Search found 54 matches

by AcBCDN
Tue Apr 20, 2021 3:29 am
Forum: VCarve - General
Topic: Experience in Aluminum
Replies: 6
Views: 438

Re: Experience in Aluminum

https://www.nyccnc.com/super-glue-fixturing/ is a good primer for using super glue. I adapted to my setup since I didn't have a vice to start. I have had good success when cutting aluminium on a mini mill; up to half inch material. My best success with super glue is metal on metal (for blue tape) w...
by AcBCDN
Sun Apr 18, 2021 3:20 pm
Forum: VCarve - General
Topic: why do I get this message
Replies: 4
Views: 464

Re: why do I get this message

This happened to me and I went to the program updates area (below) and downloaded the appropriate update manually.


https://www.vectric.com/support/program-updates
by AcBCDN
Wed Dec 16, 2020 5:51 pm
Forum: VCarve - General
Topic: VCarve Pro Update 10.512 -Update.EXE different on two machines
Replies: 2
Views: 431

Re: VCarve Pro Update 10.512 -Update.EXE different on two machines

update.exe does update itself before proceeding with the update. The remainder of the update actually happens through a separate patch file which doesn't The only thing I can think of here is that the update here failed for some reason. There is usually a log file of that part of the process in C:/...
by AcBCDN
Wed Dec 16, 2020 3:39 am
Forum: VCarve - General
Topic: VCarve Pro Update 10.512 -Update.EXE different on two machines
Replies: 2
Views: 431

VCarve Pro Update 10.512 -Update.EXE different on two machines

In the most recent update I received the following error again: error.jpg So I went over to my other computer to see install the update. Well, it worked as expected. After a quick browse of the VCarve Pro folder I compared the update.exe file on each computer. They were different. The one that worke...
by AcBCDN
Tue Nov 03, 2020 9:49 pm
Forum: VCarve - General
Topic: Update Program Error
Replies: 16
Views: 1047

Re: Update Program Error

I went to the https://www.vectric.com/support/program-updates area, downloaded and ran the appropriate patch. It worked!
by AcBCDN
Tue Nov 03, 2020 6:21 pm
Forum: VCarve - General
Topic: Update Program Error
Replies: 16
Views: 1047

Re: Update Program Error

martin54 wrote:
Tue Nov 03, 2020 6:11 pm
What kind of update are you trying to do? If it's an update from 10 to 10.5 then you need to do a complete new instal of 10.5 you can't use the blue update icon in the top right of the screen :lol: :lol:
10.507 to 10.509 update
by AcBCDN
Tue Nov 03, 2020 5:30 pm
Forum: VCarve - General
Topic: Update Program Error
Replies: 16
Views: 1047

Update Program Error

I received the following error when trying to use the update program. Any ideas as to what might be causing this? Windows is up to date. Fresh reboot was done prior to retry. No other applications were opened.

Thanks

error.jpg
by AcBCDN
Sun Jul 12, 2020 4:15 am
Forum: VCarve - General
Topic: How could I do something like this?
Replies: 8
Views: 1291

Re: How could I do something like this?

I created the text so it was flat across the top, not following the curve. I used the WAVE tab in one level and the RECTANGLE tab in another level. Along with the new clipping feature this was the result. And this was the result. By adjusting the rectangle tab height you can and increase the height ...
by AcBCDN
Sat Jul 11, 2020 5:27 pm
Forum: Aspire - General
Topic: Just Because You Can. . . . .
Replies: 18
Views: 1730

Re: Just Because You Can. . . . .

Good speed here.
PingTest.jpg
by AcBCDN
Wed Jun 17, 2020 8:04 pm
Forum: Gadgets - User Submissions
Topic: Easy Euro Door Hinges Maker
Replies: 23
Views: 4547

Re: Easy Euro Door Hinges Maker

Hello all, I'm needing your assistance. Some users are having a challenge with the help button I have coded in the gadgets. The help button should open a new browser window connected to the wiki help page. Attached is a small gadget with a dialog box with five Help button options for opening the "w...
by AcBCDN
Wed Jun 17, 2020 7:42 pm
Forum: Gadgets - User Submissions
Topic: Easy Euro Door Hinges Maker
Replies: 23
Views: 4547

Re: Easy Euro Door Hinges Maker

Hello all, I'm needing your assistance. Some users are having a challenge with the help button I have coded in the gadgets. The help button should open a new browser window connected to the wiki help page. Attached is a small gadget with a dialog box with five Help button options for opening the "w...
by AcBCDN
Wed Jun 17, 2020 2:40 pm
Forum: Gadgets - User Submissions
Topic: Easy Euro Door Hinges Maker
Replies: 23
Views: 4547

Re: Easy Euro Door Hinges Maker

Okay... Version 4.02 Removed the HTML code and moved it to CSS. Please let me know if it works. New result. Pressing the "Help" button does nothing. I wonder if its my computer "Help" doesn't work on Boxjointmaker or Dovetailmaker. Andy Hi Andy, I will write and post a small test gadget that will h...
by AcBCDN
Wed Jun 17, 2020 4:16 am
Forum: Gadgets - User Submissions
Topic: Easy Euro Door Hinges Maker
Replies: 23
Views: 4547

Re: Easy Euro Door Hinges Maker

jimandi5000 wrote:
Wed Jun 17, 2020 4:00 am
Okay... Version 4.02

Removed the HTML code and moved it to CSS.

Please let me know if it works.
New result. Pressing the "Help" button does nothing.

I wonder if its my computer "Help" doesn't work on Boxjointmaker or Dovetailmaker.

Andy
by AcBCDN
Tue Jun 16, 2020 9:25 pm
Forum: Gadgets - User Submissions
Topic: Easy Euro Door Hinges Maker
Replies: 23
Views: 4547

Re: Easy Euro Door Hinges Maker

Here is the 4.01 hot fix... Version 4.01 will fix the following: 1. Removed and replaced Java script to open new web page to show the help with html code to avoid the Reg issue 2. Fixed the Hinge offset location if overlap is added. Sorry to report that the exact same error occurred with the "Help"...
by AcBCDN
Tue Jun 16, 2020 12:07 am
Forum: Gadgets - User Submissions
Topic: Easy Euro Door Hinges Maker
Replies: 23
Views: 4547

Re: Easy Euro Door Hinges Maker - Error

I am working on it... Questions: 1. What happens when you press the "Yes" button? 2. Is it only the About button When I press the yes or the no nothing visibly happens. All other button or dialog options function as expected. When I press ok the results are generated. So, it appears only the "Help"...