I wrote a certified chequesignmarketingman wrote:do a charge back if you used a credit card.
Search found 25 matches
- Tue Oct 15, 2013 12:32 am
- Forum: Hardware related questions
- Topic: dealing with precix
- Replies: 2
- Views: 2231
Re: dealing with precix
- Mon Oct 14, 2013 7:23 pm
- Forum: Hardware related questions
- Topic: dealing with precix
- Replies: 2
- Views: 2231
dealing with precix
dealing with Precix, this has been an experience I gave them my deposit feb. 2013 and I still do not have my machine, I have asked for my money back to no avail.Im at whits end this is now October 14, 2013, I don't know when or if I will ever get it. MILES
- Mon Jun 17, 2013 2:48 pm
- Forum: Aspire - General
- Topic: Bassett Hound
- Replies: 6
- Views: 3476
Bassett Hound
I have been looking all over for a 3D pattern of a Bassett Hound. I have found some dogs, but they are not quite right. Is there anyone out there that has a pattern or knows where I could find a pattern. I use STL files.
I appreciate any help you can give.
Thanks, Miles
I appreciate any help you can give.
Thanks, Miles
- Thu Sep 06, 2012 4:26 pm
- Forum: Aspire - General
- Topic: Looking for someone in the Edmonton area
- Replies: 8
- Views: 3402
Re: Looking for someone in the Edmonton area
Thank you for saying hi. It is nice to have someone else in the area to talk to about this craft. We bought a Sharp Pro HD 2'x2' a few months ago and love doing work. From time to time things dont work the way they should and it is helpful to call on someone. Let me know by email if you want to exch...
- Wed Sep 05, 2012 3:36 am
- Forum: Aspire - General
- Topic: Looking for someone in the Edmonton area
- Replies: 8
- Views: 3402
Re: Looking for someone in the Edmonton area
Hi, we are just starting to practise with Aspire and was looking for someone to call on when we have questions. Plus, we were wondering where the best place was to buy bits, small ones especially. 1/16"bits.
Looking forward to sharing.
Miles and Terry
Looking forward to sharing.
Miles and Terry
- Wed Sep 05, 2012 2:53 am
- Forum: Aspire - General
- Topic: Looking for someone in the Edmonton area
- Replies: 8
- Views: 3402
Re: Looking for someone in the Edmonton area
Hi Craig,
Do you use Aspire. What machine are you using, how long have you been carving?
Are you interested in sharing your email or phone number?
you can respond to mtfairbarn@hotmail.com if you like - or just use this forum.
Thanks, Terry
Do you use Aspire. What machine are you using, how long have you been carving?
Are you interested in sharing your email or phone number?
you can respond to mtfairbarn@hotmail.com if you like - or just use this forum.
Thanks, Terry
- Wed Sep 05, 2012 12:50 am
- Forum: Aspire - General
- Topic: Looking for someone in the Edmonton area
- Replies: 8
- Views: 3402
Looking for someone in the Edmonton area
Hi All,
We live in the Edmonton area of Alberta, Canada. We were wondering if there are anyone in the area that we could call on to exchange information and help? We dont do too bad with Cut3D or V Carve, but are new to Aspire and could use some tips.
Regards, Miles and Terry
We live in the Edmonton area of Alberta, Canada. We were wondering if there are anyone in the area that we could call on to exchange information and help? We dont do too bad with Cut3D or V Carve, but are new to Aspire and could use some tips.
Regards, Miles and Terry
- Fri Aug 17, 2012 1:14 pm
- Forum: VCarve - General
- Topic: Carver3d
- Replies: 10
- Views: 5090
Re: Carver3d
To All,
Thanks to this forum and PayPal resolution center, Carver3D has given us a full refund. They have also offered to adjust the pattern in hopes that it will work with Cut 3D standard axis, if we post this forum saying that we got our money back and it was resolved.
Regards, Miles
Thanks to this forum and PayPal resolution center, Carver3D has given us a full refund. They have also offered to adjust the pattern in hopes that it will work with Cut 3D standard axis, if we post this forum saying that we got our money back and it was resolved.
Regards, Miles
- Mon Jul 30, 2012 7:13 pm
- Forum: VCarve - General
- Topic: Carver3d
- Replies: 10
- Views: 5090
Re: Carver3d
Hi Randell, Here is the parameters in the file; z - 498mm, x - 748mm, y - 31.6mm or Z 19.6", X 29.47", Y 1.22" We are used to Z - being the thickness X - being the width y - being the height There was nothing I could do to make this file work. It even showed it would take around 50 hours and then no...
- Mon Jul 30, 2012 1:07 pm
- Forum: VCarve - General
- Topic: Carver3d
- Replies: 10
- Views: 5090
Re: Carver3d
My apology for the error in the company name. I am referring to CARVER 3D and NOT Vector 3d which raised question to which company. Carver3d has a return policy not to refund money on electronic sales which is understandable. However they have a provision in the Refund Policy that exceptions can be ...
- Mon Jul 30, 2012 11:31 am
- Forum: VCarve - General
- Topic: Carver3d
- Replies: 10
- Views: 5090
Carver3d
has anyone purchased patterns with this company our experience has been terrible the pattern didnt work for us,and they dont want to give back our money either. just letting you all know in advance i would think twice about buying from them
. thank you miles
. thank you miles
- Sun Jul 08, 2012 8:32 pm
- Forum: Cut3D - General
- Topic: Looking for Partridge Pattern
- Replies: 5
- Views: 3334
Re: Looking for Partridge Pattern
Hi Mike,
Yes it did open up as .stl file and I was able to load it into our Cut 3d program. Thank you for sharing this pattern, it helps us out.
Thanks again, Miles & Terry
Yes it did open up as .stl file and I was able to load it into our Cut 3d program. Thank you for sharing this pattern, it helps us out.
Thanks again, Miles & Terry
- Sun Jul 08, 2012 12:14 am
- Forum: Cut3D - General
- Topic: Looking for Partridge Pattern
- Replies: 5
- Views: 3334
Re: Looking for Partridge Pattern
Thanks Mike, but we don't have Aspire yet. We are hoping to get it, so I am looking for something we can do in Cut 3D or VCarve Pro.
Regards, Miles and Terry
Regards, Miles and Terry
- Fri Jul 06, 2012 6:31 pm
- Forum: VCarve - Gallery
- Topic: Cherry House Sign
- Replies: 14
- Views: 7719
Re: Cherry House Sign
Hi Steve,
Thanks for sharing, excellent tips.
Miles & Terry
Thanks for sharing, excellent tips.
Miles & Terry
- Fri Jul 06, 2012 6:03 pm
- Forum: Cut3D - General
- Topic: Looking for Partridge Pattern
- Replies: 5
- Views: 3334
Looking for Partridge Pattern
Hi All, We have been looking for awhile now for a 3d partridge in .v3m or stl format. Does anyone have one to share with us or know who sells this pattern on line? It sure would be appreciated as we have a client that lives on Partridge Rd that wants a house number sign with a Partridge on it. Thank...