Search found 150 matches

by CosmosK
Fri Jun 12, 2020 9:59 pm
Forum: VCarve - General
Topic: New Drag Knife
Replies: 56
Views: 19018

Re: New Drag Knife

Got a new one out: Adjustable Offset Drag Knife https://cosmos-industrial.com/images/3005-300.JPG Adjustable Offset: 2-12mm (~1/16 - 1/2”) Blades: Any standard sized utility blade. This lets you use HSS, Tin coated or Carbide edged blades. Set screw is used to recall offset position between blade ch...
by CosmosK
Fri Feb 21, 2020 11:24 pm
Forum: VCarve - General
Topic: New Drag Knife
Replies: 56
Views: 19018

Re: New Drag Knife

Back in stock after 2.5 years! The new model features a 7075 AL body (previously 6061). This is good for durability and thread strength. It is gray anodized as well. Three models to choose from. https://cosmos-industrial.com/index.php?main_page=index&cPath=4 https://cosmos-industrial.com/images/3005...
by CosmosK
Sun Feb 17, 2019 9:37 pm
Forum: VCarve - General
Topic: New Drag Knife
Replies: 56
Views: 19018

Re: New Drag Knife

Yes, it is the same as the blade offset. I'm working on bringing these back online. I will update when they are back in stock. Thanks
by CosmosK
Fri Apr 27, 2018 1:06 pm
Forum: VCarve - General
Topic: New Drag Knife
Replies: 56
Views: 19018

Re: New Drag Knife

I discontinued the product as I got busy with other stuff and it's fairly difficult to make. There should be a couple other options out there. Thanks
by CosmosK
Thu Apr 26, 2018 10:22 pm
Forum: Aspire - Gallery
Topic: 1st use of plotter pen
Replies: 31
Views: 14928

Re: 1st use of plotter pen

Depends on your machine. Might be an manual switch or might need a dedicated post processor that does on turn it on.
by CosmosK
Thu Jul 13, 2017 2:55 am
Forum: Hardware related questions
Topic: Shopbot Buddy or CAMaster Stinger1??
Replies: 33
Views: 9882

Re: Shopbot Buddy or CAMaster Stinger1??

CosmosK wrote:but I don't know where I heard that or if it's true
I also said this though^^ :) Glad to hear that. Camaster has good support as well. They seem very similar. I want to say Shopbot has been around longer, but don't know.
by CosmosK
Thu Jul 13, 2017 1:56 am
Forum: Hardware related questions
Topic: Shopbot Buddy or CAMaster Stinger1??
Replies: 33
Views: 9882

Re: Shopbot Buddy or CAMaster Stinger1??

So the comparison I made if done today would be: PRS Standard 48x48: $12,200 Camaster SR-44: $12,995 Shopbot you provide a computer, Camaster it is included (with Cut2D). So, there's the difference. For me, I put value on a system that I could plug in and start running. I didn't want to worry about ...
by CosmosK
Thu Jul 13, 2017 1:46 am
Forum: Hardware related questions
Topic: Shopbot Buddy or CAMaster Stinger1??
Replies: 33
Views: 9882

Re: Shopbot Buddy or CAMaster Stinger1??

I went with Camaster a while back. If I remember correctly, the price was lower for a turn-key system and the support seemed to be better. I think Camaster supports the whole machine and Shopbot only supports the software, but I don't know where I heard that or if it's true (this would be during the...
by CosmosK
Wed May 03, 2017 6:07 pm
Forum: VCarve - General
Topic: Need seashell model
Replies: 3
Views: 1185

Re: Need seashell model

nice. That's in the standard clip art library? Thanks!
by CosmosK
Wed May 03, 2017 4:20 pm
Forum: VCarve - General
Topic: Need seashell model
Replies: 3
Views: 1185

Need seashell model

Does anyone know if there is a seashell model in the 3D clipart catalog. I haven't downloaded it.. just wondering if anyone knows where I might get a model. Thanks!
by CosmosK
Sun Feb 05, 2017 4:06 am
Forum: VCarve - General
Topic: How to profile cut an open vector
Replies: 10
Views: 3349

Re: How to profile cut an open vector

I've been doing this recently. I do three passes climb, one conventional and a final climb pass on a hard wood part profile. To get the back and forth, I have made them each their own toolpath. That does pretty well, but there are retracts to z safe between the paths, so I go in the code and edit th...
by CosmosK
Sun Jan 08, 2017 6:34 pm
Forum: VCarve - General
Topic: Building a Tool Database
Replies: 21
Views: 5762

Re: Building a Tool Database

I sort my tools in the database by material. So I have a section for soft wood, hard wood, hard plastic, etc. Setting the first group up takes time, but copying after that speeds it up. I do this so I can get the feeds rates where I want them and not have to adjust them. Works well for me.
by CosmosK
Tue Dec 27, 2016 12:50 am
Forum: VCarve - General
Topic: New Issue after "Nose Dive" fixed
Replies: 24
Views: 5217

Re: New Issue after "Nose Dive" fixed

I'd vote for 3D machining the inner pockets. Use a boundary to separate the outer and do that will a much simpler profile operation and a radius cutter for the edge. Those vertical lines can also come from bigger chunks of wood splintering off and getting into the cut. You can hear it when that happ...
by CosmosK
Sun Dec 25, 2016 9:29 pm
Forum: VCarve - General
Topic: New Drag Knife
Replies: 56
Views: 19018

Re: New Drag Knife

Since some people are asking for it and after some thought, I'm going to expand the design to add a couple offsets. I’m going to offer the following models: 1.5mm offset, 1/4" shank (new) 3.0mm offset, 1/4" or 3/8” shank (current) 4.5mm offset, 3/8” shank (new) I’m going to reschedule some stuff and...
by CosmosK
Sun Dec 25, 2016 12:08 am
Forum: VCarve - General
Topic: New Drag Knife
Replies: 56
Views: 19018

Re: New Drag Knife

I'd think you'd be alright, but I haven't tested it yet. If you want to try, I can give you a discount or something and we can see if it works. info@cosmos-industrial.com