Search found 9 matches
- Wed Jan 09, 2019 11:53 pm
- Forum: VCarve - General
- Topic: Recommendation on Wood Selection
- Replies: 11
- Views: 3965
Recommendation on Wood Selection
I'm using the Shark 3.0 CNC machine with Vectric 9.5 software. I've been cutting a lot of plaques using yellow pine purchased from the large box stores (lowes / home depot) and getting a good quality finished and stained product. The issue is the cost of the wood is getting out of hand and I'd like ...
- Fri Sep 28, 2018 7:29 pm
- Forum: VCarve - General
- Topic: Program Support Issue
- Replies: 4
- Views: 1713
Re: Program Support Issue
Adrian,
Thanks for your suggestions but the 3 things you mentioned seem to be in order. The design is using vectric texture wavy lines with a graphic I placed in the middle all of which are on the same level. The texture program without a design ran find with no issues and at the same size.
Thanks for your suggestions but the 3 things you mentioned seem to be in order. The design is using vectric texture wavy lines with a graphic I placed in the middle all of which are on the same level. The texture program without a design ran find with no issues and at the same size.
- Fri Sep 28, 2018 6:58 pm
- Forum: VCarve - General
- Topic: Program Support Issue
- Replies: 4
- Views: 1713
Program Support Issue
Help Please I'm using VCarve Desktop 8.5 and ran into a problem. I'm able to calculate and then preview the tool path with no problem. When I then go to save I get a message : Job Size Exceeds Standard Limits of 25" x 25" but the project size being 12" x 9.25". Any assistance would be greatly apprec...
- Sat May 05, 2018 8:26 pm
- Forum: VCarve - Tips and Tricks
- Topic: Question on Hand Drawn Lines
- Replies: 2
- Views: 2414
Question on Hand Drawn Lines
Thanks in advance for any light you can shed on my questions: I'm using VCarve desktop 8.5. I produce a lot of hand drawn images that I then scan, save as a JPEG and bring in thru Import Bitmap for Tracing and at that point they are all single line images. Then when I use the Trace Bitmap tool all t...
- Sat May 05, 2018 7:20 pm
- Forum: Cut2D - General
- Topic: The New Map Thread - Show us where you are in the world
- Replies: 1424
- Views: 4363611
Re: The New Map Thread - Show us where you are in the world
Thanks for including me on the map:
Copper John
Charlotte, NC 28226
Copper John
Charlotte, NC 28226
- Mon Jul 11, 2016 5:44 pm
- Forum: Cut2D - General
- Topic: Support Pages and Frequently Asked Questions
- Replies: 223
- Views: 2981057
Re: Support Pages and Frequently Asked Questions
Tony,
Thanks for your response.
Alan
Thanks for your response.
Alan
- Thu Jul 07, 2016 6:03 pm
- Forum: Cut2D - General
- Topic: Support Pages and Frequently Asked Questions
- Replies: 223
- Views: 2981057
Re: Support Pages and Frequently Asked Questions
Greetings, I'm relatively new to CNC and need some advise. I have a CNC Shark and have just uploaded the 8.5 version of VCarve desktop. My question is what router bits would you recommend for engraving onto wood using point sizes from 12 to 72. I've looked on Amazon and they show several that are pa...
- Fri Jan 22, 2016 2:18 am
- Forum: VCarve - General
- Topic: File Conversion Question
- Replies: 4
- Views: 2425
Re: File Conversion Question
Thanks for both of your responses.
- Thu Jan 21, 2016 10:46 pm
- Forum: VCarve - General
- Topic: File Conversion Question
- Replies: 4
- Views: 2425
File Conversion Question
I'm new to Vectric and the Forum so please excuse my lack of knowledge. What is the best way to convert a colored JPEG photo or a PDF to gray scale to that it can be pulled into the program and create a tool path. I'm using the VCarve Desktop 8 version.
Thanks
Thanks