Search found 4316 matches
- Fri Mar 29, 2024 10:21 pm
- Forum: VCarve - General
- Topic: Understanding Model Position in Material
- Replies: 2
- Views: 51
Re: Understanding Model Position in Material
You probably are missing something. The radio buttons select whether the gap is at the top or bottom of the material. The slider moves the model within the material. Do note, however, that gaps are immaterial if there is no 3D model present (i.e. you only hav 2D vectors and are only making 2D toolpa...
- Fri Mar 29, 2024 10:17 pm
- Forum: Cut2D - General
- Topic: install new tool (roman ogee)
- Replies: 1
- Views: 47
Re: install new tool (roman ogee)
Not knowing what you’ve tried its difficult to say. For any tool that doesn’t match one of the pictures of the predefined types (e.g. not a drill, not an endmill, etc.) you’re left with defining a form tool. And as with most things it’s described in the help system (scroll to the end of the linked p...
- Fri Mar 29, 2024 9:34 am
- Forum: VCarve - General
- Topic: Pro & Desktop compatability
- Replies: 5
- Views: 102
Re: Pro & Desktop compatability
...an oversize job would need to use the Tiling Manager.
- Fri Mar 29, 2024 9:33 am
- Forum: VCarve - General
- Topic: 1/16 Tapered Ball Nose Settings
- Replies: 6
- Views: 154
Re: 1/16 Tapered Ball Nose Settings
I'm not sure where to start here. Does the tool shank really look like it's 5/8"? Does the ball diameter look like 1.6 inches? I suspect the tool you have is this one from Amana Tools. If so, the 0.8 at the Amazon link is 0.8mm (~= 0.03 inches—i.e., a 1/32" radius). The rest is comparing the VCarve ...
- Fri Mar 29, 2024 1:03 am
- Forum: Wrapped Rotary Machining
- Topic: UCCNC & Rotary Control
- Replies: 19
- Views: 515
Re: UCCNC & Rotary Control
A couple of links I found that you might like:
Steven
- Fri Mar 29, 2024 12:24 am
- Forum: VCarve - General
- Topic: Pro & Desktop compatability
- Replies: 5
- Views: 102
Re: Pro & Desktop compatability
VCarve Pro files are compatible with VCarve Desktop.. It's Aspire files that are not compatible with VCarve anything.
- Thu Mar 28, 2024 5:26 pm
- Forum: VCarve - General
- Topic: Considering Vcarve
- Replies: 8
- Views: 208
Re: Considering Vcarve
For Solidworks you can extract the necessary 2D curves (vectors in Vectric parlance) by making a plan view drawing (.SLDDRW)—use an empty template, not one with information boxes, etc. Then export the result as a DWG file. Beware though that I have found that even if you tell Soldiworks to keep clos...
- Thu Mar 28, 2024 9:03 am
- Forum: Cut3D - General
- Topic: Rim around my model
- Replies: 3
- Views: 180
Re: Rim around my model
I haven't had a chance to look at the file but I would suspect that if you click on Material Setup in the toolpath sidebar you'll find a gap above the model. Make that zero in all should be better.
You might need to add a ubiquitous "zero plane" to make the edge cut smoothly.
You might need to add a ubiquitous "zero plane" to make the edge cut smoothly.
- Wed Mar 27, 2024 5:18 pm
- Forum: Aspire - General
- Topic: Pocket Toolpath not Ramping plunge moves
- Replies: 6
- Views: 237
Re: Pocket Toolpath not Ramping plunge moves
Or you could keep the smaller stepover and use the "Spiral Gadget" and a profile toolpath instead of a pocket toolpath. Gadget download link.
- Wed Mar 27, 2024 5:07 pm
- Forum: VCarve - General
- Topic: Enlarge screen view
- Replies: 2
- Views: 194
Re: Enlarge screen view
Perhaps a screen shot of what you consider to be poor details might help us. Windows has a built-in snipping tool for taking screenshots and saving the image to a file. You can even draw highlights and annotations. The saved image file (png or jpg) can be uploaded as an attachment here. https://yout...
- Tue Mar 26, 2024 10:59 pm
- Forum: VCarve - General
- Topic: Vcarve Help Troubleshoot
- Replies: 3
- Views: 191
Re: Vcarve Help Troubleshoot
Good question. I suspect that unless you have a really specific problem and are directed to set it by support that it's an option you can safely ignore.
- Tue Mar 26, 2024 10:56 pm
- Forum: Aspire - General
- Topic: Help needed please
- Replies: 2
- Views: 176
- Tue Mar 26, 2024 8:31 pm
- Forum: VCarve - General
- Topic: text cutting backwards
- Replies: 7
- Views: 238
Re: text cutting backwards
Without any comparator in the photo (e.g. a coin) it's difficult to tell whether the image should be rotated 180 degrees making the text "backwards" (flipped through a vertical axis) or UpsideDown (flipped through a horizontal axis). Having rotated the image 180 degrees it looks more natural than it...
- Tue Mar 26, 2024 7:37 pm
- Forum: VCarve - General
- Topic: text cutting backwards
- Replies: 2
- Views: 140
Re: text cutting backwards
as Jon said dupe.
- Tue Mar 26, 2024 5:17 pm
- Forum: Aspire - General
- Topic: Group Toolpaths from Separate Sheets
- Replies: 2
- Views: 196
Re: Group Toolpaths from Separate Sheets
If you have an automatic tool changer I can sort of see why you might want to group toolpaths from what are disparate projects. But, if you don't have one why wouldn't saving like cutter toolpaths separately and running them sequentially work? Unless you're zeroing off the machine bed you might have...