Search found 1643 matches

by adze_cnc
Thu Jul 29, 2021 10:00 pm
Forum: Aspire - General
Topic: Marine Digital Elevation Map DEM
Replies: 3
Views: 135

Re: Marine Digital Elevation Map DEM

I think Scott's point was that the information is available via a search engine such as Google or Bing or DuckDuckGo try the terms: bathymetry surveys bathymetric map to STL topological map to STL with sea floor Here's an interesting article: https://hi.stamen.com/creating-3d-bathymetric-maps-with-2...
by adze_cnc
Thu Jul 29, 2021 9:30 pm
Forum: Aspire - General
Topic: Problems V11
Replies: 5
Views: 51

Re: Problems V11

... STL file with layers ... Still seems odd that it would have those names to me but if it worked for you before then you're probably best to report it to Vectric. Adrian, I just tried importing an STL file as a rotary job into VCarve v9.5, The layers "Zero Plane" and "Bounding Box" were not in th...
by adze_cnc
Thu Jul 29, 2021 1:44 am
Forum: VCarve - General
Topic: Geometry Zero
Replies: 12
Views: 302

Re: Geometry Zero

I can and will work around all of them, But it would all be so much eaiser if Vcarve could use the rhino cad zero for imported vectors and objects. Again, we're having trouble deciphering what you mean by "rhino cad zero". Is that Rhino's World Co-ordinate System (WCS) origin? Is that a point relat...
by adze_cnc
Wed Jul 28, 2021 4:27 pm
Forum: VCarve - General
Topic: Unable to upload or download tool database
Replies: 1
Views: 68

Re: Unable to upload or download tool database

Duplicate post. See: viewtopic.php?f=2&t=38006 for active one.
by adze_cnc
Wed Jul 28, 2021 12:44 am
Forum: VCarve - General
Topic: Copy V10 Tool Data To V11
Replies: 3
Views: 135

Re: Copy V10 Tool Data To V11

With changes to the tool database I doubt if you can just copy it over and have it work.

When installing the upgrade did it ask to migrate the took database over? If so this might be of use: https://forum.vectric.com/viewtopic.ph ... 79#p276779
by adze_cnc
Tue Jul 27, 2021 8:49 pm
Forum: VCarve - General
Topic: vector validator
Replies: 15
Views: 360

Re: vector validator

If you mean a text object then … once you convert that to vectors it can’t be edited. Always keep a copy of the original text in another, preferably locked, layer.
by adze_cnc
Tue Jul 27, 2021 5:26 pm
Forum: Aspire - General
Topic: Rest machine 3d finish path in v11
Replies: 15
Views: 515

Re: Rest machine 3d finish path in v11

Much depends on you tool parameters. If you stepover is 1/10,000 of an inch it's going to take a long time to calculate. If it it's 1/1,000 not so much, if it's 1/100 then quick indeed.
by adze_cnc
Tue Jul 27, 2021 5:24 pm
Forum: Aspire - General
Topic: Create Form Tool in Tool Database
Replies: 6
Views: 149

Re: Create Form Tool in Tool Database

Like what Martin said. Only solution: use a square-end cutter and accept that any preview will look wrong. Same thing goes for dovetail bits.
by adze_cnc
Tue Jul 27, 2021 5:20 pm
Forum: VCarve - General
Topic: Geometry Zero
Replies: 12
Views: 302

Re: Geometry Zero

By "other CAM" I suspect you mean RhinoCAM. Similar to what FixitMike mentioned you could draw a box around all your geometry (using the BoundingBox command). The lower left corner will be your "CAD geometry zero". Export and then import into VCarve. You can now move the geometry plus bounding box t...
by adze_cnc
Sat Jul 24, 2021 10:18 pm
Forum: VCarve - General
Topic: Ramps and Tabs
Replies: 4
Views: 128

Re: Ramps and Tabs

jenordyke wrote:
Sat Jul 24, 2021 9:06 pm
so that I get a ramp when the retracted bit reaches the far side of the tab? It only seems logical this would be possible
If a ramp always started on the "far side" of a tab how would the far side of the tab ever get cut vertically?
by adze_cnc
Sat Jul 24, 2021 4:50 pm
Forum: VCarve - General
Topic: Taxes
Replies: 10
Views: 464

Re: Taxes

Technically speaking under the “old” rules you were required to self-asses and remit the HST for your digital puchases yourself—or at the very least the GST portion but not the PST portion (I live in a PST/GST split Province so I can’t say for sure). Individuals didn’t hence, I suspect, the rules we...
by adze_cnc
Fri Jul 23, 2021 9:14 pm
Forum: VCarve - General
Topic: Help Me Justify Upgrading to V11
Replies: 12
Views: 304

Re: Help Me Justify Upgrading to V11

"Buy the best tool that you can afford when you need it” is generally a good rule of thumb.
by adze_cnc
Fri Jul 23, 2021 6:21 pm
Forum: Aspire - Tips and Tricks
Topic: How to assign color inside the toolpath
Replies: 2
Views: 221

Re: How to assign color inside the toolpath

The “dummy” toolpath, for display purposes, that Adrian mentioned could have a depth set to 0.01mm (or 0.001 inches). This is so that the colour of the cut will register but the circle won’t noticebly change thickness.
by adze_cnc
Fri Jul 23, 2021 6:17 pm
Forum: Cut2D - General
Topic: What is the correct way to cut this shape?
Replies: 2
Views: 216

Re: What is the correct way to cut this shape?

If you are looking for a result such as the deer in this post: https://forum.vectric.com/viewtopic.php?p=276493#p276493 then you have some work to do making the vectors acceptable for such a cut. If you are happy with something like martindg’s example then you have everything you need. I’d suggest d...