Search found 6 matches
- Tue Feb 16, 2016 5:40 pm
- Forum: Hardware related questions
- Topic: Spindle Frequency?
- Replies: 3
- Views: 3020
Spindle Frequency?
I bought and installed a new 1.5kw water-cooled spindle with an inverter to run it. Now whenever I switch the spindle on it triggers my limit switches (in Mach 3) and I can only reset it when the spindle is not running. I'm virtually at a standstill. Any help?
- Fri Dec 18, 2015 8:18 pm
- Forum: Hardware related questions
- Topic: Spindle speed
- Replies: 4
- Views: 4226
Spindle speed
I use a spindle with a speed controller which is a stand-alone (not configured to the Mach3 software I use). What process or procedure can I use to determine what speed (rpm) my spindle is running.
- Sat Sep 26, 2015 5:26 pm
- Forum: Control Software related questions
- Topic: Tool change and Auto zero plate
- Replies: 3
- Views: 3163
Tool change and Auto zero plate
I want to do two passes (roughing and finishing) with two different bits. Using the auto zero plate to get my zero reference in roughing is no problem. I'll like to know the best way to get z zero ref. after changing to the finishing tool in the home position.
- Sat Sep 19, 2015 12:28 am
- Forum: Hardware related questions
- Topic: Wired Remote Control
- Replies: 2
- Views: 4634
Wired Remote Control
My CNC machine is a DIY which uses a uses a TOSHIBA (TB-6560) driver board controller for the motors. It has a 15-pin input for wired remote control but I can't find any wired remote that is compatible. Any help from those familiar with this driver board?
- Thu Jul 17, 2014 4:47 pm
- Forum: Cut2D - General
- Topic: RE: WRONG SCALE
- Replies: 0
- Views: 1965
RE: WRONG SCALE
I think what zeeway said theoretically makes sense. Will check the mach3 manual (which I must confess I skipped some of the topics), and hopefully will help solve this nagging problem. Will have you posted.
- Tue Jul 15, 2014 5:48 pm
- Forum: Cut2D - General
- Topic: Wrong Scale
- Replies: 2
- Views: 2682
Wrong Scale
I'm new to this. I designed a few texts on Cut2D and used Mach3 to cut a profile, but the output is about double the dimensions I designed. I had to edit the Z axis plunges in order not to break my bit (which I did already on two tries). What am I doing wrong.