Vectric Customer

The round weave models that are part of Vcarve PRO. Can they be resized to say
12 inch in diameter and not get larger in width. Any tricks or work-rounds.?

Thank You
Don

Here are the settings for the metric bits. (radius=0.25mm Per side angle B=5.09°) R0.25*D3.175*15*38mm=1pc (radius=0.5mm Per side angle B=4.15°) R0.5*D3.175*15*38mm=1pc (radius=0.75mm Per side angle B=3.20°) R0.75*D3.175*15*38mm=1pc (radius=1.0mm Per side angle B=2.24°) R1.0* D3.175*15*38mm=1pc. Rad...

images here. Sorry

Screen shot on the left are my settings. Right screen is the setting from the Amana tool data base imported into Vcarve Pro11. In the Amana there are no flats I think thier setting are wrong for the engraving tool. Te RCK tools all have a flat setting.They are in the Amana tool data base listed unde...

I am having a problem with some tools
I will post some screen shots soon.

Is there a video or something that describes what exactly info goes
into each box in the tool description.

Thank You
Don

I will check to see if I was doing it with group factors. Thank you for the replies.

I have a design I am working on.It is the Letter L in a Celtic style. I use the edit find open
vectors and it finds none in the design. I go to vcarve and get a message that there are
two open vectors. Has anyone one had this happen. I have provided 2 screen shots.

Thank you that is it,
Don

I have purchased the UGM bundle. I do not see the 2D Vectors
We have included Beki's collection of 20 2D vector designs some of which are shown above.
Does anyone know what folder they are in.

Thank You
Don

Thank you for the replies.
Dymaxion was close but not right.
Martin I will try that.

Don

There is a font on Letter Head fonts I would like to use for a job. $45 is to much for a 1 time use. The font is called Chromeliner http://www.letterheadfonts.com/fonts/chromeliner.php Anyone know of a similar font that is free or low cost.I have checked some of the font sites but nothing I see look...

Thank you for the replies.The reason I asked about oak is that I had some
and thought I would use it. I will get some maple.

Thank You
Don

IMG_0404.jpg I have a project that I will be v-carving small letters. The letters will be .5 to .75 Will oak work will the grain hold and not chip out. Something like this picture This was a practice pieceThis is 6.5 inc and the letters are quite small.This was cut on pine Thank You Don IMG_0402.jpg

What I was referring to was the small edge Vee around the profile. Perhaps this was intentional? Not trying to be picky; just interested. EdgeGroove.png You are not being picky. I appreciate your input. It was not intentional. This was a test so I could see what needs improving. On my next one a wi...