Search found 119 matches

by monlover
Fri Apr 24, 2020 12:14 am
Forum: VCarve - General
Topic: cut stl 3d model with vcarve pro
Replies: 12
Views: 636

Re: cut stl 3d model with vcarve pro

still did not work i thought maybe something wrong with the file, so i opened another one, still raised base under the model. please find below my setup may be you can find solution. Materiel thickness 3/4 model height .375 zero plane height is 0 as height of model base pocket 3/4 deep please see at...
by monlover
Tue Apr 21, 2020 7:46 pm
Forum: VCarve - General
Topic: cut stl 3d model with vcarve pro
Replies: 12
Views: 636

Re: cut stl 3d model with vcarve pro

Hi, thank you, this is what i want to accomplish and it is working but some little problem, Materiel thickness 3/4, model height 3/8 pocket tool path 3/8 but as you can see at the model level grapes has no base looks good but after tool pah you can see there is very bad base. i have it zero base hei...
by monlover
Mon Apr 20, 2020 8:12 pm
Forum: VCarve - General
Topic: cut stl 3d model with vcarve pro
Replies: 12
Views: 636

Re: cut stl 3d model with vcarve pro

Hi highpockets thanks to all of you helping in this great community, keep the modeling inside as you can see, it looks like clipped option is highly successful as you can see at the attached picture. now I came up with another problem I ran 2, I downloaded some 3D STL files from online grapes files ...
by monlover
Sun Apr 19, 2020 2:13 am
Forum: VCarve - General
Topic: cut stl 3d model with vcarve pro
Replies: 12
Views: 636

Re: cut stl 3d model with vcarve pro

Thank you every one for the great help,
I just upgraded to the V10 it was not painful, only $175 to upgrade,
will try the clipping option and will let your know, how it go's.
will be posting back with the outcome .
Thank you again.
by monlover
Sat Apr 18, 2020 10:44 pm
Forum: VCarve - General
Topic: cut stl 3d model with vcarve pro
Replies: 12
Views: 636

Re: cut stl 3d model with vcarve pro

Model file is for a FULL door, and i want only to extract or cut the bottom panel only and have it on a separate file, so i need to select the bottom part only to be carve the select has to be on the edit modelling level not on the toolpath level. i can not fine any option on vcarve pro to separate ...
by monlover
Sat Apr 18, 2020 9:13 pm
Forum: VCarve - General
Topic: cut stl 3d model with vcarve pro
Replies: 12
Views: 636

cut stl 3d model with vcarve pro

HI I am still using vcarve pro 9.519 As you can see it is a full door, this is how it was downloaded originally, all what I want to do is cut the bottom panel from the original STL file, will be using 5/8 thickness MDF so details would like to be stand brave at least 3/8 high turning everything arou...
by monlover
Sun Mar 29, 2020 8:26 pm
Forum: VCarve - General
Topic: V Grove Fold joint
Replies: 18
Views: 782

Re: V Grove Fold joint

waw this looks great. two questions 1-on your final product you show recessed panel on each side, why you do not cut the middle part at the same time since you have tool changer cnc. 2-do you lay out all operations manually? is there any software you design box and software grove joints by generatin...
by monlover
Sat Mar 28, 2020 6:35 pm
Forum: VCarve - General
Topic: V Grove Fold joint
Replies: 18
Views: 782

Re: V Grove Fold joint

Thank you all for this valuable information, actually, this is a lot of information to digest.
so if material is MDF what is the thickens of skin i have to leave to have a clean fold assuming the CNC is perfectly flat :wink:
also what you recommend the V bit with flat tip?
Thank you.
by monlover
Fri Mar 27, 2020 10:13 pm
Forum: VCarve - General
Topic: V Grove Fold joint
Replies: 18
Views: 782

V Grove Fold joint

Hi,
I am trying to be able to use a v bit 45 to create fold able joint for small boxes or nice clean edge with no nails.
is there any Gadget or easy way to do it instead of creating toolpath for each foldalble edge?
thank you.
by monlover
Mon Feb 17, 2020 11:24 am
Forum: VCarve - General
Topic: Roughing Vs Finishing toolpath
Replies: 17
Views: 1094

Re: Roughing Vs Finishing toolpath

xxry, at the Right section, at the toolpath can not find any tool edit button, I am guessing you are asking for the details for the attached tool path details?
by monlover
Mon Feb 17, 2020 9:24 am
Forum: VCarve - General
Topic: Roughing Vs Finishing toolpath
Replies: 17
Views: 1094

Re: Roughing Vs Finishing toolpath

Flower_Box_3_TP.png Hello every one, thank you for your great help, after some toolpath modification, and did not have a chance to run the actual file here is some results: as you can see the time decreased a lot, the finish toolpath now is 3:39 below is my tool setup: using Zenbot CNC 4X4 with Hit...
by monlover
Fri Feb 14, 2020 10:08 am
Forum: VCarve - General
Topic: Roughing Vs Finishing toolpath
Replies: 17
Views: 1094

Roughing Vs Finishing toolpath

Hi, is it normal the roughing toolpath takes a way longer than the finishing path? at his example the roughing toolpath takes 8 hrs and if i ran the finishing path from scratch it takes 3 hrs and 51 min roughing using 1/4 ball nose at 12000 and 100 Ipm and finishing using 1/4 ball nose at 12000 and ...
by monlover
Wed Feb 05, 2020 7:07 am
Forum: VCarve - General
Topic: Cut the meddle panel
Replies: 3
Views: 527

Re: Cut the meddle panel

Hi
I did no draw any vectors, this image was for sale on line, all what I want to do is just extract the carved panel and carve it separately, where is the level clipping option to try to use it.

Thank you.
by monlover
Wed Feb 05, 2020 6:50 am
Forum: VCarve - General
Topic: Model Plate step down
Replies: 18
Views: 1132

Re: Model Plate step down

Look at this super nice and very very professionalism help masters, I am really super happy and greatly appreciative for all of you Mr highpockets and Mr Dealguy11 Thank you and thanks for all professionals have tried to help, :D all what I did is follow Dealguy11 steps and it came out as you see, t...
by monlover
Tue Feb 04, 2020 10:39 pm
Forum: VCarve - General
Topic: Model Plate step down
Replies: 18
Views: 1132

Re: Model Plate step down

Hi highpockets this is what it has to looks like but still not luck please find below my settings: I Removed the rope to at least not narrow down the problem and make is simple to solve :? 1-At component properties : material High is 1”, shape high .30 base high 0 2-I close window and click on creat...