Vectric Customer

All will be revealed in the Help menu. There should be an entry for "Tutorials" that will go to the local (your computer) repository for the tutorials.

Perhaps an example of what you consider bad syntax to be would help us?

Up until now it's worked great. Thanks Considering the rest of your post this is a bit of a contradiction. The question I would have to ask is what did you do between when it "worked great" and now that "No matter what I do, the drill bit does not cut through the wood"? Did you upgrade from an earl...

Perhaps some context could be provided.

What are we seeing? Vectors as Randall has posted or an imported bitmap?

Yup. Only those bits that "make sense" for the toolpath are available—in this case v-bits. I suppose you could lie to the software and claim that the TBN is indeed a v-bit. The software will compute paths for that idealized v-bit that will not run well at all with the TBN. If you really are adamant ...

-1 on layer differences. +1 for layers being a red herring. Here's a simple single layer cutfile that has in fact two layers:   single layer.png   A natural consequence of importing a DWG (or DXF) file. that an extra hole has been mysteriously added after "calculating". This suggests a very tiny "du...

You are going to be attaching the file to the message. To that end below the "Save draft", "Preview", and "Submit" button is a tab labelled "Attachments".

Don't use "model boundary" use "selected vector"

Re-installation really should be a last resort.

Again, a screenshot would provide so much more information.

Tested and working fine under VCarve version 12.

Tested and working fine under VCarve version 12.

Tested and working fine under VCarve version 12.

Tested and working fine under VCarve version 12.

If there still is an option to turn on Software Renderer you might try that to see if it could be incompatibility with Parallels' accelerated graphics hardware emulation.

Try looking at the top of the DesignTab under file operations.