Vectric Customer

Used selected vectors and that did it.
Thanks again for your help. greatly appreciate it

Trying to create a bowl using the 3d Finish Toolpath to complete the process. The problem is it wants to mill the entire surface of my material instead of just the bowl model. The 2D Roughing toolpaths I have been able to get it to mill just the bowl area. I did create a vector boundary around my mo...

That was it... Thank you all for your help...

Using Aspire Version 11.554 Model from Domes & Dishes Dome 30 I have not worked with modeling for a little while and I am attempting to create a small bowel from clip art. I have looked at this problem and can not figure out why I’m getting a rim cut around my model (see attachment). It appears to b...

It makes sense now that it has been explained.
Thanks for all your help! I really appreciate it.

Maybe a missed understanding. I try and use then command under Offset and Layout Array Copy to duplicate what Array Toolpath creates. Here is the file I'm working with. Need vectors for each part to export in DXF format. Not trying to push this off on someone else but your example has to tool paths ...

Just tried the standard array copy an it does not produce the same results....
It lays things out differently than array copy toolpath... Funny.

I’m using the "array copy toolpath" to mill out about 90 parts. My question is how to easily export a DXF file containing all the vectors for each part? If I just do an export, I only get the original part! I need all 90 as they were laid out on the material rows and columns. Do I need to replicate ...

How do I get you my ini file?

Thanks, Jim, for getting back. I’m trying hard to get just a default configuration to work without errors but no luck. Now I’m getting an error about Dado issues which I cannot figure out... I just want to be able to get just a default configuration to work using .75 material but maybe my tools are ...

I'm getting a warning message that I cannot figure out why. I have all thickness set to .5 but I still get the error.

Made a 3D part to attach to material. Center hole helps find center of material using a center punch to guide you.
This is a other software model.

What are people using to hold square stock in a 3" chuck when the stock will not fit?

Yes, pocket may be the way to go. I did get the gadget to work by the way. Looked on web but could not find any examples of pocket toolpaths for rounding.. My solution to finding depth of cut on corners. For a 4-inch square block 2 times square root of two minus the radius of the enclosed circle sho...

Thanks again everyone help. Starting to make sense now.