Search found 7176 matches
- Tue Apr 23, 2024 5:46 pm
- Forum: Hardware related questions
- Topic: Big Changes Coming
- Replies: 11
- Views: 1346
Re: Big Changes Coming
Are you still going to mount it on the wall Ted? Looking forward to seeing more of your creations once it's back up & running
- Tue Apr 23, 2024 10:17 am
- Forum: Aspire - Tips and Tricks
- Topic: Does v12 allow different z-zeros per sheet
- Replies: 5
- Views: 191
Re: Does v12 allow different z-zeros per sheet
Thanks, it seemed like when I tried it, it changed it on both. Thought maybe there was something I was missing. I'll try it again When you add a second sheet it will add a sheet with exactly the same set up as your original sheet, if you then select that sheet & then edit sheet the screen looks the...
- Sat Apr 20, 2024 9:16 am
- Forum: VCarve - General
- Topic: V12 Draw Curves Tool
- Replies: 10
- Views: 439
Re: V12 Draw Curves Tool
If you would like to see it brought back then send a request to Vectric support, the more people that do that the more chance there is of Vectric putting it back, There were a few people on Mark Lindsay's livestream last Sunday who mentioned it & Mark told them to contact support. :lol: :lol: suppor...
- Fri Apr 19, 2024 12:52 pm
- Forum: Control Software related questions
- Topic: Mach3 Any experts out there?
- Replies: 2
- Views: 229
Re: Mach3 Any experts out there?
No idea if there is anyone who would visit your home :lol: :lol: Have you tried asking this question on the mach support forum? You might get better answers on there as it is more focused on mach software :lol: :lol: https://www.cnczone.com/forums/mach-software-artsoft-software-/375486-forum.html
- Fri Apr 19, 2024 12:47 pm
- Forum: VCarve - Tips and Tricks
- Topic: Bottoming out a collet nut
- Replies: 32
- Views: 4548
Re: Bottoming out a collet nut
Read through most of the post & didn't see this mentioned, if you hover over the toolpath in the toolpath list it will tell you the maximum depth that toolpath will cut to which can help with how long the bit you are using needs to be, no it's not collision detection but it can help.
- Fri Apr 19, 2024 10:47 am
- Forum: VCarve - General
- Topic: Post Processor inches or mm
- Replies: 2
- Views: 109
Re: Post Processor inches or mm
As Adrian says it's more about how the machine control software is set up when it comes to post processors, do Fox Alien have a forum as it would be best to ask there or their support if you are not sure yourself.
- Wed Apr 17, 2024 7:21 pm
- Forum: Aspire - General
- Topic: Fender Stratocaster Vector Needed
- Replies: 8
- Views: 291
Re: Fender Stratocaster Vector Needed
Have you tried a search on the forum? Don't know if what you are looking for has previously been posted but do know that some guitar files have been uploaded to the forum in the past
- Wed Apr 17, 2024 2:51 pm
- Forum: VCarve - General
- Topic: GCode Mystery
- Replies: 4
- Views: 267
Re: GCode Mystery
Have you tried saving each toolpath separately to see if that works? Do the toolpaths use the same bit?
I don't know anything about your machine or the control software you are using so no idea how it works with toolpaths
I don't know anything about your machine or the control software you are using so no idea how it works with toolpaths
- Wed Apr 17, 2024 2:47 pm
- Forum: VCarve - General
- Topic: File Operations
- Replies: 2
- Views: 110
Re: File Operations
Just to add to what Adrian has said not only will you get the save icon back but also the undo & redo icons
- Wed Apr 17, 2024 2:34 pm
- Forum: Aspire - General
- Topic: Layers in 12
- Replies: 4
- Views: 199
Re: Layers in 12
Only by adding the sheet number to the layer at the moment, send a feature request to Vectric, I have already done that because I would like to see better management for layers & sheets, hopefully at some point something will be done if enough people ask & it is something that they can do :lol: :lol...
- Mon Apr 15, 2024 11:04 am
- Forum: Aspire - General
- Topic: Aspire 12 and CNC on different computers
- Replies: 6
- Views: 398
Re: Aspire 12 and CNC on different computers
I work in a similar way to Adrian, the CNC machines have their own control computers & these have just the Control software on them they are not connected in any way to the internet. Toolpath files I transfer via a USB stick. I have a design computer at the workshop so if changes are needed then its...
- Sat Apr 13, 2024 9:01 am
- Forum: Aspire - General
- Topic: PM's
- Replies: 5
- Views: 316
Re: PM's
you could try emailing support & asking them for permission to use it if you haven't done so already.
support@vectric.com
support@vectric.com
- Fri Apr 12, 2024 11:16 am
- Forum: VCarve - General
- Topic: 1911 officer model grips
- Replies: 8
- Views: 397
Re: 1911 officer model grips
Try a search on the forum, I know a few different grips have been posted in the past but couldn't tell you which ones or if they are still available for download
- Tue Feb 27, 2024 3:42 pm
- Forum: Aspire - General
- Topic: Inverting Vectric Clipart depth maps?
- Replies: 6
- Views: 480
Re: Inverting Vectric Clipart depth maps?
Not sure I fully understand but I think you are using the wrong tools, the invert function & apply are available in the picture editing tool & I don't think that is what you are trying to do. I think you are trying to create a component that is carved into the material rather than a component that i...
- Tue Feb 06, 2024 7:42 pm
- Forum: VCarve - General
- Topic: Spindle speed Following a vcarve version change
- Replies: 16
- Views: 1059
Re: Spindle speed Following a vcarve version change
Are you using this new computer to run the control software for your machine as well or is the new computer just for your design work.
If you are using the same computer to control your CNC & have installed the CNC control software on it are you sure you have set it up the correct way?
If you are using the same computer to control your CNC & have installed the CNC control software on it are you sure you have set it up the correct way?