Vectric Customer

I built this one over this past winter. 2020-05-02-22.56.46sm.jpg Driving it using a smoothstepper board, 2.2kw liquid cooled spindle. I'm using a cpu radiator and pump in a closed loop system that rides on the back of the carriage. Working area is about 49" x 49" x 11" with the rotary on the left s...

I'd be interested in the design as I have an old 1322 as well as a 1377 that it would probably work with. Great design. I clicked your contact info, but it's only showing a website that isn't active.

I don't know if there are any barcade plans on the site below, but they have a lot of full sized ones that have been reproduced, free, and have vcarve downloads...

https://www.classicarcadecabinets.com

BTW, the vcarves do not contain the tool paths for most, you'll still need to add those.

Do you have a course outline you can post?

Nice solution.

Nice work on the clocks.

Nice work as always Dale...Thank you.

Nice looking call Gary.

Awesome job, I might try it out this weekend...Thanks for the share!

...and when you answer the question of mask, I have another. When I cut through the mask with a downcut bit, it cuts extremely well and there is no lift to the mask. But I am trying to use a 60 degree bit to put get the details of the carving, but the 60 degree/2 flute bit rips the mask and it is d...

Thank you for the file. I really appreciate it. I have never used painters mask before and I have a couple of questions. Do you put it over the wood then let your bit cut the painters mask and the wood at the same time or do you use a vinyl cutter and cut the painters mask then place it over the wo...

Great looking piece!

Great looking piece, well done!

Great looking piece. Thank you for the share, I've got a half dozen of those openers that needed a project to go with for gifts.

Thanks guys and enjoy. I did a couple of coats of lacquer and let them dry on the plaque, then applied a generous layer of the minwax paste wax. I hardly let it dry before laying over the Avery paint mask (sorry don't remember the product number, but it's pretty tacky). I did the carving, then made ...