Hello,
Remember Vectric has put a lot of effort writing an excellent documentation (RTFM=Read This Fantastic Manual )
Search it for "Pass Depth Control" and you'll get all necessary information regarding pass depth tolerance.
HTH
Search found 1006 matches
- Sun Mar 24, 2024 3:03 pm
- Forum: VCarve - General
- Topic: Tool pass depth vs pocket depth
- Replies: 15
- Views: 490
- Sun Mar 17, 2024 11:47 am
- Forum: Aspire - General
- Topic: 3D Carving Times
- Replies: 12
- Views: 758
Re: 3D Carving Times
Hello, I am surprised that nobody mentions rest machining: https://docs.vectric.com/docs/V11.5/Aspire/ENU/Help/form/Finish%20Machining%20Toolpath/index.html#e7dce7b23a3a Doug wrote: Use the largest bit possible to get the detail you want. If some parts of your design are less detailed than others, y...
- Tue Feb 06, 2024 6:22 pm
- Forum: VCarve - General
- Topic: Spindle speed Following a vcarve version change
- Replies: 16
- Views: 950
Re: Spindle speed Following a vcarve version change
How do you control the spindle speed on your machine? It looks like you have a preset on your VFD and the previous postprocessor didn't transmit any speed command and you were happy with that constant speed. The [S]M3 now transmits the speed defined in your project, which is different and overrides ...
- Sat Feb 03, 2024 5:33 pm
- Forum: Wrapped Rotary Machining
- Topic: Modelling question
- Replies: 9
- Views: 943
Re: Modelling question
Message deleted
- Fri Feb 02, 2024 5:01 pm
- Forum: VCarve - General
- Topic: Spindle speed Following a vcarve version change
- Replies: 16
- Views: 950
Re: Spindle speed Following a vcarve version change
Nicolas,
Did you solve your problem?
Did you solve your problem?
- Mon Jan 29, 2024 3:26 pm
- Forum: VCarve - General
- Topic: Spindle speed Following a vcarve version change
- Replies: 16
- Views: 950
Re: Spindle speed Following a vcarve version change
Could you please post one tap file which used to produce the expected speed setting and one with the speed issue.
You'll probably have to change the file extension from .tap to .txt before attaching it to your message.
Double check the points Adrian mentioned.
You'll probably have to change the file extension from .tap to .txt before attaching it to your message.
Double check the points Adrian mentioned.
- Thu Jan 18, 2024 3:48 pm
- Forum: Aspire - General
- Topic: Versions of software
- Replies: 11
- Views: 1388
Re: Versions of software
Michael,
Searching the forum for topics including "released" will give you some additional results.
Searching the forum for topics including "released" will give you some additional results.
- Thu Jan 11, 2024 11:14 am
- Forum: VCarve - General
- Topic: Dot Halftone
- Replies: 8
- Views: 1053
Re: Dot Halftone
Thanks for this clarification. I understand better now as the cut depth is not 17 but only 5.8mm which is quite reasonnable with a 60° v-bit. It's probably better to limit your pass depth to the maximum value the bit and the CNC can admit rather than 17mm which seems a lot. In this case, all holes r...
- Wed Jan 10, 2024 6:44 pm
- Forum: VCarve - General
- Topic: Dot Halftone
- Replies: 8
- Views: 1053
Re: Dot Halftone
Out of curiosity, what rpm and plunge speed did you use? What material were you engraving?
17mm pass depth with a 60° seems a lot for that machine.
TIA
17mm pass depth with a 60° seems a lot for that machine.
TIA
- Wed Dec 06, 2023 9:28 pm
- Forum: VCarve - General
- Topic: Arbitrary circles on Snapmaker
- Replies: 17
- Views: 5072
Re: Arbitrary circles on Snapmaker
Same problem, same solution. See my previous post and edit your post processor or change for another one. Snapmaker is based on Marlin which uses relative mode for IJ parameters: https://marlinfw.org/docs/gcode/G002-G003.html Check the gcode you generated with Vcarve and you'll probably see it uses ...
- Mon Nov 20, 2023 12:38 pm
- Forum: VCarve - General
- Topic: Display guide line numbers
- Replies: 13
- Views: 2628
Re: Display guide line numbers
Hi, I'm wondering if you're not simply misinterpreting the number field in the guide property dialog box. It' not a reference to a guide line numbering, but the number of guides you want to create. The select new guide checkbox (not described in help) allows you to create new guide(s) from the last ...
- Sun Oct 22, 2023 5:29 pm
- Forum: Aspire - General
- Topic: STL Handling in Aspire vs Fusion
- Replies: 13
- Views: 1632
Re: STL Handling in Aspire vs Fusion
How does your stl look when you open it with Meshlab?
- Sun Oct 22, 2023 5:05 pm
- Forum: Aspire - Tips and Tricks
- Topic: Creating an STL?
- Replies: 5
- Views: 2165
Re: Creating an STL?
Did you try using Meshlab decimation features in order to reduce the number of triangles?
It can dramatically reduce the number of triangles without perceptible alteration of the final part.
Given the effect of the mesh size in your process, this could be worth giving it a try.
It can dramatically reduce the number of triangles without perceptible alteration of the final part.
Given the effect of the mesh size in your process, this could be worth giving it a try.
- Sat Sep 16, 2023 2:41 pm
- Forum: VCarve - General
- Topic: 11.5 update
- Replies: 4
- Views: 938
Re: 11.5 update
Maybe he'd rather move the bench than the piano?sharkcutup wrote: ↑Fri Sep 08, 2023 7:00 pmHow much trouble is it to move the Computer from the Machine to an Internet Connection download the Software Update then Move Computer back to machine after install/download? This way you do not have to worry about USB capabilities, etc...!
- Sat Sep 16, 2023 2:33 pm
- Forum: VCarve - General
- Topic: Lithophane
- Replies: 9
- Views: 1060
Re: Lithophane
If you use a search engine, you'll quickly find free on-line and off-line solutions to generate a lithophane stl from a picture. I won't say more as it wouldn't be fair on Vectric's forum. As this feature is now easily available for free, Vectric should add it in Vcarve. IMO, it doesn't make sense c...