Search found 214 matches
- Tue Apr 09, 2024 4:05 am
- Forum: Aspire - General
- Topic: Copy Radios Shape
- Replies: 6
- Views: 481
Re: Copy Radios Shape
Thank you.
- Mon Apr 08, 2024 9:15 am
- Forum: Aspire - General
- Topic: Copy Radios Shape
- Replies: 6
- Views: 481
Re: Copy Radios Shape
Hi Dealguy Thank you for your response. I followed your instructions, and it worked very well, I can tell I got it almost 95% close. but I was wondering if there is any other trick using the modeling create vector boundary, but the only problem is the vector has to be closed, in order for the shape ...
- Fri Apr 05, 2024 6:29 pm
- Forum: Aspire - General
- Topic: Copy Radios Shape
- Replies: 6
- Views: 481
Copy Radios Shape
Hi, what is the most easy and fast way to copy this radios shape edge, I want to just draw the same shape in a cleaner file, I have tried to draw a straight polyline and using node editing option to get as close as possible to the original radios but still not good result. also, tried using modeling...
- Fri Mar 15, 2024 5:35 am
- Forum: Aspire - General
- Topic: How to get More Cleaner finish
- Replies: 8
- Views: 795
Re: How to get More Cleaner finish
Helo professionals, adze, attached is the original size and also my updated size, I have to reduce it to 22X17.6 due to the size of my small CNC machine, I attached a picture for it. my shop main business which is to produce CNC custom cut cabinets parts and edge banding services, which I use a Feld...
- Wed Mar 13, 2024 3:37 am
- Forum: Aspire - General
- Topic: How to get More Cleaner finish
- Replies: 8
- Views: 795
Re: How to get More Cleaner finish
Thank you all for the great information holding the shift key was a great tip, went all the way to maximum 50X slower original image was 1727"X1384" I reduced it to 22"X17.6" now I am planning for 1.2" thick woo slab and will go all the way down. but now using tapered ball nose Amana 46284 tip radiu...
- Wed Mar 13, 2024 1:26 am
- Forum: Aspire - General
- Topic: How to get More Cleaner finish
- Replies: 8
- Views: 795
How to get More Cleaner finish
Helo everyone, I bought this model online, and after downloading and importing to aspire, I downgrade the size for width and length also the height .around 25” X20 “ Trying to get more cleaner result, I carve it on 1.2” thick but looked really bad on the simulation, so I changed the thickness of mat...
- Fri Dec 29, 2023 7:01 pm
- Forum: Aspire - General
- Topic: Radios shape patio door molding
- Replies: 5
- Views: 1609
Re: Radios shape patio door molding
Thank you for all your help,
finally, I managed to make it happen with your ALL great help.
instead of going through the hassle of clamping wood and drum sand it , I have used 3 Alder cutting bords, that was faster and less labor.
finally, I managed to make it happen with your ALL great help.
instead of going through the hassle of clamping wood and drum sand it , I have used 3 Alder cutting bords, that was faster and less labor.
- Mon Dec 25, 2023 5:16 pm
- Forum: Aspire - General
- Topic: Radios shape patio door molding
- Replies: 5
- Views: 1609
Re: Radios shape patio door molding
Helo all Happy Holidays and wish everyone a great saucerful new year. I spent more time digging on the online courses learn you CNC and watched the Molding toolpath, it was very helpful, I accomplished almost 95% of what i want to do, which is radios molding, but the final profile toolpath looks lik...
- Fri Dec 22, 2023 7:21 am
- Forum: Aspire - General
- Topic: Radios shape patio door molding
- Replies: 5
- Views: 1609
Radios shape patio door molding
What is the simplest way to get this shape out of solid wood using CNC. I was digging on line for any helpful videos and also at the learn your cnc courses, but all what I have found is the molding toolpath creates ONLY straight molding not as close to the attached shape which is a long radios with ...
- Fri Dec 22, 2023 6:53 am
- Forum: Aspire - General
- Topic: dip shape
- Replies: 18
- Views: 4098
Re: dip shape
OK I guess I figured it out using a different easier technique, After watching learn your CNC there is something called crop 3D model. Simply I created oversize component curved profile, adjusted the angle and the final height and the combiner mode. And created a smaller shape and selected and cropp...
- Sat Dec 16, 2023 3:14 am
- Forum: Aspire - General
- Topic: dip shape
- Replies: 18
- Views: 4098
Re: dip shape
Hi Steve, I downloaded the file, and will try to adjust the height of the part as it has to be 2.23 inches height. and will try to see how it will work. Steve, yes, you are correct I was trying to do this on my own but could not figure it out, I already bought the learn you CNC on line training for ...
- Sat Dec 16, 2023 1:55 am
- Forum: Aspire - General
- Topic: dip shape
- Replies: 18
- Views: 4098
Re: dip shape
I guess Steve's picture showing the dip go all the way so it is not pocket shape, the main goal is to have the back curved down with the depth of the dip. it will only show better when view from the back. i was trying to get the back to dip down but it stay flat sorry I can not explain by technical ...
- Sat Dec 16, 2023 1:35 am
- Forum: Aspire - General
- Topic: dip shape
- Replies: 18
- Views: 4098
Re: dip shape
I got it super closet before, but the customer does not want the straight back, wants the dip to go all the way back.
- Sat Dec 16, 2023 1:14 am
- Forum: Aspire - General
- Topic: dip shape
- Replies: 18
- Views: 4098
Re: dip shape
Yes it has to look like a deep dish but the dip has to go all the way to the back please see attached
- Sat Dec 16, 2023 12:56 am
- Forum: Aspire - General
- Topic: dip shape
- Replies: 18
- Views: 4098
Re: dip shape
yes this is very close but it has to have the spoon shape as it how on my previous attachment.