Search found 5485 matches

by martin54
Sat Jul 31, 2021 7:33 pm
Forum: VCarve - General
Topic: post processor for Axiom
Replies: 2
Views: 62

Re: post processor for Axiom

When you say it's not listed do you mean the machine isn't listed when you run the kickstarter? If that is the case then is the post processor you were using previously listed in the post processor list? Do you know what controller it uses as that may help. If you don't get a reply then probably bes...
by martin54
Sat Jul 31, 2021 4:43 pm
Forum: Aspire - General
Topic: Plane cut 3d model above a specific Z value
Replies: 8
Views: 102

Re: Plane cut 3d model above a specific Z value

Is this really a 3D job? Looking at what you have posted it looks more like a 2D profile/pocket job which firstly means you don't have to worry about the artifacts & secondly will machine a lot quicker :lol: :lol:
by martin54
Fri Jul 30, 2021 8:28 pm
Forum: VCarve - General
Topic: toolbar moving
Replies: 7
Views: 147

Re: toolbar moving

How have you got it set in the software options? The tabs now appear towards the top & run vertically rather than horizontaly as they did before, try selecting, edit & options & on the tab layout select bottom :lol: :lol: :lol: Ah think Adrian is right on this, I have probably miss read the post :oo...
by martin54
Fri Jul 30, 2021 5:22 pm
Forum: Aspire - General
Topic: V11 - Create Component from Toolpath preview - Glitch?
Replies: 14
Views: 510

Re: V11 - Create Component from Toolpath preview - Glitch?

Must be something to do with it being a double sided job :lol: :lol: If you take your file & make it a single sided job then it works as advertised :lol: :lol: I tried the model that I had used originally but this time made it a double sided job & just machined a couple of pockets on the back, soon ...
by martin54
Fri Jul 30, 2021 1:45 pm
Forum: VCarve - General
Topic: Node Edit imported DXF file in VCarve Pro 9.5
Replies: 7
Views: 190

Re: Node Edit imported DXF file in VCarve Pro 9.5

Not sure if this will help but explains a little, there is a good post on the forum explaining how the vcarve toolpath works but I can't find it :oops: https://support.vectric.com/aspire-questions/item/how-to-set-cut-depth-when-v-carving There is probably more answers to vcarve toolpath in the FAQ's...
by martin54
Fri Jul 30, 2021 1:15 pm
Forum: Aspire - General
Topic: V11 - Create Component from Toolpath preview - Glitch?
Replies: 14
Views: 510

Re: V11 - Create Component from Toolpath preview - Glitch?

I sent a test file to tech support and their answer was: Hello Steve, "Many thanks for your inquiry, I am currently looking into this for you. A way around this is to use the Clear area of selected components outside selected vectors tool, Please see screenshot: https://www.screencast.com/t/HxEyP5z...
by martin54
Thu Jul 29, 2021 7:47 am
Forum: VCarve - General
Topic: Node Edit imported DXF file in VCarve Pro 9.5
Replies: 7
Views: 190

Re: Node Edit imported DXF file in VCarve Pro 9.5

I'm not sure I fully understand the problem, uploading the file always helps but if you can't do that for copyright reasons then screenshots are the next best thing, guessing terminology may be part of the reason for my miss understanding, sounds like you have some 2D clipart as models are not made ...
by martin54
Thu Jul 29, 2021 7:30 am
Forum: VCarve - General
Topic: Version 11 Frustration
Replies: 7
Views: 392

Re: Version 11 Frustration

Have you tried installing or reinstalling the latest version of v transfer? Not something I have ever used so can't help much with that. The other thing I was going to mention was about your settings not being carried over, check all the different types of material listed as my settings were there f...
by martin54
Thu Jul 29, 2021 6:02 am
Forum: VCarve - General
Topic: Unable to upload or download tool database
Replies: 4
Views: 200

Re: Unable to upload or download tool database

Reason I asked how you registered it was because if you had done it online then you have to give permission to conect, I wonder if maybe your anti virus software is preventing the upload/download :lol: :lol: :lol:
by martin54
Thu Jul 29, 2021 5:55 am
Forum: VCarve - General
Topic: Version 11 Frustration
Replies: 7
Views: 392

Re: Version 11 Frustration

You can use the migrate from older version at any time. It is under the help tab at the top of the screen :lol: :lol:
by martin54
Thu Jul 29, 2021 5:42 am
Forum: Aspire - General
Topic: V11 - Create Component from Toolpath preview - Glitch?
Replies: 14
Views: 510

Re: V11 - Create Component from Toolpath preview - Glitch?

Have people tried resetting the toolpath preview simulation as dealguy11 has suggested? I have increased mine to very high (4 x slower) & I don't have any problem deleting the waste material :lol: :lol: :lol:
by martin54
Wed Jul 28, 2021 5:58 pm
Forum: Aspire - General
Topic: Rest machine 3d finish path in v11
Replies: 15
Views: 537

Re: Rest machine 3d finish path in v11

Sir, I have adjusted my stepover and it took about 15 min to update finally. There is no real reason for the rest machining except to speed up the overall carve and to get that smaller detail for the "Last Supper" I carved. I have done 2 so far and I can tell a difference with the rest machining. I ...
by martin54
Wed Jul 28, 2021 1:47 pm
Forum: VCarve - General
Topic: maintain older version of Vcarve Desktop?
Replies: 4
Views: 237

Re: maintain older version of Vcarve Desktop?

I have older versions on my desktop machine where space isn't an issue so I can help some people who are having problems, as dealguy11 has said you will have to make sure you use the older version for any design work done that you want to share with your friend so he will still be able to open the f...
by martin54
Wed Jul 28, 2021 1:41 pm
Forum: VCarve - General
Topic: Copy V10 Tool Data To V11
Replies: 3
Views: 145

Re: Copy V10 Tool Data To V11

Well... Don't know what I did but now its working. Thanks for the help Steve Good to hear that it is working OK now but you would have been better migrating from a previous version rather than moving it, that way a lot of other things you may have done within the previous version will be transfered...
by martin54
Wed Jul 28, 2021 1:37 pm
Forum: VCarve - General
Topic: Unable to upload or download tool database
Replies: 4
Views: 200

Re: Unable to upload or download tool database

Might be best to contact vectric support directly, how did you register the software in the shop? Did you do it online? When you open the tool database do you get the 2 icons to upload & download the tool database, I know if I am at my workshop I have no internet connection so have to tether my pnon...