://www.cnc4you.co.uk/Spindle/Water-Cooled/Spindle-Motor-Single-phase-to-3-Phase-2.2KW-Water-cooled-ER20-with-Matching-VFD the first spindle burnt out so I had to buy the full kit again as they do not sell the spindle on its own, so it now loo...