Search found 5 matches

by walter.reinhardt
Tue Jun 11, 2013 6:21 am
Forum: PhotoVCarve - Gallery
Topic: Great Lithos
Replies: 8
Views: 6106

Re: Great Lithos

Hello Wolffie I recommend engrave tools with maximum 60 degrees (half = 30 degrees -> check the small tool-graphic in the editing-tool-box within your tool-database). Engraving-tools, greater than 60 degrees, I had less quality. Recommendation somewhere between 36 and 60 degrees (half = 18 and 30 de...
by walter.reinhardt
Mon Jun 10, 2013 9:37 pm
Forum: PhotoVCarve - Gallery
Topic: Great Lithos
Replies: 8
Views: 6106

Re: Great Lithos

Some more examples
by walter.reinhardt
Mon Jun 10, 2013 9:24 pm
Forum: PhotoVCarve - Gallery
Topic: Another successful picture in wood
Replies: 5
Views: 6737

Another successful picture in wood

Hi there

Material Beechwood 25mm
Engraving-Tool: 0.3mm 60 Grad
Distance between lines approximate 0.75 - 1.00mm
carving depth 2.5 mm

Have fun
by walter.reinhardt
Mon Jun 10, 2013 9:18 pm
Forum: PhotoVCarve - Gallery
Topic: Great Lithos
Replies: 8
Views: 6106

Re: Great Lithos

Hi Wolffie

Detailed settings: the distance between lines is approximate... somewhere near the value I wrote in the previous post.

How to get colors?
Transparent printable foil with printed picture (fotoquality) and fix it on backside of the Litho :D

good luck, have fun
Walter
by walter.reinhardt
Mon Jun 10, 2013 7:08 am
Forum: PhotoVCarve - Gallery
Topic: Great Lithos
Replies: 8
Views: 6106

Great Lithos

After e lot of hours, i figured out the following parameters and configuration.

White translucently thermoplast 2.5 mm
engraving bit 0.3mm - depth 0.75mm/path

distance between lines: 0.132 mm
graving-depth: 1.5mm
speed: 40mm/sec
rpm: 8'500
no cooling

have fun and a lot of luck